40125w - Burning Failure with Ner0[long post]

Hi guys. I only found this site today, and sorry that my 1st post is a request for help, but I`ll try and help others out around the board where I can.

Basically, I have had the 40x drive for about a year, and its been great. Only, I have just upgraded my system, and set everything up, but when I try to burn a disc with nero 6, it failed. (Also failed on a previous install of 5.5.9x I also have a NEC DVD 1300A Writer that works just fine with nero 6. - Yet, both the NEC & the lite-on work with clone CD???

The error is


“SCSI command aborted”
“Burning Process Failed at 40x”

I have no SCSI devices or cards installed.

My setup is as follows

Win XP Pro
2.8xp AMD
epox nforce 2 board
1 x 120GB hd
1 x 80GB hd
1024 Ram

I also have daemon tools installed (virtual/stealth drive)

When I attempt to burn with the writer, it spins up, and spins down as if there where crc errors.

Here is the full log from ner0. I have tried many different speeds and media, and this happens on burning from the HD, or on the fly. This log is from on the fly:


Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.56, size=163910 bytes, created 02/04/2003 16:13:43 
Nero version: 6.0.0.0
Recorder:             <LITE-ON LTR-40125W>      Version: WS04 - HA 2 TA 0 - 6.0.0.0
 Adapter driver:      <>                        HA 2
 Drive buffer  :      1984kB
 Bus Type      :      default (0) -> ATAPI, detected: ?
CD-ROM:               <_NEC     DVD_RW ND-1300A >Version: 1f05 - HA 2 TA 1 - 6.0.0.0
 Adapter driver:      <>                        HA 2

=== Scsi-Device-Map ===
DiskPeripheral       : IC35L120AVV207-1        V24O   nvidesm Port 0 ID 0  DMA:  ? 
DiskPeripheral       : IC35L080AVVA07-0        VA4O   nvidesm Port 0 ID 1  DMA:  ? 
CdRomPeripheral      : _NEC    DVD_RW ND-1300A 1f05   nvidesm Port 0 ID 0  DMA:  ? 
CdRomPeripheral      : LITE-ON LTR-40125W      WS04   nvidesm Port 0 ID 1  DMA:  ? 
CdRomPeripheral      : Generic STEALTH DVD            st3wolf Port 1 ID 0  DMA:  ? 
=======================

AutoRun : 1
Excluded drive IDs: 
CmdQueuing     : 1
CmdNotification: 2
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
EraseSpeed     : 0
BUFE           : 0
Physical memory     : 1023MB (1048052kB)
Free physical memory: 680MB (696792kB)
Memory in use       : 33 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

6.10.2003
CD Copy
18:12:43	#1 Phase 90 File dlgbrnst.cpp, Line 1818
	Buffer Underrun Protection activated
	
18:12:43	#2 Text 0 File Reader.cpp, Line 118
	Reader running
	
18:12:43	#3 Text 0 File Writer.cpp, Line 127
	Writer LITE-ON  LTR-40125W       running
	
18:12:43	#4 Phase 48 File dlgbrnst.cpp, Line 1818
	Analyzing disc
	
18:12:47	#5 CDCOPY -1 File CDCopy.cpp, Line 1845
	The CD is copyrighted
	
18:12:49	#6 Text 0 File CDCopy.cpp, Line 2061
	          _Index0_ _______Index1_______ PostPause   ___LastBlockOfTrack_
	Track  1:        0        0 (  0:02.00)    253802     253801 ( 56:26.01)
	
18:12:49	#7 Text 0 File CDCopy.cpp, Line 837
	Copy options:	copy on-the-fly:  ON
		read ISRC/MCN: OFF
		use jitter correction: OFF
		data options
			ignore read error: OFF   write defekt blocks OFF
			read raw data: OFF   read r-w subchannel data: OFF
		audio options
			ignore read error:  ON
			read indexes: OFF    read r-w subchannel data: OFF
	source disc does not look like CD Extra
	01.      0 - 253802 = 253802, data (TRM_DATA_MODE1, block size 2048)
	
18:12:49	#8 Text 0 File Burncd.cpp, Line 3081
	Turn on Disc-at-once, using CD-R/RW media
	
18:12:50	#9 Text 0 File DlgWaitCD.cpp, Line 224
	Last possible write address on media:   359848 (79:59.73)
	Last address to be written:             253801 (56:26.01)
	
18:12:50	#10 Text 0 File DlgWaitCD.cpp, Line 229
	Write in overburning mode: FALSE
	
18:12:50	#11 Text 0 File DlgWaitCD.cpp, Line 1688
	Recorder: LITE-ON LTR-40125W;
	   CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation
	   ATIP Data: ?
	
18:12:50	#12 Text 0 File ThreadedTransferInterface.cpp, Line 757
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 (1 Data (mode 1))
	    2 indices, index0 (150) not provided
	    original CD pos #0 + 253802 (253802) = #253802/56:24.2
	    relocatable, CD pos for caching/writing not required/not required, no patch infos 
	    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 253802 blocks [LITE-ON  LTR-40125W      ]
	--------------------------------------------------------------
	
18:12:50	#13 Text 0 File Burncd.cpp, Line 3318
	Recorder and media-info

	=======================

	Burning to LITE-ON LTR-40125W on a CD-R media
	
18:12:51	#14 Text 0 File ThreadedTransferInterface.cpp, Line 910
	Prepare recorder LITE-ON  LTR-40125W       for write in cue-sheet-DAO
	DAO infos:
	==========
	MCN: 
	TOCTYPE: 0x0   Session Closed, CD fixated
	Tracks 1 to 1:
	   TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 520093696
	
18:12:51	#15 Phase 36 File dlgbrnst.cpp, Line 1818
	Burn process started at 40x (6,000 KB/s)
	
18:12:51	#16 Text 0 File ThreadedTransferInterface.cpp, Line 2104
	Verifying CD position of item 0 (relocatable, no CD pos, no patch infos, orig at #0): write at #0
	
18:12:51	#17 Text 0 File Mmc.cpp, Line 13678
	StartDAO : CD-Text - Off
	
18:12:51	#18 Text 0 File Mmc.cpp, Line 18119
	Set BUFE: supported -> ON , SMART-BURN : ON
	
18:12:51	#19 Text 0 File Mmc.cpp, Line 13976
	CueData, Len=32
	41 00 00 14 00 00 00 00 
	41 01 00 10 00 00 00 00 
	41 01 01 10 00 00 02 00 
	41 aa 01 14 00 38 1a 02 
	
18:13:21	#20 SCSI -500 File Cdrdrv.cpp, Line 1361
	SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x03220000
	Status:     0x02 (0x03, SCSI_ABORTED)
	HA-Status   0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
	TA-Status   0x00 (0x00, OK)
	Sense Key:  0x05 (KEY_ILLEGAL_REQUEST)
	Sense Code: 0x26
	Sense Qual: 0x02
	CDB Data:   0x2A 0x00 0xFF 0xFF 0xFF 0x6A 0x00 0x00 0x20 0x00 0x00 0x00 
	Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 
	            0x00 0x00 0x00 0x00 0x26 0x02 
	
18:13:21	#21 Text 0 File Writer.cpp, Line 455
	18:13:21.859 LITE-ON  LTR-40125W       : WriteBuffer reduced to 32768 Bytes
	
18:13:21	#22 Text 0 File Writer.cpp, Line 318
	18:13:21.875 - LITE-ON  LTR-40125W       : Queue again later (Intervall : 10msec)
	
18:13:29	#23 Text 0 File Writer.cpp, Line 444
	SCSI-Layer send CDRERR_BUFFER_TO_BIG to writer
	
18:13:29	#24 Text 0 File Writer.cpp, Line 455
	18:13:29.859 LITE-ON  LTR-40125W       : WriteBuffer reduced to 30720 Bytes
	
18:13:37	#25 Text 0 File Writer.cpp, Line 455
	18:13:37.859 LITE-ON  LTR-40125W       : WriteBuffer reduced to 28672 Bytes
	
18:13:45	#26 Text 0 File Writer.cpp, Line 455
	18:13:45.859 LITE-ON  LTR-40125W       : WriteBuffer reduced to 26624 Bytes
	
18:13:53	#27 Text 0 File Writer.cpp, Line 455
	18:13:53.859 LITE-ON  LTR-40125W       : WriteBuffer reduced to 24576 Bytes
	
18:14:01	#28 Text 0 File Writer.cpp, Line 455
	18:14:01.859 LITE-ON  LTR-40125W       : WriteBuffer reduced to 22528 Bytes
	
18:14:09	#29 Text 0 File Writer.cpp, Line 455
	18:14:09.859 LITE-ON  LTR-40125W       : WriteBuffer reduced to 20480 Bytes
	
18:14:17	#30 Text 0 File Writer.cpp, Line 455
	18:14:17.859 LITE-ON  LTR-40125W       : WriteBuffer reduced to 18432 Bytes
	
18:14:25	#31 Text 0 File Writer.cpp, Line 455
	18:14:25.859 LITE-ON  LTR-40125W       : WriteBuffer reduced to 16384 Bytes
	
18:14:33	#32 Text 0 File Writer.cpp, Line 455
	18:14:33.859 LITE-ON  LTR-40125W       : WriteBuffer reduced to 14336 Bytes
	
18:14:41	#33 Text 0 File Writer.cpp, Line 455
	18:14:41.859 LITE-ON  LTR-40125W       : WriteBuffer reduced to 12288 Bytes
	
18:14:49	#34 Text 0 File Writer.cpp, Line 455
	18:14:49.859 LITE-ON  LTR-40125W       : WriteBuffer reduced to 10240 Bytes
	
18:14:57	#35 Text 0 File Writer.cpp, Line 455
	18:14:57.859 LITE-ON  LTR-40125W       : WriteBuffer reduced to 8192 Bytes
	
18:15:05	#36 Text 0 File Writer.cpp, Line 455
	18:15:05.859 LITE-ON  LTR-40125W       : WriteBuffer reduced to 6144 Bytes
	
18:15:13	#37 Text 0 File Writer.cpp, Line 455
	18:15:13.859 LITE-ON  LTR-40125W       : WriteBuffer reduced to 4096 Bytes
	
18:15:21	#38 Text 0 File Writer.cpp, Line 455
	18:15:21.859 LITE-ON  LTR-40125W       : WriteBuffer reduced to 2048 Bytes
	
18:15:29	#39 SCSI -500 File Cdrdrv.cpp, Line 1361
	SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x03220000
	Status:     0x02 (0x03, SCSI_ABORTED)
	HA-Status   0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
	TA-Status   0x00 (0x00, OK)
	Sense Key:  0x05 (KEY_ILLEGAL_REQUEST)
	Sense Code: 0x26
	Sense Qual: 0x02
	CDB Data:   0x2A 0x00 0xFF 0xFF 0xFF 0x6A 0x00 0x00 0x01 0x00 0x00 0x00 
	Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 
	            0x00 0x00 0x00 0x00 0x26 0x02 
	
18:15:29	#40 Text 0 File Writer.cpp, Line 448
	Recorder-Buffer cannot be reduced any more
	
18:15:29	#41 CDR -500 File Writer.cpp, Line 335
	SCSI command aborted
	
18:15:29	#42 Text 0 File ThreadedTransfer.cpp, Line 227
	all writers idle, stopping conversion
	
18:15:29	#43 Text 0 File ThreadedTransfer.cpp, Line 221
	conversion idle, stopping reader
	
18:15:33	#44 Text 0 File dlgbrnst.cpp, Line 1678
	Set remaining time: 0:00,000 (0ms) -> OK
	
18:15:33	#45 Phase 38 File dlgbrnst.cpp, Line 1818
	Burn process failed at 40x (6,000 KB/s)
	

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) 

Hi and welcome to our forum! :slight_smile:

Cause of problem: Nforce chipset/nvidia IDE drivers.

Solution: uninstall Nforce IDE drivers and use only the one included in the operating system.

At least that have been the cause of this problem in 90% of the cases, so I suggest you try this first. Search on Nforce/Nvidia on the forum will probably bring up many similar problems and solutions for you to read through as well :wink:

@OC-Freak

Many thanks for the reply, I appreciate it as I know it was a long post, but I wanted to be as detailed as I could :wink:

I will give it a whirl and let you know how it goes.

Thanks again.

Stephen.

Ok, well. I uninstalled the nforce drivers and tried to get XP to just use default, but it caused me too many problems with my graphics card ATI 9600pro and conflicts etc so I am back on the nforce2 drivers.

Anyone find a work around i.e a decent burning app other than nero? As I stated, clone cd worked fine, but thats no good from burning stuff from the HD etc.

any ideas?

Originally posted by Stephen79
Ok, well. I uninstalled the nforce drivers and tried to get XP to just use default, but it caused me too many problems with my graphics card ATI 9600pro and conflicts etc so I am back on the nforce2 drivers.

Really ? You removed the nforce IDE driver and got problems with your graphics card ? This is hard to believe. Are you shure that you only removed the IDE driver, leaving all other nforce drivers installed ?

@Allan

Afraid so yea. When my computer booted back up, the ATI control manager alterted me that it failed to start. It used default graphic driver, and halted my onboard sound too…and when I had a look in device manager, there were too many unrecognsed/conflict devices. I tried to force some of them to use windows standard, but in the end decided it may be easier to find an alternative to nero than to nforce2.

ok, with the current nforce (which have to be the problem as the drive was fine before installing this board) drivers installed, here is what I have found:

I have 2 drives

NEC 1300A DVD writer - Master
Lite-On 40x - Slave

Programs I have tried:

Clonecd
Nero 5…x & 6 Ultra
Alchol 120%
FastBurn Max
GameJack

The master (DVD drive) will burn with any program I have tried. I have tested the Lite-ON “on the fly” with just clone-cd which worked faster than I have ever know!

Now, the Lite-ON will not record from the HD whether it be an Image, data, audio, vcd etc.

So, its got to be the nforce drivers. I have uninstalled them which gave me too many problems. So, they are back on.

Now, there must be a work around surely???

Anyone had success with this problem?

This archived thread seems to have the answer.

http://club.cdfreaks.com/showthread/t-60043.html

now, if someone could tell me if the drivers in that post are these here???: nForce and nForce2 Drivers v2.03 WHQL Certified

For XP:
http://drivers.softnews.ro/public/download/1/1-259.shtml

For W2K:
http://drivers.softnews.ro/public/download/1/1-260.shtml

an Alternative fix: - I havent tried either yet as I am in work.

XP+nForce2+IDE Burner=System Hang+Failed Burning

If you have a motherboard with the nForce2 chipset, after installing the nforce drivers your burner may fail to burn, but will not fail to read cd/cd-r/cd-rw’s. The problem with this is that while you installed your nforce drivers, it will install a driver for your ide controller, the name is NVIDIA NForce MCP2 IDE Controller.

To fix this you must rollback your driver. To do this, you must do the following:

Go To Control Panel -> System -> Hardware -> Device Manager -> IDE ATA/ATAPI Controllers and right click on NVIDIA NForce MCP2 IDE Controller and select it’s properties and click on the drivers’ tab and click on rollback driver. Reboot your computer and you will now be able to burn.

The NVIDIA NForce MCP2 IDE Controller driver can still be used with no problem. You will just have to update the driver after the reboot. To to this, just simply go to your device manager and go down to IDE ATA/ATAPI Controllers and Select the now rolled back ATA/ATAPI Controller and select the drivers tab, and select to update it. To update it you must either have the driver’s cd in a cd-rom drive, or you must still have the temporary setup files on your hard drive. The directory for this driver is in “C:\NVIDIA
Force\WinXP\2.03\IDE\WinXP” just update it and reboot.

The way that you will know you will have to rollback the driver is if you go to your device manager and under your disk drives, your IDE hard drive is detected as a SCSI drive.

FIXED IT

K, I managed to fix this problem with burning from the slave deveice.

Basically, it was the nforce2 drivers that came with my board. I tried server different versions, but nothing fixed it. What I did to get it working was to roll back manually all the nforce drivers, and uninstall the ide controler from control panel. I then removed all traces of the drivers.

Finally, I installed the drivers that came with my board BUT chose NOT to install the additional SW drivers. Result = all works sweet and I aint going to mess with it :smiley:

Pardon my ignorance; my ASUS A7N8X dx system was built with guidance from a friend who is no longer around. I have learned a fair amount in the ensuing months, but still need help.

The HP 300i DVD burner has worked fine from the day the system was built. I just installed the Lite-on 52327s and have almost the same symptoms as Stephen79.

To test the fix I uninstalled the Nvidia IDE controller. On first reboot [nVidia controller reinstalls itself on second reboot] I was able to copy an audio CD to a CD-RW using Nero Express, but got a power calibration error copying to a CD-R. Still, I would like to fully implement the fix. [Thank goodness for system restore]

My questions are these:

  1. Specifically, which drivers do I roll back?
  2. How do I remove all traces of the drivers?

Thanks!

To rollback your driver, you must do the following:

Go To Control Panel -> System -> Hardware -> Device Manager -> IDE ATA/ATAPI Controllers and right click on NVIDIA NForce MCP2 IDE Controller and select it’s properties and click on the drivers’ tab and click on rollback driver. Reboot your computer and you will now be able to burn.

else, you will need to remove the nforce2 driver, and then reinstall it oppting not to install the “SW driver” add-on.

Sadly, the fix did not work. I have installed the latest Adaptec ASPI layer, have uninstalled nVidia drivers and reinstalled from setup disc, then rolled back the IDE driver to MS. My system must have another issue. Could it be media? I am using TDK 48X 700 mb CD-R. They burn just fine in the HP drive.

The Lite-on will burn CD-RW but not CD-R. The Nero software hangs in the writing phase at 7%, lead in. The drive spins up and down indefinitely. XP will not shut down cleanly; I must use the power switch.

The same result occurs using the Lite-on drive and burning software that came with the HP drive. Oddly, if the Lite-on is used as the source drive and the HP as the destination drive all goes well with either software.

Thanks again!

need to know how to roll back to get rid of the driver.
am using windows Me (dont tell me how sh/* it is pls!)
i have a liteon 40125w drive (not been updated)
and a nvideo riva tnt2 pro

do i go start-settings-control panel-system-:confused:

but then where?
any help appreciated
as im a NEWBIE , pls forgive if offended by my nature!
:frowning:

i can remember having problems after installing directx 8.1
is this why?
how do i uninstall it?
any help welcome

cheers

Originally posted by akyahmed
[B]i can remember having problems after installing directx 8.1
is this why?
how do i uninstall it?
any help welcome

cheers [/B]

put directx 9 on :smiley:

rangertim: Try using some different media and/or selecting a different writing speed.