Trouble with DL burn
| BenQ / Philips Writer Discuss, Trouble with DL burn at CD and DVD Writers forum; I am not even sure if this is the correct forum, bad way to start the first sentence, but I do own a 1650. For some reason, which, I have been unable to figure out, everytime I try and burn a Verbatim DL, the burn process hangs around 46% or |
Posted: 27-04-2006 - #1
| I am not even sure if this is the correct forum, bad way to start the first sentence, but I do own a 1650. For some reason, which, I have been unable to figure out, everytime I try and burn a Verbatim DL, the burn process hangs around 46% or so. I rendered a football game with TMPEGnc, avi to mpeg 16:9, authored with Architect Lite and am trying to burn with Nero 6.6. Two weeks ago using the same avi file (rendered to 4:3) and same menu system, I was able to burn without any problems. I did everything this same, except I rendered the avi to a different aspect ratio, which shouldn't have any bearing on the burning. The discs are coming out of the same box I used a couple of weeks ago. GSpot says there is a corrupt header - " This is an invalid AVI file due to corruption of the data in the header. This is a serious problem, and this file is not likely to playable - Details: While processing chunk /RIFF:AVI , found bad length value 1073521156 at file offset 0x000107f8" - could this cause my burning issue? Here is the Nero log (I can't make sense of it): AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1023MB (1048092kB) Free physical memory: 545MB (559024kB) Memory in use : 46 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 26.4.2006 UDF/ISO compilation 10:19:08 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation started 10:19:08 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation completed (no file modified) 10:19:08 PM #3 Text 0 File Isodoc.cpp, Line 6314 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 10:19:08 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832 DVD-Video files sorted 10:19:08 PM #5 Text 0 File Reader.cpp, Line 127 Reader running 10:19:08 PM #6 Text 0 File Writer.cpp, Line 122 Writer BENQ DVD DD DW1650 running 10:19:08 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 10:19:08 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 10:19:08 PM #9 Text 0 File Burncd.cpp, Line 3231 Turn on Disc-At-Once, using DVD media 10:19:11 PM #10 Text 0 File DlgWaitCD.cpp, Line 269 Last possible write address on media: 4173823 (927:30.73, 8151MB) Last address to be written: 3972991 (882:53.16, 7759MB) 10:19:11 PM #11 Text 0 File DlgWaitCD.cpp, Line 281 Write in overburning mode: NO (enabled: CD) 10:19:11 PM #12 Text 0 File DlgWaitCD.cpp, Line 2477 Recorder: BENQ DVD DD DW1650, Media type: DVD+R9 Double Layer 10:19:11 PM #13 Text 0 File DlgWaitCD.cpp, Line 447 >>> Protocol of DlgWaitCD activities: <<< ========================================= 10:19:11 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 3972992 (3972992) = #3972992/882:53.17 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3972992 blocks [BENQ DVD DD DW1650] -------------------------------------------------------------- 10:19:11 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [BENQ DVD DD DW1650] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 8136687616, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 3972992 | lead-out | 1 | 0x41 | 0x00 10:19:11 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 10:19:11 PM #17 Text 0 File Burncd.cpp, Line 4116 Cache writing successful. 10:19:11 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 10:19:11 PM #19 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 2.4x (3,324 KB/s) 10:19:11 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2643 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 10:19:11 PM #21 SCSI -1066 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x04E50800 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x21 0x08 0x04 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x24 0x00 10:19:11 PM #22 Text 0 File DVDPlusDualLayer.cpp, Line 611 L0 Data Zone Capacity set to 1986560 (1E5000h, 3880MB) -> OK, confirmed setting 10:19:11 PM #23 CDR -1205 File DVDPlusDualLayer.cpp, Line 638 Burning Layer 1 10:19:11 PM #24 Text 0 File DVDPlusDualLayer.cpp, Line 648 Start writing layer 1 at address 0 (0h) Recording mode: unknown Recording Mode 10:19:11 PM #25 SCSI -1066 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x04E50800 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x24 0x00 10:19:11 PM #26 CDR -1207 File DVDR.cpp, Line 4988 Book Type automatically set to: Current recorder setting 10:19:11 PM #27 Text 0 File DVDPlusRW.cpp, Line 663 Start write address at LBA 0 DVD high compatibility mode: Yes 10:40:52 PM #28 SCSI -1135 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x033A0000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x1E 0x17 0xC0 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x0C 0x00 10:40:52 PM #29 CDR -1135 File Writer.cpp, Line 311 Write error 10:40:52 PM #30 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 10:40:52 PM #31 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 10:40:54 PM #32 Phase 127 File dlgbrnst.cpp, Line 1832 Generating DVD high compatibility borders 10:41:14 PM #33 Phase 129 File dlgbrnst.cpp, Line 1832 Generating DVD borders completed successfully 10:41:14 PM #34 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 2.4x (3,324 KB/s) |
- Today (MyCE Staff)
- Posts: 15,596
| |
Posted: 27-04-2006 - #2
| Update Nero. But the best idea is to create an image using nero and then burn it using ImgBurn!
__________________ 'Things are now in motion that cannot be undone.' [Gandalf, LoTR] Enable DMA with micrAp$0ft Enable DMA free at your will busTRACE => Upper/Lower Filters Util DevCon ***HOW TO ... Delete the Upper & Lower Filters!***  If you expect help then please start now by using the powerful SEARCH. ....................... sick of spam?  Try free Spybot and Threatfire .......................... |
Posted: 27-04-2006 - #4
| ImgBurn is newer.
__________________ 'Things are now in motion that cannot be undone.' [Gandalf, LoTR] Enable DMA with micrAp$0ft Enable DMA free at your will busTRACE => Upper/Lower Filters Util DevCon ***HOW TO ... Delete the Upper & Lower Filters!*** If you expect help then please start now by using the powerful SEARCH. ....................... sick of spam? Try free Spybot and Threatfire .......................... |
Posted: 28-04-2006 - #5
| I created an image with Nero, did a test write with ImgBurn which said was successful, so I attempted a burn and it failed on me again at 49%. ImgBurn's error was - Failed to Write Sectors 1959808 - 1959839 - Write Error. At the start ImgBurn stated - This image has not been mastered correctly for burning onto a double layer (OTP Track Path) disc. None of the cells meet the 'DVD-Video Specification' criteria for a potential layer break position. ImgBurn also stated - Optimal L1 Data Zone Start LBA: None Found! (VTS_01). Maybe my issue lies with the layer break or this is becoming my conclusion. I authored with Sony Architect with the preferences set to 8.5 GB. I have tried burning with Architect and putting a layer break where it tells me to, but still can't burn this disc. |
Posted: 28-04-2006 - #6
| Yes, the LB seems to be the root of all trouble here.
__________________ 'Things are now in motion that cannot be undone.' [Gandalf, LoTR] Enable DMA with micrAp$0ft Enable DMA free at your will busTRACE => Upper/Lower Filters Util DevCon ***HOW TO ... Delete the Upper & Lower Filters!*** If you expect help then please start now by using the powerful SEARCH. ....................... sick of spam? Try free Spybot and Threatfire .......................... |
WIN your own LG N2B1 NAS with 2TB of Storage!*
To win, tell us why you want to win and
tell ,or show us (graphic, video, etc.) why you think Life's Good with LG NAS.
*US only Not registered yet? Register now!