1620 - Burn process failed

vbimport

#1

Here is the nero log

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Programme\Ahead
ero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26.10.2004 16:21:30 
Nero Version: 6.6.0.6 (Nero Express)
Rekorder:             <BENQ DVD DD DW1620>      Version: B7T9 - HA 1 TA 0 - 6.6.0.6
 Adapter-Treiber:     <atapi>                   HA 1
 Drive buffer  :      2048kB
 Bus Type      :      default (0) -> ATAPI, detected: ATAPI 
CD-ROM:               <AXV      CD/DVD-ROM      >Version: 2.2a - HA 2 TA 0 - 6.6.0.6
 Adapter-Treiber:     <a347scsi>                HA 2

=== Scsi-Device-Map ===
DiskPeripheral       : ST310220A                        atapi Port 0 ID 0  DMA: On 
DiskPeripheral       : Maxtor 32049H3                   atapi Port 0 ID 1  DMA: On 
CdRomPeripheral      : BENQ DVD DD DW1620               atapi Port 1 ID 0  DMA: On 
DiskPeripheral       : IBM-DTLA-307030                  atapi Port 1 ID 1  DMA: On 
CdRomPeripheral      : AXV     CD/DVD-ROM      2.2a  a347scsi Port 2 ID 0  DMA: Off
CdRomPeripheral      : Generic STEALTH DVD            st3mp28 Port 3 ID 0  DMA: Off

=== CDRom-Device-Map ===
BENQ DVD DD DW1620         D:   CDRom4
AXV CD/DVD-ROM             J:   CDRom1
Generic STEALTH DVD        E:   CDRom2
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE           : 0
Physical memory     : 255MB (261616kB)
Free physical memory: 27MB (28012kB)
Memory in use       : 89 %
Uncached PFiles: 0x0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

11.2.2005
ISO Zusammenstellung
22:49:29	#1 Text 0 File Isodoc.cpp, Line 6168
	Iso document burn settings
	------------------------------------------
	Determine maximum speed : FALSE
	Simulate                : FALSE
	Write                   : TRUE
	Finalize CD             : TRUE
	Multisession            : FALSE
	Burning mode            : DAO
	Mode                    : 1
	ISO Level               : 1 (Max. of 11 = 8 + 3 char)
	Character set           : ISO 9660
	Joliet                  : TRUE
	Allow pathdepth more than 8 directories : TRUE
	Allow more than 255 characters in path  : TRUE
	Write ISO9660 ;1 file extensions        : TRUE
	
22:49:30	#2 Text 0 File Reader.cpp, Line 127
	Reader running
	
22:49:30	#3 Text 0 File Writer.cpp, Line 122
	Writer BENQ     DVD DD DW1620    running
	
22:49:30	#4 ISO9660GEN -11 File geniso.cpp, Line 3286
	First writeable address = 0 (0x00000000)
	
22:49:30	#5 Text 0 File Burncd.cpp, Line 3155
	Turn on Disc-at-Once, using DVD media
	
22:49:31	#6 Text 0 File DlgWaitCD.cpp, Line 257
	Last possible write address on media:  2298495 (510:46.45, 4489MB)
	Last address to be written:            2119279 (470:57.04, 4139MB)
	
22:49:31	#7 Text 0 File DlgWaitCD.cpp, Line 269
	Write in overburning mode: NO (enabled: CD)
	
22:49:31	#8 Text 0 File DlgWaitCD.cpp, Line 2311
	Recorder: BENQ DVD DD DW1620, Media type: DVD-R
	 Disc Manufacturer: TTG01 - 
	 Disc Application Code: 64, Disc Physical Code: 193
	
22:49:31	#9 Text 0 File DlgWaitCD.cpp, Line 431
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	
22:49:31	#10 Text 0 File ThreadedTransferInterface.cpp, Line 829
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 ()
	    2 indices, index0 (150) not provided
	    original disc pos #0 + 2119280 (2119280) = #2119280/470:57.5
	    relocatable, disc pos for caching/writing not required/ required, no patch infos
	    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2119280 blocks [BENQ     DVD DD DW1620]
	--------------------------------------------------------------
	
22:49:31	#11 Text 0 File ThreadedTransferInterface.cpp, Line 1042
	Prepare recorder [BENQ     DVD DD DW1620] for write in CUE-sheet-DAO
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x00; Session Closed, disc fixated
	 Tracks 1 to 1:
	   1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    4340285440, ISRC ""
	DAO layout:
	===========
	 __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
	       0 |  lead-in |   0 |    0x41 | 0x00
	       0 |        1 |   0 |    0x41 | 0x00
	       0 |        1 |   1 |    0x41 | 0x00
	 2119280 | lead-out |   1 |    0x41 | 0x00
	
22:49:32	#12 Phase 24 File dlgbrnst.cpp, Line 1832
	Cachen von Dateien
	
22:49:32	#13 Text 0 File Burncd.cpp, Line 4042
	Cache writing successful.
	
22:49:32	#14 Phase 25 File dlgbrnst.cpp, Line 1832
	Cachen von Dateien fertig
	
22:49:32	#15 Phase 36 File dlgbrnst.cpp, Line 1832
	Start des Brennvorganges mit 4x (5.540 KB/s)
	
22:49:32	#16 Text 0 File ThreadedTransferInterface.cpp, Line 2604
	Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
	
22:49:32	#17 Text 0 File DVDR.cpp, Line 2300
	Recording mode: Sequential Recording Mode
	
22:49:32	#18 Text 0 File Mmc.cpp, Line 21079
	Set BUFE: Seamless Link -> ON 
	
22:49:32	#19 Text 0 File DVDR.cpp, Line 2441
	Start write address at LBA 0
	DVD high compatibility mode: Yes
	
22:49:32	#20 Text 0 File Cdrdrv.cpp, Line 8332
	---- DVD Structure: Physical Format Information (00h) ----
	Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
	 Book Type: DVD-R   (2), Part Version: 5
	 Disc Size: 120 mm,      Maximum Rate: <not specified> (F h)
	 Number of Layers: 1,    Track Path: Parallel Track Path (PTP),  Layer Type: recordable
	 Linear Density:         0,267 um/bit,  Track Density:  0,74 um/track
	 Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
	 End Physical Sector Number of Data Area:      0 h
	 End Sector Number in Layer 0:                 0 h
	 Data in Burst Cutting Area (BCA) does not exist
	  Start sector number of the current Border-Out: 0 h
	  Start sector number of the next Border-In:     0 h
	 Media Specific [16..63]:
	      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	
22:49:32	#21 CDR -1207 File DVDR.cpp, Line 4805
	Book Type automatisch auf 'Aktuelle Rekordereinstellung' gesetzt
	
23:05:18	#22 SCSI -1135 File Cdrdrv.cpp, Line 1432
	SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04F00000
	Status:     0x04 (0x01, SCSI_ERR)
	HA-Status   0x00 (0x00, OK)
	TA-Status   0x02 (0x01, SCSI_TASTATUS_CHKCOND)
	Sense Key:  0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x0C
	Sense Qual: 0x00
	CDB Data:   0x2A 0x00 0x00 0x1D 0xE5 0xA0 0x00 0x00 0x20 0x00 0x00 0x00 
	Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x12 
	            0x00 0x00 0x00 0x00 0x0C 0x00 
	
23:05:18	#23 CDR -1135 File Writer.cpp, Line 311
	Fehler beim Schreiben
	
23:05:18	#24 Text 0 File ThreadedTransfer.cpp, Line 228
	all writers idle, stopping conversion
	
23:05:19	#25 Text 0 File ThreadedTransfer.cpp, Line 222
	conversion idle, stopping reader
	
23:05:19	#26 Text 0 File DVDR.cpp, Line 2682
	EndDAO: Last written address was 1959327
	
23:05:19	#27 Text 0 File DVDR.cpp, Line 5619
	Drive: BENQ     DVD DD DW1620   
	Book Type request [gen]: DVD-ROMDrive doesn't support changing Book Type for DVD-R
	
23:05:19	#28 Phase 38 File dlgbrnst.cpp, Line 1832
	Brennvorgang nicht erfolgreich mit 4x (5.540 KB/s)
	

Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 28.10.2003 11:02:00 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=?.?.?.?, size=86912 bytes, created 29.08.2002 00:27:50 (Adapter driver for rec)
File 'Drivers\a347scsi.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 30.04.2004 08:33:00 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) 


This has occured after firmware update. :sad:
Any suggestions?


#2

Which firmware did you flashed?
Flash again with the B7T9 firmware.


#3

Please have a look at the log file.

Rekorder:                   Version: B7T9 - HA 1 TA 0 - 6.6.0.6

especially at these parts

Sense Key:  0x03 (KEY_MEDIUM_ERROR)
Memory in use       : 89 %
#23 CDR -1135 File Writer.cpp, Line 311
	Fehler beim Schreiben(Write Error)
#27 Text 0 File DVDR.cpp, Line 5619
	Drive: BENQ     DVD DD DW1620   
	Book Type request [gen]: DVD-ROMDrive doesn't support changing Book Type for DVD-R

#4

Book Type request [gen]: DVD-ROMDrive doesn’t support changing Book Type for DVD-R

In Nero Burning Rom under Recorder > Choose Recorder click on Options and then Booktype Settings set for Current Recorder Setting. You have it set for DVD-ROM and you can’t change a -R disk to DVD-ROM. Hope that helps.


#5

@rolling56
Thanks, it worked. :bow: