851S Burn Failure at 1% or 3%

vbimport

#1

i really need help with this situation. this burned used to work, i made 1 dvd and then it eventually just died all together. no software is working (nero 6 ultra, sonic recordnow dx, and burnatonce. nothing works, it fails, it’s almost like its not reading any blank disks (can read disks, but cannot read burned discs and cannot burn blank 4X TDK DVD+R). i need help with this problem is anybody can help. here is the log from Nero 6 Ultra:

Windows XP 5.1
IA32
WinAspi: File ‘Wnaspi32.dll’: Ver=4.71 (0001), size=45056 bytes, created 5/6/2002 11:01:14 AM
ahead WinASPI: File ‘C:\Program Files\Ahead\Nero\Wnaspi32.dll’: Ver=2.0.1.56, size=163910 bytes, created 4/2/2003 8:13:44 AM
Nero version: 6.0.0.0
Recorder: <LITE-ON DVDRW LDW-851S> Version: GS0K - HA 0 TA 1 - 6.0.0.0
Adapter driver: <nvidesm> HA 0
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <DVD-16X DVD-ROM BDV316C >Version: .20Q - HA 1 TA 0 - 6.0.0.0
Adapter driver: <> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080P0 YAR4 nvidesm Port 0 ID 0 DMA: ?
CdRomPeripheral : DVD-16X DVD-ROM BDV316C .20Q nvidesm Port 0 ID 0 DMA: ?
CdRomPeripheral : LITE-ON DVDRW LDW-851S GS0K nvidesm Port 0 ID 1 DMA: ?

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 184MB (189052kB)
Memory in use : 63 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

12.7.2004
ISO compilation
11:21:29 PM #1 Text 0 File Isodoc.cpp, Line 5451
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

11:21:29 PM #2 Text 0 File Reader.cpp, Line 118
Reader running

11:21:29 PM #3 Text 0 File Writer.cpp, Line 127
Writer LITE-ON DVDRW LDW-851S running

11:21:29 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3814
First writeable address = 0 (0x00000000)

11:21:29 PM #5 Text 0 File Burncd.cpp, Line 3081
Turn on Disc-at-once, using DVD media

11:21:30 PM #6 Text 0 File DlgWaitCD.cpp, Line 224
Last possible write address on media: 2295103 (510:01.28)
Last address to be written: 2071071 (460:14.21)

11:21:30 PM #7 Text 0 File DlgWaitCD.cpp, Line 229
Write in overburning mode: FALSE

11:21:30 PM #8 Text 0 File DlgWaitCD.cpp, Line 1688
Recorder: LITE-ON DVDRW LDW-851S, Media type: DVD+R
Disc Manufacturer ID: CMC MAG, Media Type ID: E01, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3

11:21:30 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 757
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 2071072 (2071072) = #2071072/460:14.22
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2071072 blocks [LITE-ON DVDRW LDW-851S ]
--------------------------------------------------------------

11:21:30 PM #10 Text 0 File Burncd.cpp, Line 3318
Recorder and media-info

=======================

Burning to LITE-ON DVDRW LDW-851S on a DVD+R media

11:21:30 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 910
Prepare recorder LITE-ON DVDRW LDW-851S for write in cue-sheet-DAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Session Closed, CD fixated
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC “”, FilePos 0 307200 -53104640

11:21:30 PM #12 Phase 24 File dlgbrnst.cpp, Line 1818
Caching of files started

11:21:30 PM #13 Phase 25 File dlgbrnst.cpp, Line 1818
Caching of files completed

11:21:30 PM #14 Phase 36 File dlgbrnst.cpp, Line 1818
Burn process started at 2.4x (3,312 KB/s)

11:21:30 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2104
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0

11:21:30 PM #16 Text 0 File Cdrdrv.cpp, Line 7827
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 03 43 4D 43 20 4D 41 - 47 00 45 30 31 00 38 23 …CMC.MAG.E01.8#
54 37 10 02 38 6A 02 88 - 67 15 15 0B 0B 08 08 01 T7…8j…g…
19 1B 0C 0C 0C 0D 01 00 - 00 00 00 00 00 00 00 01 …

11:21:30 PM #17 Text 0 File dlgbrnst.cpp, Line 1678
Set remaining time: 21:41,405 (1301405ms) -> OK

11:21:30 PM #18 Text 0 File DVDPlusRW.cpp, Line 513
Start write address at LBA 0
DVD high compatibility mode: Yes

11:21:37 PM #19 SCSI -500 File Cdrdrv.cpp, Line 1361
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x03160000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

11:21:37 PM #20 Text 0 File Writer.cpp, Line 455
23:21:37.500 LITE-ON DVDRW LDW-851S : WriteBuffer reduced to 32768 Bytes

11:21:37 PM #21 Text 0 File Writer.cpp, Line 318
23:21:37.531 - LITE-ON DVDRW LDW-851S : Queue again later (Intervall : 19msec)

11:21:43 PM #22 SCSI -1076 File Cdrdrv.cpp, Line 1361
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x03160000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x28
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x28 0x00

11:21:43 PM #23 CDR -1076 File Writer.cpp, Line 335
Disc changed

11:21:43 PM #24 Text 0 File ThreadedTransfer.cpp, Line 227
all writers idle, stopping conversion

11:21:43 PM #25 Text 0 File ThreadedTransfer.cpp, Line 221
conversion idle, stopping reader

11:21:43 PM #26 Phase 127 File dlgbrnst.cpp, Line 1818
Generating DVD high compatibility borders

11:21:43 PM #27 Text 0 File dlgbrnst.cpp, Line 1678
Set remaining time: 0:00,000 (0ms) -> OK

11:21:43 PM #28 Phase 129 File dlgbrnst.cpp, Line 1818
Generating DVD borders completed successfully

11:21:43 PM #29 Text 0 File dlgbrnst.cpp, Line 1678
Set remaining time: 0:00,000 (0ms) -> OK

11:21:43 PM #30 Phase 38 File dlgbrnst.cpp, Line 1818
Burn process failed at 2.4x (3,312 KB/s)

Existing drivers:
File ‘Drivers\ASPI32.SYS’: Ver=4.71 (0001), size=17005 bytes, created 5/6/2002 11:01:08 AM
File ‘Drivers\PXHELP20.SYS’: Ver=2.02.47a, size=17136 bytes, created 1/3/2003 2:02:00 AM (Prassi/Veritas driver for win 2K)
File ‘Drivers
videsm.sys’: Ver=5.10.2600.0307 built by: WinDDK, size=20224 bytes, created 11/13/2002 3:10:00 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


#2

Sounds like a duff drive to me…but have you tried uninstalling Nero completely, restarting the machine and performing a re-install? Also make sure the firmwares upto date, you’re running the latest version of Nero, and that your drive is master on the IDE chain and connected with a ATA100\133 cable.