dvr-108: No supported dvd-recorders were detected on your system

Jman15 · 11-09-2004

No supported dvd-recorders were detected on your system

--------------------------------------------------------------------------------

Can anything work for me today.
I have a pioneer dvr-108 "dvd/cd writer" it burns dvd's at 16x and below speeds
I just got it installed, i had a bad cable. I switched cables and now when i use roxio to burn it, it says no supported dvd recorders were fond on your system.
The cd burner in it works, the dvd rom works, cd rom works but the dvd burner won't work. I double clicked the dvd drive and it says no disc is in.

I have tried dvd-r's and dvd+r's, neither work. I have gone to the website but whenever i try to send them my problem it gives me some lame error msg so i cannot even ask them a question. All my firmware is up to date and i cannot find any driver downloads at the website either. For some reason the burner came with NO cd's to giv eme installation software for the dvd burner. I would have assumed i would have been given a cd with drivers and/or some other kind of software. Is this the problem or is ti something else?

ALSO: i have roxio 5 so i dont know if that is a problem but roxio 5 allows me to make dvd data discs and this is what gives me the no detection error.

*DVD_ADDICT* · 11-09-2004

you shouldn't need any drivers for the 108 dvd burner. need more information from you like what operating system are you using. i would suggest you try using a 80 pin ide cable, make sure you have the jumper set correctly on the 108, try uninstalling ROXIO (sucky software in my opinion) then reinstalling it. NERO BURN has a free trial download that you can tryout.

Jman15 · 11-09-2004

no clue what a jumper is. I am using windows xp. And i do not own roxio cd, it came with mycomputer.

*DVD_ADDICT* · 11-09-2004

Quote:

no clue what a jumper is. I am using windows xp. And i do not own roxio cd, it came with mycomputer.

In the back of the 108 drive there is a jumper setting. Here is a picture to show you what a jumper switch looks like. you remove that little jumper switch and set it on either SECONDARY MASTER or SECONDARY SLAVE depending on how you want the drive set up in your computer. Look in your 108 manual it will show which one is MASTER, SLAVE or CABLE SELECT.

Attached Images

2pioneer 108 jumper.png (36.0 KB, 78 views)

**Hemispasm** · 12-09-2004

Your problem most probably lies with Roxio, meaning it is a older version and the Pioneer is not added in the list of known drives. You will have to update Roxio to the latest version (if there is one in the 5 series) or upgrade to Roxio 6 series or use another piece of software.

__________________
[Airhead]: How the devil?! I got 69! I am a french lesbian!

*Hemi HATES wallpapers AND pickles* ........ never forget that

*There is one thing more evil than pickles, and that is STATISTICS...*

mattfigaro · 12-09-2004

Here is the latest update for easy cd 5 platinum ( requires log in). Release date 8th Sept 04
And here is the latest basic version 5.
Hope that helps

**Hemispasm** · 12-09-2004

Thanx for the input mattfigaro - help is always appreciated

__________________
[Airhead]: How the devil?! I got 69! I am a french lesbian!

*Hemi HATES wallpapers AND pickles* ........ never forget that

*There is one thing more evil than pickles, and that is STATISTICS...*

mattfigaro · 12-09-2004

I don't know if the 108 is supported specifically, but it is worth a try.
Personally I have never used Roxio.
I use nero6 for data discs, and clone dvd to write dvd video files
Anyway, the following is cut and pasted from the roxio site:-

Drive Update for Easy CD Creator Platinum 5.3.5.10u September 8 , 2004

This Web update will add drive support for CD/DVD burners that were released after the release of Easy CD Creator 5.3.5.

Note: You should update to Easy CD Creator Platinum 5.3.5 (if your version is a release prior to 5.3.5) before installing this updater.
You can check for your installed version by opening either Music CD Project or Data CD Project and going to "Help" and then to "About Easy CD Creator".

dvr-108: No supported dvd-recorders were detected on your system

Similar Threads

Search this Thread

People who found this also searched for