1650 spitting out coasters!

vbimport

#1

Please help…just bought this drive today and my only successful burn was the first one. Since then it’s been spitting out coasters :frowning:

Here is my Nero log file; thanks in advance!

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 8/15/2002 7:03:36 AM 
ahead WinASPI: File 'D:\Program Files\Ahead
ero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM 
Nero Version: 6.6.0.13
Internal Version: 6, 6, 0, 13c
(Nero Express)
Recorder: <BENQ DW1650 DD DVD>Version: BCFC - HA 1 TA 0 - 6.6.0.13
Adapter driver: <IDECHNDR>HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI 
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder


CD-ROM: 

Version: 2.0B - HA 2 TA 0 - 6.6.0.13</P>Adapter driver: <VAXSCSI>HA 2
 
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD400BB-00AUA1 IdeChnDr Port 0 ID 0 DMA: On 
DiskPeripheral : ST380011A IdeChnDr Port 0 ID 1 DMA: Off
CdRomPeripheral : BENQ DVD DD DW1650 IdeChnDr Port 1 ID 0 DMA: On 
CdRomPeripheral : PLEXTOR CD-R PX-W1210A IdeChnDr Port 1 ID 1 DMA: Off
CdRomPeripheral : PW2315O CCL129X 2.0B vaxscsi Port 2 ID 0 DMA: Off
 
=== CDRom-Device-Map ===
BENQ DVD DD DW1650 F: CDRom4
PLEXTOR CD-R PX-W1210A H: CDRom1
PW2315O CCL129X I: CDRom2
=======================
 
AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523740kB)
Free physical memory: 121MB (124000kB)
Memory in use : 76 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 
 
4.4.2006
Burn DVD Image
11:37:34 PM	#1 Text 0 File Reader.cpp, Line 127
	Reader running
 
11:37:34 PM	#2 Text 0 File Writer.cpp, Line 122
	Writer BENQ DVD DD DW1650 running
 
11:37:34 PM	#3 Text 0 File Burncd.cpp, Line 3167
	Turn on Disc-At-Once, using DVD media
 
11:37:34 PM	#4 Text 0 File DlgWaitCD.cpp, Line 260
	Last possible write address on media: 2298495 (510:46.45, 4489MB)
	Last address to be written: 871125 (193:35.00, 1701MB)
 
11:37:34 PM	#5 Text 0 File DlgWaitCD.cpp, Line 272
	Write in overburning mode: NO (enabled: CD)
 
11:37:34 PM	#6 Text 0 File DlgWaitCD.cpp, Line 2339
	Recorder: BENQ DVD DD DW1650, Media type: DVD-R
	 Disc Manufacturer: TYG02 - 
	 Disc Application Code: 64, Disc Physical Code: 193
 
11:37:34 PM	#7 Text 0 File DlgWaitCD.cpp, Line 438
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
 
11:37:34 PM	#8 Text 0 File ThreadedTransferInterface.cpp, Line 830
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
	 2 indices, index0 (150) not provided
	 original disc pos #0 + 871126 (871126) = #871126/193:35.1
	 not relocatable, disc pos for caching/writing not required/not required, no patch infos
	 -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 871126 blocks [BENQ DVD DD DW1650]
	--------------------------------------------------------------
 
11:37:34 PM	#9 Text 0 File ThreadedTransferInterface.cpp, Line 1043
	Prepare recorder [BENQ DVD DD DW1650] for write in CUE-sheet-DAO
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x00; Session Closed, disc fixated
	 Tracks 1 to 1:
	 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1784066048, ISRC ""
	DAO layout:
	===========
	 __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
	 0 | lead-in | 0 | 0x41 | 0x00
	 0 | 1 | 0 | 0x41 | 0x00
	 0 | 1 | 1 | 0x41 | 0x00
	 871126 | lead-out | 1 | 0x41 | 0x00
 
11:37:35 PM	#10 Phase 24 File dlgbrnst.cpp, Line 1832
	Caching of files started
 
11:37:35 PM	#11 Text 0 File Burncd.cpp, Line 4051
	Cache writing successful.
 
11:37:35 PM	#12 Phase 25 File dlgbrnst.cpp, Line 1832
	Caching of files completed
 
11:37:35 PM	#13 Phase 36 File dlgbrnst.cpp, Line 1832
	Burn process started at 4x (5,540 KB/s)
 
11:37:35 PM	#14 Text 0 File ThreadedTransferInterface.cpp, Line 2609
	Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
 
11:37:35 PM	#15 Text 0 File DVDR.cpp, Line 2267
	Recording mode: Sequential Recording Mode
 
11:37:35 PM	#16 Text 0 File Mmc.cpp, Line 21469
	Set BUFE: Seamless Link -> ON 
 
11:37:35 PM	#17 Text 0 File DVDR.cpp, Line 2421
	Start write address at LBA 0
	DVD high compatibility mode: Yes
 
11:37:35 PM	#18 Text 0 File Cdrdrv.cpp, Line 8438
	---- DVD Structure: Physical Format Information (00h) ----
	Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
	 Book Type: DVD-R (2), Part Version: 5
	 Disc Size: 120 mm, Maximum Rate: <NOT specified>(F h)
	 Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
	 Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
	 Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
	 End Physical Sector Number of Data Area: 0 h
	 End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
	 Data in Burst Cutting Area (BCA) does not exist
	 Start sector number of the current Border-Out: 0 h
	 Start sector number of the next Border-In: 0 h
	 Media Specific [16..63]:
	 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
	 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
	 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
 
11:38:04 PM	#19 SCSI -1135 File Cdrdrv.cpp, Line 1436
	SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x06C70000
	Status: 0x04 (0x01, SCSI_ERR)
	HA-Status 0x00 (0x00, OK)
	TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
	Sense Key: 0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x0C
	Sense Qual: 0x00
	CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 
	Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x12 
	 0x00 0x00 0x00 0x00 0x0C 0x00 
 
11:38:04 PM	#20 CDR -1135 File Writer.cpp, Line 311
	Write error
 
11:38:04 PM	#21 Text 0 File ThreadedTransfer.cpp, Line 228
	all writers idle, stopping conversion
 
11:38:04 PM	#22 Text 0 File ThreadedTransfer.cpp, Line 222
	conversion idle, stopping reader
 
11:38:04 PM	#23 Text 0 File DVDR.cpp, Line 2658
	EndDAO: Last written address was -1
 
11:38:04 PM	#24 Phase 38 File dlgbrnst.cpp, Line 1832
	Burn process failed at 4x (5,540 KB/s)
 
 
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 8/15/2002 7:03:36 AM 
File 'Drivers\PXHELP20.SYS': Ver=2.03.30a, size=20640 bytes, created 3/29/2005 2:03:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\IdeChnDr.sys': Ver=?.?.?.?, size=79114 bytes, created 9/11/2001 12:00:00 AM (Adapter driver for rec)
File 'Drivers\vaxscsi.sys': Ver=?.?.?.?, size=223128 bytes, created 4/3/2006 7:47:06 PM (Adapter driver for src)
 
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

#2

Why write an 8x disc @ 4x ?


#3

Your version of Nero is old and you should update it. The latest version 6 is 6.6.1.4


#4

Reinstall or repair nero.

Try burning at 8x or 12x with overspeeding on.


#5

The Plextor drive and one hard drive don’t run withj DMA on.
Try disconnecting the Plex drive and set DMA on to the hard drive.


#6

Disc Manufacturer: TYG02 -

It it a genuine Taiyo Yuden. http://club.cdfreaks.com/showthread.php?t=112854


#7

I’m really glad too see a good teamwork. All comments from our knowledgeable members are all spot on! I will summarize and add more info. :slight_smile:

Recorder: <BENQ DW1650 DD DVD>Version: BCFC - HA 1 TA 0 - 6.6.0.13
Nice, does this BCFC firmware originally came with your drive? :wink:

DiskPeripheral : WDC WD400BB-00AUA1 IdeChnDr Port 0 ID 0 DMA: On
DiskPeripheral : ST380011A IdeChnDr Port 0 ID 1 DMA: Off
CdRomPeripheral : BENQ DVD DD DW1650 IdeChnDr Port 1 ID 0 DMA: On
CdRomPeripheral : PLEXTOR CD-R PX-W1210A IdeChnDr Port 1 ID 1 DMA: Off
CdRomPeripheral : PW2315O CCL129X 2.0B vaxscsi Port 2 ID 0 DMA: Off
Try to turn DMA On if applicable. See here: Troubleshooting: Enabling/Checking DMA in Windows XP, 2000, Me, 9x

Nero Version: 6.6.0.13
Update to the latest: 6.6.1.4. Click here: http://ww2.nero.com/nero6/enu/nero-up.php

Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Media (medium) problem. Check if your TYG02 is real or fake. A real TYG02 has a serial “GG00xxxx” and a four digit batch number on the hub ring. See attachment.


#8

Uninstall [B]I[/B]ntel [B]A[/B]pplication [B]A[/B]ccelerator from your box and forget it ever existed. Restart and use standard M$ IDE channel drivers.
IAA might once been good but it’s just crap when it comes to optical drives.


#9

Hi Zevia, thanks for the input.

However I’m not sure what you’re getting on about the BCFC firmware…are you saying it’s really good or are you just being sarcastic? :stuck_out_tongue:

Also thanks to all who replied, I did a fresh install of XP and everything seems to be working nicely now. fingers crossed :iagree:


#10

Sorry about that. When you first posted (1 week ago according to cdfreaks time) the firmware BCFC is not out yet. BCFC was out 4 days ago. So did you get the drive with BCFC installed or you flashed the drive with BCFC? That was the question. :slight_smile:


#11

Oh I see… :smiley:

I got the drive with BCFC already installed.

Thanks again for your help. :clap: