A05/105 12x DVD rip hack- 2x4all & rpc1

vbimport

#1

http://forum.firmware-flash.com/viewtopic.php?t=12883

zaitec2 now modded the 2x4all-rpc1 v1.30 firmware to remove the 2x dvd ripping speeds.

i haven’t measured the speed, but ripping a 4.5 pressed dvd now takes 8min for me!

read the entire thread for tips & probs.

flash at your own risk.


#2

I must say that this firmware works perfect!!! It’s the best I have tested.

All my 1x Bulk Princo CD started to work perfect. I can write these media in 2x with out problems. And I can read these DVD’s in all my DVD-players! It’s amasing!

Try it. You will not regreat it. But of course there’s allways a risk.

I say go for these firmware if you want to burn on cheep media. Like Princo or other cheeper 1x media’s. SAVE MONEY!!!

:bow: :bow: :bow:

/Dyzan

My personal dvd-guide for Pioneer A05/105 ( Under Construction)
http://dyzan.myftp.org/network/dvd-guide/

Lite-On firmwares
http://liteon.notrix.net


#3

Jeez, not even a link to rpc1.org even though that’s where the firmware came from? :frowning:


#4

@Dyzan: Would you mind posting a PI/PO measurement? :bigsmile:


#5

@Alexnoe, what do you mean? Explain :slight_smile:

By the way. If you lock at my media test page. you can se that it’s not Princo 2X media i have tested the hacked firmware. Actully on the brands that calls for dvdbulk.net that are rebaged Princo’s or a stolen id i guess. Any way these media was not so good to burn in 1X before. I burn it now in 2X with tha hacked firmware. Works perfekt. :wink:

/Dyzan


#6

@dhc014 Yes there are a link there. But it may is a litle invisible.

Locks like this.

“Hacked firmwares: Read more here”

I will do it more visible.

/Dyzan


#7

Look into the KProbe thread. PI/PO for DVD is something like C1/C2 on CDs


#8

Thanks alexnoe. I will do. :slight_smile:

/Dyzan


#9

DOH! None of my DVD-Readers/burners are compatible with this program.

Well, i gues that I have to buy that Lite-On 163 DVD. :bigsmile:

I will report more then I got it.

/Dyzan


#10

Okej here is some results. But in Nero CD Speed.

First the 2x burned dvd test readed in my dvd-burner.

http://dyzan.myftp.org/network/dvd-guide/test/dvr-105m1.jpg

Then the 2x burned dvd test readed in my old dvd-reader Pioneer 103. ( This reader is very sesitive for bad burns and bad medias. And the results are after then ) :slight_smile: as you can se. som errors in the end. very sesitive dvd-reader. =) Not the best at all.

http://dyzan.myftp.org/network/dvd-guide/test/dvd-103m2.jpg

Now I burned the same DVD-Media (bulkdvd.net (Princo) ) But instead of 2x I burned in 1x! Remember that when I got the original firmware 1.30. I was a bad burn even in 1x.
And again. I test read this DVD-MEdia in my old sesitive DVD-read Pioneer 103. Hmm. The results are amazing!!! no errors at all. And there was many errors before with the original firmware. Not to shabby with this hacked firmware. :smiley:

http://dyzan.myftp.org/network/dvd-guide/test/dvd-103m3.jpg

So… It not bad results with this Princo rebaged DVD’s. Even if Princo are thouse dvd’s that you shuld stay away. In normal cases. I have tested even 3t PRO DVD-Medias. But they still fail in both speed’s even if it has the same as dvdbulk.net, the Princo id. But I don’t exaktly shure that it is the same id on dvdbulk.net and 3t PRO. Probebly diferent speed’s on these.

I have heard that if you run the older firmwares like 1.0 you can burn 3t PRO with out a hitch… Any one can confirm this?

Any way. there are printed down some results in my dvd-guide page. Mainly a page for my own. and not official. But you can lock at it if you want. And I’m glad if you come with some comments.

/Dyzan


#11

Have tested riping a dual layer dvd. And it’s true that the 2x limit is gone.

from 6x - upp to 8.2x is the reading speed with this hacked firmware. :slight_smile: Nice!

/Dyzan


#12

does anyone know if there is a similar release for the a03 and a04 drives? my drives only read at 1.8x.


#13

Originally posted by dhc014
Jeez, not even a link to rpc1.org even though that’s where the firmware came from? :frowning:

if i am not mistaken, the link he posted is to rpc1 isn’t it? it’s just a different domain name, but it is the same forum.

http://forum.rpc1.org/viewtopic.php?t=12883
http://forum.firmware-flash.com/viewtopic.php?t=12883


#14

Originally posted by deeznuts
[B]

if i am not mistaken, the link he posted is to rpc1 isn’t it? it’s just a different domain name, but it is the same forum.

http://forum.rpc1.org/viewtopic.php?t=12883
http://forum.firmware-flash.com/viewtopic.php?t=12883 [/B]

I know that… :stuck_out_tongue:

I was talking about on Dyzan’s page: http://dyzan.myftp.org/network/dvd-guide/links.htm

Since then he has kindly added a link :wink:


#15

oh ok. hehe.