1-Click DVD Copy Pro freezes (Memorex 20x MRX-530L v1 External)

vbimport

#1

[qanda]This thread is about the Memorex 20x MRX-530L v1 External. Click here to see full specs[/qanda]Ok, I recently bought an external(usb) Memorex DVD -RAM 530L v1 dvd burner. The first movie I tried to burn was Eagle Eye. I put it in and used DVDFab Decrypter to remove the copyrights and DVD Shrink to make it fit on a disc. That all worked perfectly. I saved the shrunken file to a folder in My Documents. I then tried burning it using 1-Click DVD Copy Pro and everything worked great. So today I did the same thing with the movie Gladiator but as soon as I went into 1-Click DVD Copy Pro and pressed start, it says Caching Files… and everything freezes up and I have to terminate the process. I have tried using numerous softwares to burn this movie to a DVD-R disc(including DVD Santa, IMG Burn, and Nero Burning Rom.) and all the softwares freeze up at some point in the burn and I have to terminate the processes. It can’t be the movie because it does the same thing with I am Legend! Is there something I have to do to the computer or burner to stop it from freezing. I am starting to get very frustrated! Any help or tips are appreciated. Thanks!


#2

[QUOTE=giggitygoo4410;2189678][qanda]This thread is about the Memorex 20x MRX-530L v1 External. Click here to see full specs[/qanda]Ok, I recently bought an external(usb) Memorex DVD±RAM 530L v1 dvd burner. The first movie I tried to burn was Eagle Eye. I put it in and used DVDFab Decrypter to remove the copyrights and DVD Shrink to make it fit on a disc. That all worked perfectly. I saved the shrunken file to a folder in My Documents. I then tried burning it using 1-Click DVD Copy Pro and everything worked great. So today I did the same thing with the movie Gladiator but as soon as I went into 1-Click DVD Copy Pro and pressed start, it says Caching Files… and everything freezes up and I have to terminate the process. I have tried using numerous softwares to burn this movie to a DVD-R disc(including DVD Santa, IMG Burn, and Nero Burning Rom.) and all the softwares freeze up at some point in the burn and I have to terminate the processes. It can’t be the movie because it does the same thing with I am Legend! Is there something I have to do to the computer or burner to stop it from freezing. I am starting to get very frustrated! Any help or tips are appreciated. Thanks![/QUOTE]

I can understand using DVDFab Decrypter … maybe , I guess
… but why aren’t you just using DVD43 ?
Also on the same note …
Why are you using DVDShrink to compress ?
If you have 1ClickPRO … you don’t need to use DVDShrink … necessarily
You are really taking the long way around

  • and way over-complicating the Issue(s)
    :confused:

Please Post a >> F8 log session of the attempt(s) …
Let us read the ‘process’ and ‘error’ in context

  • and your options - selected

Open 1Click > Press your F8 key
>> Copy and Paste the Log Report to your Reply post

Look for :
Session Started” / “Session Closed

  • to divide the individual sessions

Post one “Complete” Session per Reply Post
One or Two “Session(s)” in question should suffice

If the One Session is too long - Divide the Session into Two Postings

Your log will instantly answer 20 questions we might have

Let us take a look …





Here's the Usual .....troubleshoots ...

Let's check something .....

Go to > Start > My Computer 
> Right Click on DVD drive > Properties > Auto-Play tab 

What do you have selected for the "Action to Perform" for [B]'DVD Movie[/B]" ?
This should be set as "[B]Take no action[/B]"
OR 
Set only for your DVD Player ( WinDVD/Power DVD ) 
- [B]be sure to close your 'Player' before opening 1Click [/B]

What do you have selected for the "Action to Perform" for [B]'Blank CD"[/B] ?
This should be set as "[B]Take no action[/B]"



Go to
> Start > My Computer
> Right Click on DVD drive > Properties
Do you have a “DLA” tab ?
= [B]Disable[/B] DLA


Would you happen to have

  • Nero ( [B]InCD[/B] )
    or
    Roxio ( [B]DragtoDisc[/B]/ EasyArchive/ DirectCD )
  • installed/active on your Computer ?

[B]FAQ[/B] : Can other software conflict with the installation
and operation of 1Click DVD Copy?

[B] Let’s look at your Filters [/B]
> Download IMGBurn. It’s a free program:
http://www.imgburn.com/index.php?act=download
(it’s also an excellent burning program )

> Run IMGBurn > Go to Tools > Filter Driver Load Order

> Click “Clipboard”. Close IMGBurn
Then paste the information you copied into your clipboard
into your next post in this thread (ctrl-v).

Visit http://www.cdr-zone.com/forum/about4719.html,
and read the first post please,
so you can get a better understanding of what is going on.

[B]Please , Do not start randomly deleting filters.[/B]





Here's some Help - with maybe ... reducing your Computer's  load .... 

I'd recommend that you [Try using EnditALL while Copying/Burning](http://forum.lgsoftwareinnovations.com/showthread.php?t=15256)
... to free up your resources 
... You might be surprised at what's running - in the background 


Open [Advanced SystemCare Free](http://www.iobit.com/AdvancedWindowsCarePersonal/index.html)> Utilities  > Admin Tools > Start-Up Manager 
( it's completely free and a very recommended clean-up program ) 


You will be presented with a listing of the Programs 
 - Programs that  are designated to Start-Up with Windows 
- and Descriptions of Each ( Click on Selection ) 

Any  Start Up Entry - Referring to any DVD/CD Software ? 
Windows Media Player ? 
ITunes ? 

If So = UN Check  it 

This only Disables  the Program - from the List 
- Designated to 'Start-Up' - with Windows 
You would - still - be able to 'manually' start the Program(s) - when needed 

Also ...... 
UN Check  anything - Not Trustworthy 
UN Check  anything - Not Necessary or Not Preferred 
( you may  click on an Start-Up item > Select Disable - If you prefer ) 
>> Apply 
> Reboot 


or  -
You could  also , Go into Msconfig - and Deselect unneeded Programs 
- from your 'Start Up"
This will help a lot .....
[Do I really need this on my PC?](http://forum.lgsoftwareinnovations.com/showthread.php?t=14325)

[How to use MSCONFIG ?](http://www.netsquirrel.com/msconfig/)





:)