Settings Utility for LiteOn DVD Writers (v1.2.1)

**C0deKing** · 26-03-2008

Settings Utility for LiteOn DVD Writers
The Official Thread

What is it
The Settings Utility is much like the Smartburn settings tab but with a few extra nice features aimed at reducing the number of mouse clicks.

Firstly, the first tab displayed is the Options tab, so this saves one click:

Secondly, all options can be enabled with one click, so this saves two clicks:

And the last drive selected is restored the next time you run the Settings Utility, so this can save several clicks as well.

Clear OPC History displays a warning to avoid accidentally clearing the OPC history. This function does the same thing as the Smartburn Clear OPC History.

You can now also set the book type for DVD+R, DVD+RW and DVD+R DL:

The book type can be set as the default or as a temporary setting, for each media type. If the setting is not permanent then a star (*) is shown after the book type. This should help to avoid a lot of confusion:

The "New setting" automatically changes to the alternate setting when the setting is applied, so you can toggle the setting by repeatedly clicking the set button. If you forget to set the book type as the default, just select the same setting again from the dropdown list, enable the "Set as default" option and click "Set".

Region setting is now very simple. Just click the option you want to set or clear all settings to the default. RPC1 is region free and seven region codes can be set, after selecting the option from the dropdown list. No longer do you have to worry about vender/user codes. Please note, BD drives cannot be set to RPC1 (region free) yet.

The Setting Utility can be left running in the background and will not affect any access to the drive. After a flash just select the drive from the dropdown list again to refresh the display.

Note:
1/ To avoid confusion, the "Smart Burn" option is now enabled when checked. All options checked is now all options enabled.
2/ For information about what the settings on the Options tab do, see this excellent addition to the FAQ by H3rB3i: http://club.cdfreaks.com/f44/f-q-lit...a-109986/#HTOS
3/ BD drives cannot be set to RPC1, however they can still have near unlimited region code changes.

Credits
Special thanks goes to CDFreaks and RPC1 (The Firmware Page) and the authors of Dvdzone and PLScsi, xvi, Pat LaVarre and r-man. Without them, this utility would not have been possible.

Version: v1.2.1 (14 September 2009)
* Added Region Setting

Version: v1.1.0 (29 March 2008)
* Renamed the settings tab to the Options tab
* Added bitsettings

Version: v1.0.0 (26 March 2008)
* First release

Download: Settings Utility
Mirror: Settings Utility

__________________
http://codeguys.rpc1.org/
LiteOn Tools: EEPROM Utility <-- New v6.2.0, Flash Utility <-- New v6.0.1, Settings Utility <-- New v1.2.1
Samsung Tools: Patch Utility <-- New v3.4.10
LiteOn Patches: Fast Read (FR) | Fast Burn (FB) | Enhanced OverSpeed (EOS) | Enhanced Online HyperTuning (EOHT)
BenQ Patches: Fast Burn (FB) | Enhanced SolidBurn (ESB)
Samsung Patches: Fast Read (FR) | Remove RipLock (RLR) | Fast Burn (FB) | Retain book type (BS) | Default DVD-ROM (ROMD)

The man who does things makes mistakes, but he who doesn't makes the biggest mistake of all - doing nothing. Benjamin Franklin

The Forum Rules

Click HERE to join cdfreaks.com

Last edited by C0deKing; 14-09-2009 at 07:27. Reason: v1.2.1

Skylon · 26-03-2008

Thanks C0deKing!

Sweet! This would be an alternative to SmartBurn Utility.

__________________
CPU: Intel E2160 M0 @ 3.0GHz (333x9) @ 1.375v @ Stock HSF GPU: Gigabyte GeForce 8600GT @ 700/1600
RAM: 2 x 1GB Kingston DDR2-667 @ 800 2.0v 4-4-4-12 MB: Gigabyte GA-P35-DS3 PSU: Cooler Master Extreme 650W
HDD: 1 x Maxtor 40GB (IDE) + 1 x WD 320 GB (IDE) @ IT8212F IDE RAID Controller Card (ATAPI BIOS)

Optical:
Sony DRU-810A @ DW1640 BSLB +Speed RPC1
BenQ DW1800 @ LH-20A1P KL0P FBL EOS EOHT6 RPC1 DIY
Pioneer DVR-112BK @ DVR-112L 8.25 +Speed RPC1

Gone:
Samsung SH-S182D @ TS-H652D KC03 RPC1

*jcusimano2* · 26-03-2008

I like this tool better than smartburn

what about destroy disk??

*mognegna* · 26-03-2008

Great CK!

Do you think to add, in the future, a visualization of MIDs learned?

__________________
Lite-On iHAS322 3L11
Lite-On DH-20A3H YV6D (HT743)
Lite-On SHM-165P6S MS0R
Pioneer DVR-112D@DVR-112L 1.28
Plextor PX-755A 1.07
Plextor PX-716A 1.11
BenQ DW1650 BCIC

Skylon · 26-03-2008

Quote:

Originally Posted by jcusimano2

I like this tool better than smartburn

what about destroy disk??

Currently no drives supported this feature, so it's useless to implement it (as of time of writing this). Someday when we can use this feature, then CK would probably add it to this tool.

__________________
CPU: Intel E2160 M0 @ 3.0GHz (333x9) @ 1.375v @ Stock HSF GPU: Gigabyte GeForce 8600GT @ 700/1600
RAM: 2 x 1GB Kingston DDR2-667 @ 800 2.0v 4-4-4-12 MB: Gigabyte GA-P35-DS3 PSU: Cooler Master Extreme 650W
HDD: 1 x Maxtor 40GB (IDE) + 1 x WD 320 GB (IDE) @ IT8212F IDE RAID Controller Card (ATAPI BIOS)

Optical:
Sony DRU-810A @ DW1640 BSLB +Speed RPC1
BenQ DW1800 @ LH-20A1P KL0P FBL EOS EOHT6 RPC1 DIY
Pioneer DVR-112BK @ DVR-112L 8.25 +Speed RPC1

Gone:
Samsung SH-S182D @ TS-H652D KC03 RPC1

**C0deKing** · 26-03-2008

Quote:

Originally Posted by mognegna

...Do you think to add, in the future, a visualization of MIDs learned?

__________________
http://codeguys.rpc1.org/
LiteOn Tools: EEPROM Utility <-- New v6.2.0, Flash Utility <-- New v6.0.1, Settings Utility <-- New v1.2.1
Samsung Tools: Patch Utility <-- New v3.4.10
LiteOn Patches: Fast Read (FR) | Fast Burn (FB) | Enhanced OverSpeed (EOS) | Enhanced Online HyperTuning (EOHT)
BenQ Patches: Fast Burn (FB) | Enhanced SolidBurn (ESB)
Samsung Patches: Fast Read (FR) | Remove RipLock (RLR) | Fast Burn (FB) | Retain book type (BS) | Default DVD-ROM (ROMD)

The man who does things makes mistakes, but he who doesn't makes the biggest mistake of all - doing nothing. Benjamin Franklin

The Forum Rules

Click HERE to join cdfreaks.com

Cressida · 26-03-2008

Fantastic C0deKing! (and it works in Linux, unlike SmartBurn

).

Can I suggest for one of the future releases to include a bitsetting option as well (so many people get confused by the BookType Util.).

Quote:

Originally Posted by mognegna

Do you think to add, in the future, a visualization of MIDs learned?

Too cool, almost like a Plextor AutoStrategy Database

.

**C0deKing** · 27-03-2008

Quote:

Originally Posted by Cressida

Fantastic C0deKing! (and it works in Linux, unlike SmartBurn

).

Glad to hear it. Thanks for letting me know.

Quote:

Can I suggest for one of the future releases to include a bitsetting option as well (so many people get confused by the BookType Util.).

It would make sense for this tool to have it.

Quote:

Too cool, almost like a Plextor AutoStrategy Database

.

Unfortunately the changes made in the A3 drive have made this task more differcult. I might have to limit the feature to HT714 and later. Showing the older HTs last 5 discs is not a lot of use anyway.

__________________
http://codeguys.rpc1.org/
LiteOn Tools: EEPROM Utility <-- New v6.2.0, Flash Utility <-- New v6.0.1, Settings Utility <-- New v1.2.1
Samsung Tools: Patch Utility <-- New v3.4.10
LiteOn Patches: Fast Read (FR) | Fast Burn (FB) | Enhanced OverSpeed (EOS) | Enhanced Online HyperTuning (EOHT)
BenQ Patches: Fast Burn (FB) | Enhanced SolidBurn (ESB)
Samsung Patches: Fast Read (FR) | Remove RipLock (RLR) | Fast Burn (FB) | Retain book type (BS) | Default DVD-ROM (ROMD)

The man who does things makes mistakes, but he who doesn't makes the biggest mistake of all - doing nothing. Benjamin Franklin

The Forum Rules

Click HERE to join cdfreaks.com

*Bob* · 27-03-2008

Nice job C0deKing and the others

__________________
"You've got a hole in your soul if you don't dig the Blues" .....My Not So New Anymore *Build* is Finished.

Click HERE to join CDFreaks.com

Keith Richards ~ "If You Want The Last Laugh........Join The Rolling Stones"

Skylon · 27-03-2008

Quote:

Originally Posted by C0deKing

Glad to hear it. Thanks for letting me know.

It would make sense for this tool to have it.

Unfortunately the changes made in the A3 drive have made this task more differcult. I might have to limit the feature to HT714 and later. Showing the older HTs last 5 discs is not a lot of use anyway.

What about A1/A4 drives? It would be nice to know what has the drive learnt...

__________________
CPU: Intel E2160 M0 @ 3.0GHz (333x9) @ 1.375v @ Stock HSF GPU: Gigabyte GeForce 8600GT @ 700/1600
RAM: 2 x 1GB Kingston DDR2-667 @ 800 2.0v 4-4-4-12 MB: Gigabyte GA-P35-DS3 PSU: Cooler Master Extreme 650W
HDD: 1 x Maxtor 40GB (IDE) + 1 x WD 320 GB (IDE) @ IT8212F IDE RAID Controller Card (ATAPI BIOS)

Optical:
Sony DRU-810A @ DW1640 BSLB +Speed RPC1
BenQ DW1800 @ LH-20A1P KL0P FBL EOS EOHT6 RPC1 DIY
Pioneer DVR-112BK @ DVR-112L 8.25 +Speed RPC1

Gone:
Samsung SH-S182D @ TS-H652D KC03 RPC1

juancdg · 27-03-2008

Quote:

Originally Posted by Skylon

What about A1/A4 drives? It would be nice to know what has the drive learnt...

Same here

.

**C0deKing** · 27-03-2008

Quote:

Originally Posted by Skylon

What about A1/A4 drives? It would be nice to know what has the drive learnt...

For what reason? All you have to do is remember what the last 5 discs were that you burnt. It's not like the latest A3 firmware, where it now holds the most common used MIDs.

__________________
http://codeguys.rpc1.org/
LiteOn Tools: EEPROM Utility <-- New v6.2.0, Flash Utility <-- New v6.0.1, Settings Utility <-- New v1.2.1
Samsung Tools: Patch Utility <-- New v3.4.10
LiteOn Patches: Fast Read (FR) | Fast Burn (FB) | Enhanced OverSpeed (EOS) | Enhanced Online HyperTuning (EOHT)
BenQ Patches: Fast Burn (FB) | Enhanced SolidBurn (ESB)
Samsung Patches: Fast Read (FR) | Remove RipLock (RLR) | Fast Burn (FB) | Retain book type (BS) | Default DVD-ROM (ROMD)

The man who does things makes mistakes, but he who doesn't makes the biggest mistake of all - doing nothing. Benjamin Franklin

The Forum Rules

Click HERE to join cdfreaks.com

*jcusimano2* · 27-03-2008

Quote:

Originally Posted by C0deKing

For what reason? All you have to do is remember what the last 5 discs were that you burnt. It's not like the latest A3 firmware, where it now holds the most common used MIDs.

Understandable, CK, but it would still be neat to actually see it

**C0deKing** · 27-03-2008

I'll see what I can do but bitsetting will be first, as it's another setting.

__________________
http://codeguys.rpc1.org/
LiteOn Tools: EEPROM Utility <-- New v6.2.0, Flash Utility <-- New v6.0.1, Settings Utility <-- New v1.2.1
Samsung Tools: Patch Utility <-- New v3.4.10
LiteOn Patches: Fast Read (FR) | Fast Burn (FB) | Enhanced OverSpeed (EOS) | Enhanced Online HyperTuning (EOHT)
BenQ Patches: Fast Burn (FB) | Enhanced SolidBurn (ESB)
Samsung Patches: Fast Read (FR) | Remove RipLock (RLR) | Fast Burn (FB) | Retain book type (BS) | Default DVD-ROM (ROMD)

The man who does things makes mistakes, but he who doesn't makes the biggest mistake of all - doing nothing. Benjamin Franklin

The Forum Rules

Click HERE to join cdfreaks.com

Gyxx · 27-03-2008

Thank you so much C0deKing, you're great !!!!!

By the way, I have one (think stupid and noob) question about Smartbun/Hypertuning.

The drive remembers the strategies of last 5 mediacode burned or the last 5 writing stategies used ?

Thanks so much again

Gyxx

**C0deKing** · 27-03-2008

Hi Gyxx. The drive stores the last 5 discs that you burn. If the next burn is the same MID as one of these disc then the drive will use the stored information. Otherwise it starts from scratch.

The latest A3 test firmware stores the last 4 discs burned and the last 8 MIDs used. Only the least used MIDs are removed if you use more than 8 different media types, which is a much better way to do it.

__________________
http://codeguys.rpc1.org/
LiteOn Tools: EEPROM Utility <-- New v6.2.0, Flash Utility <-- New v6.0.1, Settings Utility <-- New v1.2.1
Samsung Tools: Patch Utility <-- New v3.4.10
LiteOn Patches: Fast Read (FR) | Fast Burn (FB) | Enhanced OverSpeed (EOS) | Enhanced Online HyperTuning (EOHT)
BenQ Patches: Fast Burn (FB) | Enhanced SolidBurn (ESB)
Samsung Patches: Fast Read (FR) | Remove RipLock (RLR) | Fast Burn (FB) | Retain book type (BS) | Default DVD-ROM (ROMD)

The man who does things makes mistakes, but he who doesn't makes the biggest mistake of all - doing nothing. Benjamin Franklin

The Forum Rules

Click HERE to join cdfreaks.com

Gyxx · 27-03-2008

Thanks again, I do agree with you that new A3 approach has more sense

, hope they'll made new A1/A4 firmware with the same method.

If I have good understood, burning 2 MCC3R2 disks at 12x and 8x will use only one slot since they share same media code, and learnt info can be used also for a next 4x burning.

If the drive works in this way, what is the best writing speed to make the drive learn good ?

Again, there's one way to store/restore learnt stategies ?

I do like to try new firmware hacks

, as all in this forum, but i also like not to start from beginng each time i restore the version i like the most.

Sorry if all these questions were very noob, i tried to look for these info in the forum before asking but found nothing

.

Thanks again for your hacks and answers

Gyxx

**H3rB3i** · 27-03-2008

thanks COdeKing.

also added an entry to the Software Section @www.cdfreaks.com

__________________
Click here to checkout my Review PC

Join us
The ultimate READ FIRST

*Dalen Quaice* · 27-03-2008

Quote:

Originally Posted by C0deKing

For what reason? All you have to do is remember what the last 5 discs were that you burnt. It's not like the latest A3 firmware, where it now holds the most common used MIDs.

It would be nice to see it (and perhaps a special display for the A3 now that it's different) - espeically if you don't burn with the drive daily and forget like I do!

__________________
My favorite daily burning drives:
Plextor 712A - 1.09 NEC AD-7200A - 1.05 Liggy BenQ 1640 Grey OEM - BSMB LG GSA-H22N - 1.02
My favorite media:
RicohJPN R01, RicohJPN R03, MCC 003, MCC 004, Optodisc R16
Testing:
Pioneer BDR-203 Blu-Ray

Cressida · 27-03-2008

Quote:

Originally Posted by C0deKing

Glad to hear it. Thanks for letting me know.

I should clarify that (similarly to CDSpeed) it only works with SATA and USB drives (which are handled as SCSI devices in Linux). In my enthusiasm I forgot about IDE devices, which I don't have installed. Something about Linux' IDE implementation, but don't ask me what

.

Attached Images

Untitled232.png (21.7 KB, 4313 views)

_chef_ · 27-03-2008

Superb tool!

**C0deKing** · 29-03-2008

Released Settings Utility v1.1.0

* Renamed Settings tab to Options tab
* Added bitsetting

See the first post for more details.

Attached Images

Settings_Utility6-1.1.0.png (22.9 KB, 4183 views)

__________________
http://codeguys.rpc1.org/
LiteOn Tools: EEPROM Utility <-- New v6.2.0, Flash Utility <-- New v6.0.1, Settings Utility <-- New v1.2.1
Samsung Tools: Patch Utility <-- New v3.4.10
LiteOn Patches: Fast Read (FR) | Fast Burn (FB) | Enhanced OverSpeed (EOS) | Enhanced Online HyperTuning (EOHT)
BenQ Patches: Fast Burn (FB) | Enhanced SolidBurn (ESB)
Samsung Patches: Fast Read (FR) | Remove RipLock (RLR) | Fast Burn (FB) | Retain book type (BS) | Default DVD-ROM (ROMD)

The man who does things makes mistakes, but he who doesn't makes the biggest mistake of all - doing nothing. Benjamin Franklin

The Forum Rules

Click HERE to join cdfreaks.com

*jcusimano2* · 29-03-2008

@ CK,
I have already got rid or smartburn this is it!!

This tool is awesome I really like the sound (Audio) that lets you know that a setting has been applied successfully.

Skylon · 29-03-2008

Quote:

Originally Posted by C0deKing

Released Settings Utility v1.1.0

* Renamed Settings tab to Options tab
* Added bitsetting

See the first post for more details.

Thank you CK!

__________________
CPU: Intel E2160 M0 @ 3.0GHz (333x9) @ 1.375v @ Stock HSF GPU: Gigabyte GeForce 8600GT @ 700/1600
RAM: 2 x 1GB Kingston DDR2-667 @ 800 2.0v 4-4-4-12 MB: Gigabyte GA-P35-DS3 PSU: Cooler Master Extreme 650W
HDD: 1 x Maxtor 40GB (IDE) + 1 x WD 320 GB (IDE) @ IT8212F IDE RAID Controller Card (ATAPI BIOS)

Optical:
Sony DRU-810A @ DW1640 BSLB +Speed RPC1
BenQ DW1800 @ LH-20A1P KL0P FBL EOS EOHT6 RPC1 DIY
Pioneer DVR-112BK @ DVR-112L 8.25 +Speed RPC1

Gone:
Samsung SH-S182D @ TS-H652D KC03 RPC1

*minaelromany* · 29-03-2008

Excellent tool CK

I will stick to version 1.0.0 though because I am very afraid of Booktyping with my 20A4P , because I've already lost 3 x 20A1P because of Booktyping (I think

)

__________________
Core i7 920 @4.25 with Noctua NH-D14
Asus Rampage III Extreme
6GB Triple Channel OCZ Blade DDR3 2025 9-9-9-24-1T
HD6990+HD6970@950Mhz/6Ghz GDDR5! Tri-Fire
3 BenQ 2420HD 1080p 24" Widescreen LCD in Eyefinity
OCZ Vertex 2 50GB SSD + 3x1.0TB WD Black+WD 1.0TB Green+640GB WD Blue
X-Fi Titanium-Cambridge SoundWorks DTT 3500 Digital
Seasonic X-850
NZXT Phantom Red Edition

DVD Burners :
Samsung 203B SB03
NEC Optiarc AD-7200S
ASUS 1608P3S@Pioneer 111L 8.29
Sony 810A@Benq 1640 BSLB
Retail Benq 1640 BSLB
LiteOn iHAS120
Best Media : Panasonic TYG03 / Samsung Pleomax OPTODISC R16 / Verbatim MCC004 / CMC MAG E01
Boycott every faked/low quality media

Settings Utility for LiteOn DVD Writers (v1.2.1)

Similar Threads

Search this Thread

People who found this also searched for