165P6S liteon

hello all i have one 165P6S with this firmware mv9n last …
i want to know if i can to burn this media id :


Unique Disc Identifier : [DVD-R:GSC003]

Disc & Book Type : [DVD-R] - [DVD-R]
Manufacturer Name : [GigaStorage Corp.]
Manufacturer ID : [GSC003]
Blank Disc Capacity : [2,298,496 Sectors = 4.71 GB (4.38 GiB)]

** INFO : Drive = LITE-ON DVDRW SHM-165P6S - [FW MV9N] - [ATAPI]
** INFO : Write Capabilities = DVD+R DVD+R-DL DVD+RW
** INFO : Write Capabilities = DVD-R DVD-R-DL DVD-RW DVD-RAM
** INFO : Disc = [DVD-R:GSC003]
** INFO : Reference Speed : 1x DVD = 1385 kBps
** INFO : An Writeable Disc Is Recommended For Accurate Results
** INFO : Write Speeds (Supported By This Drive On This Disc) Listed Below

** INFO : GET PERFORMANCE Write Speed Descriptor(s)
Descriptor #1 = 11080 kBps ( 8.00x) - [CLV/Non-Pure CAV]
Descriptor #2 = 8310 kBps ( 6.00x) - [CLV/Non-Pure CAV]
Descriptor #3 = 5540 kBps ( 4.00x) - [CLV/Non-Pure CAV]

** INFO : MODE SENSE Write Speed Descriptor(s) [Legacy Command]
** WARNING : MODE SENSE Is Obsolete And Not Always Properly Supported
Descriptor #1 = 11080 kBps ( 8.00x) - [CLV/Non-Pure CAV]
Descriptor #2 = 8310 kBps ( 6.00x) - [CLV/Non-Pure CAV]
Descriptor #3 = 5540 kBps ( 4.00x) - [CLV/Non-Pure CAV]

** INFO : Hex Dump Of ‘Media Code’-Block Listed Below
** INFO : 4-Byte Header Preceding ‘Media Code’-Block Discarded
** INFO : Format 0Eh - Pre-Recorded Information In Lead-In
** WARNING : ‘Media Code’-Block Is Only Partially Retrieved
0000 : 01 40 c1 fd 9e d8 52 00 02 85 0d 10 88 9a 80 00 .@…R…
0010 : 03 47 53 43 30 30 33 00 04 00 00 00 00 00 00 00 .GSC003…
0020 : 05 88 80 00 00 00 02 00 06 09 0d 13 87 78 80 00 …x…
0030 : 07 88 80 00 00 00 00 00 08 05 15 0d 10 0b 0a 00 …
0040 : 09 98 08 0f 0b 78 88 00 0a 80 00 00 00 00 10 00 …x…
0050 : 0b 07 19 15 a7 88 75 00 0c 99 bc aa a2 20 22 00 …u… ".
0060 : 0d 00 00 d0 00 00 00 00 …

** INFO : Hex Dump Of ‘Control Data Zone’-Block Listed Below
** INFO : 4-Byte Header Preceding ‘CDZ’-Block Discarded
** INFO : Format 10h - Physical Format Information Of Control Data Zone
0000 : 25 0f 02 00 00 03 00 00 00 26 12 7f 00 00 00 00 %…&…

[ DVD Identifier V5.0.1 - DVD Identifier - Your DVD, HD DVD & Blu-ray Companion ]

i want to burn this media at 1 or 2 of gear …
this is for burn game of gamecube or playstation 2
thank for all to help me

Hi and Welcome!

since DVD identifier reports several speeds for that MID, this MID is known to the firmware of your drive. So there is no reason why not to try these discs.

Also, you might consider flashing the drive to non-beta MS0R (or MS0P) firmware.

Michael

The MV9N is a test firmware I believe, and better results are more likely with either MSOP or MSOR. I get best SL results with MSOP, but I’ve seen better DL results posted by MSOR users. BTW I had worst results of these 3 with the MV9N.

hello i reflash with this firmware 165P6S.MS0P.patched-rs.exe and when i open the the id media gsc003 appear in the list for that i don t have no problem …
i just want to burn at speed 1 or 2 with this burner …
its for playsatation gamecube or xbox disc …
if i burn more slowly make my player of this console better …
that that i need to burn at this speed
thank to all to find that thing …

[QUOTE=celica;1916538]
i just want to burn at speed 1 or 2 with this burner …[/quote]Forget it.

its for playsatation gamecube or xbox disc …
if i burn more slowly make my player of this console better …
No. If the disc does not work if burned at supported speeds (try 4x and 8x), then it is the disc that has to be blamed.

Michael

[QUOTE=mciahel;1916544]Forget it.
No. If the disc does not work if burned at supported speeds (try 4x and 8x), then it is the disc that has to be blamed.

Michael[/QUOTE]

I agree. Try decent media (Verbatim, Taiyo Yuden) at the rated speed, or if you have to lower it, 4x.

it doesn t matter the speed of burn the dvd s game console ?
i think it not possible to burn at this speed with this burner …
the brand i use for playstation is cursor dvd-r
may be i need to change the media for the game cube , wii game …
i little confuse with all this stuff firware and other …
my burner was one SHW-160P6S crossflashing in 165P6S with all stuff eeprom utility …
why i cant to burn at this speed 2 …,
thank to tell me why

Hi,[QUOTE=celica;1916602]it doesn t matter the speed of burn the dvd s game console ?[/quote]It’s the media that matters more. Of course, the burn speed will also contribute to the quality of the disc, but trying to burn a 8x rated disc @1x or 2x is more likely to be worse than at 4x or 8x.

i think it not possible to burn at this speed with this burner …
No recent burner will do 8x discs slower than 4x.

the brand i use for playstation is cursor dvd-r
may be i need to change the media for the game cube , wii game …
Never heard of that brand. You should try Verbatim or Taiyo Yuden discs. Known good media.

why i cant to burn at this speed 2 …,
thank to tell me why
Feature of all modern drives since higher speed rated (from 8x) media are not designed for being written extremely slow.

Michael