MediaCodeSpeedEdit support for LG DVD-Writers

LG Writer Discuss, MediaCodeSpeedEdit support for LG DVD-Writers at CD and DVD Writers forum; I used several rip programs with several discs. All programs and all discs ripped well with my other dvd burner, but not with the LG GSA-E10L. One time I waited for 2 hours and still the disc was ripped only 20MB. PS. All other jobs worked well with the LG.

Old Posted: 11-02-2007
default_avatar
PBA (New on Forum)
Posts: 6
  • Find More Posts by PBA
I used several rip programs with several discs. All programs and all discs ripped well with my other dvd burner, but not with the LG GSA-E10L.
One time I waited for 2 hours and still the disc was ripped only 20MB.

PS. All other jobs worked well with the LG. burning, reading, rewriting etc, Both CD and DVD. Full speed!
default_avatar
Today (MyCE Staff)
Posts: 15,596
Old Posted: 11-02-2007
default_avatar
VelleX (CD Freaks Member)
Posts: 134
  • Find More Posts by VelleX
Well, even with 1x speed the Drive should not take more than 2 hours for a complete DL DVD.
And with the standard speed when riplocked your drive should not take more than 30 minutes for a complete DL DVD.
Old Posted: 11-02-2007
default_avatar
kallek (CD Freaks Rookie)
Posts: 34
  • Find More Posts by kallek
I used Media speed edit 1.0.9.6 with my LG 4040b and now I can burn the DVD-r discs I modified in the firmware. However, since I flashed the drive with the modified firmware, it is unable to write to my DVD-ram disc. I can view the content of the disc (although it takes quite a while for the drive to recognize it), but when I try to copy something to it, it says that the disc structure is corrupt. I also noticed that when I open a firmware in mcse it doesn't list media codes for DVD-ram discs. Is this a known bug?
Old Posted: 11-02-2007
ala42 (MediaCodeSpeedEdit Author)
Posts: 4,814
  • Find More Posts by ala42
Quote:
Originally Posted by PBA
I am unable to perform the test with video DVD's. I receive the following error: " Error! No additional sense information". I tried several discs.
Below the results of the DVD data test:
You have to play the video for a few seconds with a DVD player software to unlock the copy protection, then run the TRT.
__________________
LiteOn/Benq/LG/NEC/Pioneer/Samsung/Toshiba stuff: MediaCodeSpeedEdit V 1.2.0.5, released November 17th 2009
Old Posted: 11-02-2007
ala42 (MediaCodeSpeedEdit Author)
Posts: 4,814
  • Find More Posts by ala42
Quote:
Originally Posted by kallek
I used Media speed edit 1.0.9.6 with my LG 4040b and now I can burn the DVD-r discs I modified in the firmware. However, since I flashed the drive with the modified firmware, it is unable to write to my DVD-ram disc.
Which firmware did you use before, which firmware did you modify ? How does the drive behave if you flash this firmware without modifying it ?
Quote:
I also noticed that when I open a firmware in mcse it doesn't list media codes for DVD-ram discs. Is this a known bug?
No, it is a missing feature.
__________________
LiteOn/Benq/LG/NEC/Pioneer/Samsung/Toshiba stuff: MediaCodeSpeedEdit V 1.2.0.5, released November 17th 2009
Old Posted: 12-02-2007
default_avatar
kallek (CD Freaks Rookie)
Posts: 34
  • Find More Posts by kallek
I was using the latest firmware for the drive. A304. It is also this firmware which I have modified. Before modifying the firmware I could write files to the dvd-ram disc like I copy files to a harddrive using windows explorer.
Old Posted: 12-02-2007
ala42 (MediaCodeSpeedEdit Author)
Posts: 4,814
  • Find More Posts by ala42
Quote:
Originally Posted by kallek
I was using the latest firmware for the drive. A304. It is also this firmware which I have modified. Before modifying the firmware I could write files to the dvd-ram disc like I copy files to a harddrive using windows explorer.
I do not think that has anything to do with modifying the firmware. Flash the original firmware and try again.
__________________
LiteOn/Benq/LG/NEC/Pioneer/Samsung/Toshiba stuff: MediaCodeSpeedEdit V 1.2.0.5, released November 17th 2009
Old Posted: 12-02-2007
default_avatar
PBA (New on Forum)
Posts: 6
  • Find More Posts by PBA
Hi ala42,

Thanks for your efforts. Unfortunately this still doesn't work. I flashed back to the original update LE06, waiting for a solution.

If you want me to test drive a future release of MCSE, please feel free to send me a mail!

Bas
Old Posted: 12-02-2007
default_avatar
kallek (CD Freaks Rookie)
Posts: 34
  • Find More Posts by kallek
Quote:
Originally Posted by ala42
I do not think that has anything to do with modifying the firmware. Flash the original firmware and try again.
I flashed back to the original firmware and I still got the same error message. I'm beginning to think that it an UDF 2.5 driver I installed a while back ago that is causing it. Don't know how to uninstall it though. I'll try to reformat the disc and see if it solves anything.
Old Posted: 13-02-2007
ala42 (MediaCodeSpeedEdit Author)
Posts: 4,814
  • Find More Posts by ala42
Quote:
Originally Posted by PBA
Hi ala42,

Thanks for your efforts. Unfortunately this still doesn't work. I flashed back to the original update LE06, waiting for a solution.
Did you follow the instructions of post #554 ? With or without riplock, this has to work.
__________________
LiteOn/Benq/LG/NEC/Pioneer/Samsung/Toshiba stuff: MediaCodeSpeedEdit V 1.2.0.5, released November 17th 2009
Old Posted: 13-02-2007
GumbyQc (New on Forum)
Posts: 2
  • Find More Posts by GumbyQc
I have a GSA-H30L and HP did release a firmware update for it a few days ago.

http://h10025.www1.hp.com/ewfrf/wc/s...os=228&lang=en

Since MediaCodeSpeedEdit did not support it for now, is there a way that I can help to test it ?

I open the W60C6CQC.bin file (2006/12/26 15:31) with MediaCodeSpeedEdit and I can see this :

Media Code Speed Edit V 1.0.9.7
------------------------------------------
Firmware:
Bootcode: HL-DT-STDVD-RAM NEVERDIEN015
------------------------------------------
(...)

Thanks.
Old Posted: 13-02-2007
ala42 (MediaCodeSpeedEdit Author)
Posts: 4,814
  • Find More Posts by ala42
Welcome to cdfreaks
This firmware uses the same bootcode as the H31N firmware. In a first test you could check if the displayed write speeds match reality.
__________________
LiteOn/Benq/LG/NEC/Pioneer/Samsung/Toshiba stuff: MediaCodeSpeedEdit V 1.2.0.5, released November 17th 2009
Old Posted: 13-02-2007
GumbyQc (New on Forum)
Posts: 2
  • Find More Posts by GumbyQc
Quote:
Originally Posted by ala42
This firmware uses the same bootcode as the H31N firmware. In a first test you could check if the displayed write speeds match reality.
There's nothing on the Firmware Rev. line on the H31N ?

I've check four DVD-R (Comstar, Memorex, Verbatim, HP), one DVD+RW (Memorex) and two DVD+R DL (Memorex+Verbatim) and they are all match. Even a cheap WallMart's Comstar 8x DVD-R (UME01) witch I can burn only at 2x before this new firmware upgrade is now at 8x as it should be (I was interrested by MediaCodeSpeed for that reason at first, but the new firmware correct that --but I'm sure that I'll need it sooner or later--).

Ready for the 2nd test !

PS: I'ved use MediaCodeSpeed successfuly a year ago for my old GSA-4040b. Great tool !
Old Posted: 14-02-2007
default_avatar
PBA (New on Forum)
Posts: 6
  • Find More Posts by PBA
Yes I did. Here are the results. Hope you can do something with it.
Thanks

Bas
Attached Images
File Type: png HL-DT-STDVDRAM_GSA-E10L_LE06_2.png (71.7 KB, 179 views)
Old Posted: 15-02-2007
ala42 (MediaCodeSpeedEdit Author)
Posts: 4,814
  • Find More Posts by ala42
Quote:
Originally Posted by PBA
Yes I did. Here are the results. Hope you can do something with it.
12x max read speed for a DL disk is ok. Why do you think there still is a riplock ?
__________________
LiteOn/Benq/LG/NEC/Pioneer/Samsung/Toshiba stuff: MediaCodeSpeedEdit V 1.2.0.5, released November 17th 2009
Old Posted: 15-02-2007
default_avatar
VelleX (CD Freaks Member)
Posts: 134
  • Find More Posts by VelleX
Because of that ^^

Quote:
Originally Posted by PBA
I used several rip programs with several discs. All programs and all discs ripped well with my other dvd burner, but not with the LG GSA-E10L.
One time I waited for 2 hours and still the disc was ripped only 20MB.

PS. All other jobs worked well with the LG. burning, reading, rewriting etc, Both CD and DVD. Full speed!
Old Posted: 15-02-2007
0301orih (CD Freaks Senior Member)
Posts: 499
  • Find More Posts by 0301orih
I also think the H42N has a Riplock.

The movie: Hitch (Fullscreen)
The Setup: 1Click 5.1.1.6 Movie & Extras
Source Size: 7.2874GB
Video Compression: 39%


2/10/2007 1:58:24 PM info Source : [F] HL-DT-ST DVDRAM GSA-H42N RL00 (Ide)
2/10/2007 2:24:40 PM info Transcoding time: 0:26:16

2/10/2007 2:26:43 PM info Source : [G] TSSTcorp CD/DVDW SH-S182D SB04 (Ide)
2/10/2007 2:41:52 PM info Transcoding time: 0:15:09

2/10/2007 3:00:10 PM info Source : [i] LITE-ON DVDRW LH-20A1H LL05 (Scsi)
2/10/2007 3:12:26 PM info Transcoding time: 0:12:15

2/10/2007 3:59:33 PM info Source : [J] HL-DT-ST DVD-RAM GSA-H22N 1.00 (Scsi)
2/10/2007 4:15:38 PM info Transcoding time: 0:16:05

2/10/2007 3:16:17 PM info Source : [K] SONY DVD RW DW-G120A MYR5 (Scsi)
2/10/2007 3:32:00 PM info Transcoding time: 0:15:42

2/10/2007 3:38:07 PM info Source : [L] Optiarc DVD RW AD-7170A 1.02 (Scsi)
2/10/2007 3:50:22 PM info Transcoding time: 0:12:11
__________________
Pioneer DVR-111L 8.29, Pioneer DVR-112D@112L 8.09, Pioneer DVR-112D@A12L 1.15
Samsung SH-S182M SB02
BenQ DW1655 x2 BCDB speedpatched/BCIB
LG H55N 1.00, LG H42N RJ11 Speedpatched, LG H22N 1.01, LG H22L 1.00
Lite-On SH-16A7S SATA WS04 FB-EOS, Lite-On LH-18A1P@BenQ DW1800 ZB35 FB , Lite-On LH-20A1H LL0A FB-EOS
TOSHIBA DVD/HDX807616 MC08
Old Posted: 15-02-2007
ala42 (MediaCodeSpeedEdit Author)
Posts: 4,814
  • Find More Posts by ala42
Quote:
Originally Posted by 0301orih
I also think the H42N has a Riplock.
I know the H42N RJ11 it has a riplock, and I already have a non released patch for it, but PBA has a GSA-E10L, that rips fast.
__________________
LiteOn/Benq/LG/NEC/Pioneer/Samsung/Toshiba stuff: MediaCodeSpeedEdit V 1.2.0.5, released November 17th 2009
Old Posted: 15-02-2007
0301orih (CD Freaks Senior Member)
Posts: 499
  • Find More Posts by 0301orih
Quote:
Originally Posted by ala42
I know the H42N RJ11 it has a riplock, and I already have a non released patch for it, but PBA has a GSA-E10L, that rips fast.
Oh, that is great!

BTW, my E10L rips fast.
__________________
Pioneer DVR-111L 8.29, Pioneer DVR-112D@112L 8.09, Pioneer DVR-112D@A12L 1.15
Samsung SH-S182M SB02
BenQ DW1655 x2 BCDB speedpatched/BCIB
LG H55N 1.00, LG H42N RJ11 Speedpatched, LG H22N 1.01, LG H22L 1.00
Lite-On SH-16A7S SATA WS04 FB-EOS, Lite-On LH-18A1P@BenQ DW1800 ZB35 FB , Lite-On LH-20A1H LL0A FB-EOS
TOSHIBA DVD/HDX807616 MC08
Old Posted: 15-02-2007
default_avatar
PBA (New on Forum)
Posts: 6
  • Find More Posts by PBA
Because, still, none of my rip programs work with this drive. No problems with other drives.
Is there an other known patch available?
Old Posted: 15-02-2007
ala42 (MediaCodeSpeedEdit Author)
Posts: 4,814
  • Find More Posts by ala42
cdspeed TRTs show the drive works fine and transfers the data at high speed, so there is nothing to patch on the drive. The problem must by caused by something else.
__________________
LiteOn/Benq/LG/NEC/Pioneer/Samsung/Toshiba stuff: MediaCodeSpeedEdit V 1.2.0.5, released November 17th 2009
Old Posted: 15-02-2007
El_Mariachi_X (MyCE Resident)
Posts: 1,059
  • Find More Posts by El_Mariachi_X
Quote:
Originally Posted by ala42
I know the H42N RJ11 it has a riplock, and I already have a non released patch for it, but PBA has a GSA-E10L, that rips fast.

is it a read speed patch or just a riplock patch?
__________________
You wrote that the world doesn't need a savior but every day i hear people crying for one - Kal El
Old Posted: 15-02-2007
default_avatar
VelleX (CD Freaks Member)
Posts: 134
  • Find More Posts by VelleX
riplock is a speed lock, which disables fast reading speeds for DVD-Video Discs, so the riplock patch removes that speed lock.

Or what do you mean with "just a riplock patch"
Old Posted: 15-02-2007
El_Mariachi_X (MyCE Resident)
Posts: 1,059
  • Find More Posts by El_Mariachi_X
TDB say they're riplock patches only work on pressed dvd video not dvdrs
__________________
You wrote that the world doesn't need a savior but every day i hear people crying for one - Kal El
Old Posted: 15-02-2007
default_avatar
VelleX (CD Freaks Member)
Posts: 134
  • Find More Posts by VelleX
EDIT: LG FAQ says:
TDB's website also has some anti-riplock firmware for these drives, but it only removes the riplock for DVD-VIDEO and DVD-ROM media. It does not remove the riplock for DVD+/-R media.

So, i think MCSE removes it for DVD+/-R too (if there is a riplock for it. I never tested)
WIN your own LG N2B1 NAS with 2TB of Storage!*

To win, tell us why you want to win and tell ,or show us (graphic, video, etc.) why you think Life's Good with LG NAS.
*US only  Not registered yet? Register now!

Hello guest,
default
To benefit from all extra features you need to log in or sign up.
signup log in

Search this Thread

New Posts

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Similar Threads

People who found this also searched for

  • 5540 dvd driver vista dell write 64 download
  • acer cpu usage 100 system idle process
  • actualizar firmware gwa4080ma
  • anti-riplock firmware dowloand
  • atapi device cannot be found gh22lp20
  • atapi ihas 122 a driver baixar
  • auto rpc2
  • baixar drive do gravador de dvd lg gsa h55n
  • bddvdrw ggc-h20n firmwaren lg-electronics
  • bh08ls20 probleme bluebird
  • bitsetting hl-dt-st gsa-4082
  • blue ray? hl-dt-st dvdrw ggc-h20n ata device
  • bluebird entfernen
  • booting dengan hl-dt-st dvdram gh22ns50
  • brenner gt10n firmware
  • c2 error gh22ls
  • can't find target drive gsa-t50l
  • can't find the target drive driveupdater bh08ns20
  • can't find the target drive ggc-h20n
  • cannot boot with dvd ram gh22ns
  • cant find target drive firmware gsa-t50n
  • cant find the target drive h10n
  • cd & dwd-maker megaupload.com
  • cd rom slow ripping speed windows 7
  • change dvd region lg gsa-h44n
  • cmc mag m01 gh22ls50
  • cprm hl-dt-st dvdram gsa-44n
  • crack flash gsa-h30l
  • cross flash gh22np20
  • crossflash drive seagate
All times are GMT +2. The time now is 09:01.
Top