I just got a MicroAdvantage 16DDVDRW-A13 and already update the firmware version 70. I have try burning using DVD Shrink 3.2 with DVD Decrypter. I have also tried with Nero Version 6, but still can't get to burn. I am using HP dvd+r 8X media. I used DVD Identifier to know that the actual manufacturer ID is CMC Mag EO1. I check MicroAdvantage's website and see that the burner supports this media. I'm at the point of not knowing what else to do.
I got the whole "shrinking" part down, but the actual process of burning just can't do. Below is a portion of the log. Could some one help me understand what I may be doing wrong. Thanks.
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 2/15/2005 8:12:28 PM
ahead WinASPI: File 'C:\Program Files\Ahead
ero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM
Nero version: 6.3.1.17 (Nero Express)
Recorder: < 16X8 DVD DUAL> Version: A070 - HA 0 TA 0 - 6.3.1.17
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HITACHI GD-2000 >Version: 1000 - HA 0 TA 1 - 6.3.1.17
Adapter driver: <atapi> HA 0
=== Scsi-Device-Map ===
CdRomPeripheral : 16X8 DVD DUAL atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HITACHI GD-2000 atapi Port 0 ID 1 DMA: On
DiskPeripheral : WDC WD400BB-00DEA0 atapi Port 1 ID 0 DMA: On
DiskPeripheral : WDC AC38400L atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
16X8 DVD DUAL E: CDRom0
HITACHI GD-2000 F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048052kB)
Free physical memory: 686MB (703112kB)
Memory in use : 32 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
15.2.2005
DVD-Copy on the fly
9:55:25 PM #1 Text 0 File Reader.cpp, Line 118
Reader running
9:55:25 PM #2 Text 0 File Writer.cpp, Line 124
Writer 16X8 DVD DUAL running
9:55:25 PM #3 Text 0 File DVDCopy.cpp, Line 271
DVD Track-Information from source disc
S01 T01 Con 0x04 Start 0 Len 2295104 (gap 0) Blank 0 Res 0 Dmg 0 Mode TRM_DATA_MODE1 (0)
9:55:26 PM #4 Text 0 File DVDCopy.cpp, Line 374
Max -1 tracks of 1 allowed to copy
1: 0 - 2295104 = 2295104, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
9:55:26 PM #5 Text 0 File Burncd.cpp, Line 3172
Turn on Disc-at-once, using DVD media
9:55:26 PM #6 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2295103 (510:01.28, 4482MB)
9:55:26 PM #7 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO (enabled: CD)
9:55:26 PM #8 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: 16X8 DVD DUAL, Media type: DVD+R
9:55:26 PM #9 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================
9:55:26 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 2295104 (2295104) = #2295104/510:1.29
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2295104 blocks [ 16X8 DVD DUAL ]
9:55:26 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [ 16X8 DVD DUAL ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4700372992, ISRC ""
DAO layout:
===========
_Start|___Track|Idx|RecDep|CtrlAdr
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2295104 | lead-out | 1 | 0x00 | 0x41
9:55:27 PM #12 Phase 36 File dlgbrnst.cpp, Line 1845
Burn process started at 8x (11,080 KB/s)
9:55:27 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
9:55:27 PM #14 SCSI -1066 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x034A5000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x24 0x00
9:55:27 PM #15 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 7:12,956 (432956ms) -> OK
9:55:27 PM #16 Text 0 File DVDPlusRW.cpp, Line 613
Start write address at LBA 0
DVD high compatibility mode: Yes
9:56:42 PM #17 SCSI -400 File Cdrdrv.cpp, Line 1442
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x0A170000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x91
Sense Qual: 0xC1
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x91 0xC1
9:56:42 PM #18 CDR -400 File Writer.cpp, Line 304
Unspecified target error
9:56:42 PM #19 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
9:56:42 PM #20 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
9:56:43 PM #21 Phase 127 File dlgbrnst.cpp, Line 1845
Generating DVD high compatibility borders
9:56:43 PM #22 SCSI -1066 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 0, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x05 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x24 0x00
9:56:43 PM #23 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
9:56:43 PM #24 Phase 129 File dlgbrnst.cpp, Line 1845
Generating DVD borders completed successfully
9:56:43 PM #25 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
9:56:43 PM #26 Phase 38 File dlgbrnst.cpp, Line 1845
Burn process failed at 8x (11,080 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 2/15/2005 8:12:28 PM
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 11:59:42 PM (Adapter driver for rec)
