BenQ EW164B (BEFB) Firmware:
| BenQ / Philips Writer Discuss, BenQ EW164B (BEFB) Firmware: at CD and DVD Writers forum; The read transfer rate 'problem' is no problem, it took just one second longer. As already said by beach-hobo, the write speed might make a difference. __________________ LiteOn/Benq/LG/NEC/Pioneer/Samsung/Toshiba stuff: MediaCodeSpeedEdit V 1.2.0.5, released November 17th 2009 |
Posted: 17-09-2005 - #51
| The read transfer rate 'problem' is no problem, it took just one second longer. As already said by beach-hobo, the write speed might make a difference.
__________________ LiteOn/Benq/LG/NEC/Pioneer/Samsung/Toshiba stuff: MediaCodeSpeedEdit V 1.2.0.5, released November 17th 2009 |
- Today (MyCE Staff)
- Posts: 15,596
| |
Posted: 17-09-2005 - #52
| Quote:
__________________ LiteOn/Benq/LG/NEC/Pioneer/Samsung/Toshiba stuff: MediaCodeSpeedEdit V 1.2.0.5, released November 17th 2009 |
Posted: 17-09-2005 - #53
| Quote:
 I only have 8x -R discs (TYG02) so I've turned OverSpeed On. Note that Solid Burn has always been enabled for both Supported and Un-Known discs. I haven't cleaned the Learned Disc entries after crossflashing. These are the first 16x burns as I have only been burning at 8x and 12x. First burn is with WOPC On and second is with WOPC Off. I've included the PIE and PIF scans as well. The spikes at around 1.4GB are always there (between 3 and 6) on these TYG02s even when burning at 8x. |
Posted: 17-09-2005 - #54
| Quote:
Were these scans done with the drive in the External PL-3507 Case ??? And THANKS for all the testing your doing for us !!! |
Posted: 17-09-2005 - #55
| Quote:
Yes, both discs were scanned with the drive in the external enclosure. I only have a laptop here at home so I have no choice Here they are again, this time scanned by a BenQ 1620 in a ALi M5621 based USB2.0 enclosure. Burst rate of 20MB/s. Again, first is WOPC On and second is WOPC Off. |
Posted: 17-09-2005 - #56
| Quote:
|
Posted: 17-09-2005 - #57
| Quote:
Both discs were burnt in the DW1640 flashed to EW164B in the PL-3507 external enclosure. Connected via 1394, the burst rate is 27MB/s so no problem with 16x burning. |
Posted: 17-09-2005 - #58
| @mankmeister I want to thank for the work you have done... I have a DW1620 in a PL-3507 Case (Extermal Firmware) and because of the UDMA3 SetUp it just gets to 15.4 MB/s only. Guess it time for a DW1640 (UDMA4). From your testing I now know it's possible !!! |
Posted: 17-09-2005 - #59
| Here's another couple of burns ... this time from an ISO file. First is WOPC On and it looks like it kicked in and restricted the burn to 12x. Second is WOPC Off and it approached 16x. |
Posted: 17-09-2005 - #63
| Hi mankmeister I don't doubt that you had WOPC Off according to your s/w, however looking at your scans it appears that WOPC is On in both scans due to tell tale rythmic dips in write curve. I suggest that in post # 59 the difference is down to solid burn. See the difference in the write curves of mine in posts # 61 & 62. Quite different I think you'll agree. |
Posted: 17-09-2005 - #65
| Cause the 1620 doesn't support solidburn. Quote:
__________________ Pioneer DVR-215D@215 f/w1.22 Pioneer BDR-205BK f/w1.04 BenQ DW1640 f/wBSOB Lite-On LTC-48161H f/wKH0R 2xLG GGC-H20L f/w1.03 |
Posted: 17-09-2005 - #66
| I downloaded the firmware from The Dangerous Brothers web site, since the FAQ showed that their firmware was an easy way to flash one drive to the other. I ran it, selected my BenQ 1640 drive from the list, then clicked the Upgrade button and nothing happened other than the Upgrade button becoming disabled. Did I do something wrong? |
Posted: 17-09-2005 - #67
| You have to use WinDWFlash and the .cvt  and the same proceedure to get back. |
Posted: 17-09-2005 - #69
| Quote:
So is there a CVT version of BSLB around somewhere? |
Posted: 18-09-2005 - #72
| Zebadee, notice I said Qscan, not SolidBurn/Overspeed. It appears to work, but errors out after about 20-30 seconds. That's with all the variants except smart, which appears to work properly but claims that all media I've tried isn't recommended at ANY speed, be it 2.4x or 16x or anything in between. Try it and let me know if you get the same behaviour. Q. |
Posted: 18-09-2005 - #73
| Quote:
Sorry trying to do too many things at once & read quickly was sure it said QSuite. Anyway in answer to your query, yes it's same for me. Hadn't actually tried QScan till now with this f/w. |
There's more to MyCE.com
Listen up, we've got more. Product information on 107,830 products. Our experts have written 540 articles. We've gathered 16,487 news items for you to always keep updated.
Posting Rules
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
People who found this also searched for
- benq ew164b firmware
- genesys logic usb storage device filter driver disk
- toast iso 9660 builder copyright
- 5.1.2600.2549 ohci1394.sys download
- aopen duw1616 arr dvd d-rw firmware
- befb benq
- befb ew164b
- beno-ew164b
- benq 164b befb firmware download
- benq 164b firmware
- benq 164b firmware update
- benq 23.65 reviews
- benq befb
- benq dd ew164b treiber
- benq dd ew164b treiber download
- benq dvd dd ew 164b
- benq dvd dd ew 164b begb
- benq dvd dd ew164b
- benq dvd dd ew164b befb
- benq dvd dd ew164b drivers
- benq dvd dd ew164b drivers xp
- benq dvd dd ew164b firmware
- benq dvd dd ew164b treiber
- benq dvd dd ew164b treiber windows 7
- benq dvd dd ew164b usb device
- benq dvd dd ew164b usb device driver
- benq dvd dd ew164b usb device драйвер скачать
- benq dvd dd ew164b usb device treiber
- benq dw164b firmware
- benq ew 164b firmware