| |||||||
 |
| | LinkBack | Thread Tools |
05-07-2012
| #1 |
| New Member Join Date: Jul 2012
Posts: 6
| DVD-RAM GH22NS30: can no longer burn DVD+R DL after firmware upgrade Updated the firmware to 2.0. Since then Writing the 8x Omega DVD+R DLs I have at home doesn't work. Trying to burn an image in Windows 7/Imgburn: Code: I 15:12:42 ImgBurn Version 2.5.7.0 started! I 15:12:42 Microsoft Windows 7 Professional x64 Edition (6.1, Build 7601 : Service Pack 1) I 15:12:42 Total Physical Memory: 4 192 752 KB - Available: 2 920 372 KB W 15:12:42 Duplex Secure's SPTD driver can have a detrimental effect on drive performance. I 15:12:42 Initialising SPTI... I 15:12:42 Searching for SCSI / ATAPI devices... I 15:12:43 -> Drive 1 - Info: HL-DT-ST DVD-RAM GH22NS30 2.00-09 (D:) (SATA) I 15:12:43 -> Drive 2 - Info: EBYPAF O9AVG9ENOX6 1.04 (F:) (SCSI) I 15:12:43 Found 1 DVD±RW/RAM and 1 BD-ROM! I 15:12:47 Operation Started! I 15:12:47 Source File: E:\spec ops the line.iso I 15:12:47 Source File Sectors: 3 511 088 (MODE1/2048) I 15:12:47 Source File Size: 7 190 708 224 bytes I 15:12:47 Source File Volume Identifier: Spec Ops The Lin I 15:12:47 Source File Application Identifier: UltraISO V9.5 CD & DVD Creator, (c) EZB Systems, Inc. I 15:12:47 Source File Implementation Identifier: ULTRAISO v9.5.3.2855 I 15:12:47 Source File File System(s): ISO9660; Joliet I 15:12:47 Destination Device: [0:0:0] HL-DT-ST DVD-RAM GH22NS30 2.00 (D:) (SATA) I 15:12:47 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) I 15:12:47 Destination Media Supported Write Speeds: 4x; 6x; 8x I 15:12:47 Destination Media Sectors: 4 173 824 I 15:12:47 Write Mode: DVD I 15:12:47 Write Type: DAO I 15:12:48 Write Speed: MAX I 15:12:48 DVD+R DL Reserve Track: No I 15:12:48 Link Size: Auto I 15:12:48 Lock Volume: Yes I 15:12:48 Test Mode: No I 15:12:48 OPC: No I 15:12:48 BURN-Proof: Enabled I 15:12:48 Write Speed Successfully Set! - Effective: 11 080 KB/s (8x) I 15:12:48 Book Type Setting: DVD-ROM I 15:12:48 Optimal L0 Data Zone Capacity: 1 755 552 I 15:12:48 Optimal L0 Data Zone Method: ECC Block Boundary I 15:12:48 Set L0 Data Zone Capacity Succeeded! I 15:12:48 Filling Buffer... (40 MB) I 15:12:49 Writing LeadIn... W 15:15:13 Failed to Write Sectors 0 - 31 - Reason: Unknown (Write Error) (ASC: 0x0C, ASCQ: 0x80) W 15:15:13 Retrying (1 of 20)... W 15:15:13 Retry Failed - Reason: No Seek Complete W 15:15:13 Retrying (2 of 20)... W 15:15:13 Retry Failed - Reason: Invalid Address For Write W 15:15:13 Retrying (3 of 20)... W 15:15:13 Retry Failed - Reason: Invalid Address For Write W 15:15:13 Retrying (4 of 20)... W 15:15:13 Retry Failed - Reason: Invalid Address For Write W 15:15:13 Retrying (5 of 20)... W 15:15:13 Retry Failed - Reason: Invalid Address For Write W 15:15:13 Retrying (6 of 20)... W 15:15:13 Retry Failed - Reason: Invalid Address For Write W 15:15:13 Retrying (7 of 20)... W 15:15:13 Retry Failed - Reason: Invalid Address For Write W 15:15:13 Retrying (8 of 20)... W 15:15:13 Retry Failed - Reason: Invalid Address For Write W 15:15:13 Retrying (9 of 20)... W 15:15:13 Retry Failed - Reason: Invalid Address For Write W 15:15:13 Retrying (10 of 20)... W 15:15:13 Retry Failed - Reason: Invalid Address For Write W 15:15:13 Retrying (11 of 20)... W 15:15:13 Retry Failed - Reason: Invalid Address For Write W 15:15:13 Retrying (12 of 20)... W 15:15:13 Retry Failed - Reason: Invalid Address For Write W 15:15:13 Retrying (13 of 20)... W 15:15:13 Retry Failed - Reason: Invalid Address For Write W 15:15:13 Retrying (14 of 20)... W 15:15:13 Retry Failed - Reason: Invalid Address For Write W 15:15:14 Retrying (15 of 20)... W 15:15:14 Retry Failed - Reason: Invalid Address For Write W 15:15:14 Retrying (16 of 20)... W 15:15:14 Retry Failed - Reason: Invalid Address For Write W 15:15:14 Retrying (17 of 20)... W 15:15:14 Retry Failed - Reason: Invalid Address For Write W 15:15:14 Retrying (18 of 20)... W 15:15:14 Retry Failed - Reason: Invalid Address For Write W 15:15:14 Retrying (19 of 20)... W 15:15:14 Retry Failed - Reason: Invalid Address For Write W 15:15:14 Retrying (20 of 20)... W 15:15:14 Retry Failed - Reason: Invalid Address For Write E 15:18:33 Failed to Write Sectors 0 - 31 - Reason: Unknown (Write Error) (ASC: 0x0C, ASCQ: 0x80) E 15:18:33 Next Writable Address: 0 I 15:18:33 Synchronising Cache... W 15:18:39 User opted to skip the 'Close Track/Session/Disc' functions. E 15:18:39 Failed to Write Image! E 15:18:39 Operation Failed! - Duration: 00:05:51 I 15:18:39 Average Write Rate: N/A - Maximum Write Rate: N/A Code: Devices ----------------------- HL-DT-ST DVD-RAM GH22NS30 2.00 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R dwuwarstwowa, DVD+R, DVD+RW, DVD+R dwuwarstwowa) [DVD-ROM, DVD-R sekwencyjna, DVD-R dwuwarstwowa sekwencyjna, DVD+R dwuwarstwowa, DVD-RAM, DVD-RW w trybie ograniczonego zastępowania, DVD-RW sekwencyjny, DVD+RW, DVD+R, DVD+R dwuwarstwowa, CD-ROM, CD-R, CD-RW] [Sesja naraz (SAO), TAO, RAW, SAO/R96P, SAO/R96R, Surowe/R16, Surowe/R96P, Surowe/R96R, Ograniczone zastępowanie., Przeskok warstwy] [%7] System ----------------------- K3b Version: 2.0.2 KDE Version: 4.8.4 (4.8.4) QT Version: 4.8.2 Kernel: 3.4.3-pf Used versions ----------------------- cdrecord: 3.1a07 cdrecord ----------------------- scsidev: '/dev/sr0' devname: '/dev/sr0' scsibus: -2 target: -2 lun: -2 Warning: Open by 'devname' is unintentional and not supported. Linux sg driver version: 3.5.27 SCSI buffer size: 64512 cdrecord: Warning: Cannot read drive buffer. cdrecord: Warning: The DMA speed test has been skipped. Cdrecord-ProDVD-ProBD-Clone 3.01a07 (x86_64-unknown-linux-gnu) Copyright (C) 1995-2012 Joerg Schilling TOC Type: 1 = CD-ROM Using libscg version 'schily-0.9'. Driveropts: 'burnfree' atapi: 1 Device type : Removable CD-ROM Version : 5 Response Format: 2 Capabilities : Vendor_info : 'HL-DT-ST' Identifikation : 'DVD-RAM GH22NS30' Revision : '2.00' Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM. Current: DVD+R/DL Profile: DVD-RAM Profile: DVD+R/DL (current) Profile: DVD+R Profile: DVD+RW Profile: DVD-R/DL layer jump recording Profile: DVD-R/DL sequential recording Profile: DVD-RW sequential recording Profile: DVD-RW restricted overwrite Profile: DVD-R sequential recording Profile: DVD-ROM Profile: CD-RW Profile: CD-R Profile: CD-ROM Profile: Removable Disk Using generic SCSI-3/mmc-3 DVD+R driver (mmc_dvdplusr). Driver flags : NO-CD DVD MMC-3 SWABAUDIO BURNFREE Supported modes: PACKET SAO LAYER_JUMP Drive buf size : 1409024 = 1376 KB FIFO size : 104857600 = 102400 KB Track 01: data 6857 MB Total size: 6857 MB = 3511088 sectors Current Secsize: 2048 Blocks total: 4173824 Blocks current: 4173824 Blocks remaining: 662736 Reducing transfer size from 64512 to 32768 bytes. Starting to write CD/DVD/BD at speed 8 in real SAO mode for single session. Last chance to quit, starting real write in 3 seconds. 2 seconds. 1 seconds. 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. Starting new track at sector: 0 Track 01: 0 of 6857 MB written. cdrecord: Błąd wejścia/wyjścia. write_g1: scsi sendcmd: no error CDB: 2A 00 00 00 00 00 00 00 10 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 03 00 00 00 00 0A 00 00 00 00 0C 80 00 00 Sense Key: 0x3 Medium Error, Segment 0 Sense Code: 0x0C Qual 0x80 (write error) [No matching qualifier] Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 145.010s timeout 200s cdrecord: A write error occured. cdrecord: Please properly read the error message above. write track data: error after 0 bytes Writing time: 150.023s Average write speed 34,6x. Fixating... Fixating time: 0.002s cdrecord: fifo had 3197 puts and 1 gets. cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%. cdrecord command: ----------------------- /usr/bin/cdrecord -v gracetime=2 dev=/dev/sr0 speed=8 -sao driveropts=burnfree fs=100m -data -tsize=3511088s - What's going on here? What do these errors mean? EDIT: cdrecord -media-info: Code: $ cdrecord dev=/dev/sr0 -media-info -v
Cdrecord-ProDVD-ProBD-Clone 3.01a07 (x86_64-unknown-linux-gnu) Copyright (C) 1995-2012 Joerg Schilling
TOC Type: 1 = CD-ROM
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
Using libscg version 'schily-0.9'.
SCSI buffer size: 64512
atapi: 1
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identifikation : 'DVD-RAM GH22NS30'
Revision : '2.00'
Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
Current: DVD+R/DL
Profile: DVD-RAM
Profile: DVD+R/DL (current)
Profile: DVD+R
Profile: DVD+RW
Profile: DVD-R/DL layer jump recording
Profile: DVD-R/DL sequential recording
Profile: DVD-RW sequential recording
Profile: DVD-RW restricted overwrite
Profile: DVD-R sequential recording
Profile: DVD-ROM
Profile: CD-RW
Profile: CD-R
Profile: CD-ROM
Profile: Removable Disk
Using generic SCSI-3/mmc-3 DVD+R driver (mmc_dvdplusr).
Driver flags : NO-CD DVD MMC-3 SWABAUDIO BURNFREE
Supported modes: PACKET SAO LAYER_JUMP
Drive buf size : 1409024 = 1376 KB
cdrecord: Warning: Cannot read drive buffer.
cdrecord: Warning: The DMA speed test has been skipped.
Current Secsize: 2048
book type: DVD+R/DL, Version (14.1)
disc size: 120mm (0)
maximum rate: Not specified (15)
number of layers:2
track path: Opposite Track Path (1)
layer type: Rewritable Area (2)
linear density: 0.293 µm/bit (1)
track density: 0.74 µm/track (0)
phys start: 196608 (0x30000)
phys end: 16580607
end layer 0: 2283519
bca: 0
phys size:... 16384000
layer break at: 2086912
Category/Version E1
Disk size 0F
Disk structure 32
Recoding density 10
Manufacturer: 'RICOHJPN'
Media type: 'D01'
Product revision 67
ADIP numbytes 64
Reference speed 37
Max speed 37
L0 init status: 0
L0 data areacap: 2086912
Jump intervalsz: 0
Jump LBA: 4294770688
copyr prot type: 0
region mgt info: 0
cpm: 0
cgms: 0
rzone size: 36
rzone number: 1
border number: 1
ljrs: 0
track mode: 7 copy: 0
damage: 0
reserved track: 0 blank: 1 incremental: 0 fp: 0
data mode: 1
lra valid: 0
nwa valid: 1
rzone start: 0
next wr addr: 0
free blocks: 4173824
blocking factor: 16
rzone size: 4173824
last recorded addr: 0
Capacity Blklen/Sparesz. Format-type Type
4173823 2048 0x00 Unformated or Blank Media
Mounted media class: DVD
Mounted media type: DVD+R/DL
Disk Is not erasable
data type: standard
disk status: empty
session status: empty
BG format status: none
first track: 1
number of sessions: 1
first track in last sess: 1
last track in last sess: 1
Disk Is unrestricted
Disk type: DVD, HD-DVD or BD
Track Sess Type Start Addr End Addr Size
==============================================
1 1 Blank 0 4173823 4173824 -1
Next writable address: 0
Remaining writable size: 4173824
|
|  |
Today | |
| Register to remove me Join Date: Today Location: Myce HQ
Posts: Zillions
| |
|
05-07-2012
| #2 |
| Senior Administrator & Reviewer  Join Date: Nov 2005 Location: Tabby Towers, West of England
Posts: 33,774
| Welcome to the forum  Could be that the new firmware has issues with that particular mediacode (RICOHJPN-D01-67) - the only drive I own personally that'll burn those successfully is a Samsung 223F, and then at 6x, not the max 8x. There are a couple of things you could try until other members chime in with their suggestions: * Lower the burn speed to 6x or 4x * Try a different brand of disc if you have any spare Having virtual drive/emulation software installed can often screw things up a bit burning-wise, but if you had UltraISO or whatever installed before then I doubt that's the culprit. However a last ditch option could be to uninstall it (and its associated drivers), and see if that fixes things. That often causes more issues than it fixes, so I'd only do that is nothing else helped.
__________________ Current drives: Samsung SE-S084C (TS02) + Samsung SH-S223F (SB03 RPC1 + other goodies) + TSST (Samsung) TS-H653F (DW10) + Samsung SH-S203N (SB02 RPC1 + other goodies) + Optiarc AD-5170S (1.12) + Litey LH-20A1H (LL0D) + Samsung SH-S182D (SB06 RPC1) x2 + LG E10N (JE07) + BenQ DW1650 (BCDC) + BenQ DW1640@164B (BEFB) + LG 4167B (DL13 TDB) + NEC ND-4551A (1.Z2) + LG GCE-8520B (1.00) + LiteOn SOHR-5239S (2S0B) Retired: LiteOn LDW-851@SOHW-832 + LiteOn SOHW-1693S + LG 4163B + Pioneer DVR-115D My Review PCs How to delete your upper and lower filters : How to check/enable DMA by Womble Click here to join MyCE.com and be part of our friendly community!  Smile...people will wonder what you're up to  |
|
| |
|
05-07-2012
| #3 | |
| New Member Join Date: Jul 2012
Posts: 6
| I tried All the write speeds (8, 6 and 4) and it's likely not a software issue since the problem occurs both on Windows and Linux. I don't have any other DLs on me currently, so I can't verify if it's only this one type of disc. I burned a DVD+RW succesfully though. Thanks for the answer anyway. Quote:
I've also succeeded in writing them with my laptop's "TSSCORP" burner, I don't have the exact model currently though. | |
|
| |
|
Today | |
| Always the best offers Join Date: Today Location: Myce HQ
Posts: Zillions
| |
|
09-07-2012
| #4 |
| MyCE Resident  Join Date: Aug 2004 Location: @FX labs .de ...playing LLAMATRON :-]
Posts: 30,613
| LOWest grade media, so no surprise. I wonder if they are even good enough for a frisbee session.
__________________ Enable DMA with micrAp$0ft Enable DMA free at your will busTRACE => Upper/Lower Filters Util DevCon ***HOW TO ... Delete the Upper & Lower Filters!***  If you expect help then please use the powerful SEARCH. Try ThreatFireI am looking for DVD-R for Authoring & HD DVD media. Please PM me if you can help me.  Vamos Tribbles! V-a-m-o-s!!  |
|
| |
|
09-07-2012
| #5 |
| New Member Join Date: Jul 2012
Posts: 6
| They're also the CHEAPest And as I said, they work great with all the other drives in my home AND they can be burned fine with older firmware on this particular one. |
|
| |
|
10-07-2012
| #6 |
| MyCE Resident Join Date: Aug 2004 Location: @FX labs .de ...playing LLAMATRON :-]
Posts: 30,613
| And, what does that mean? You can even burn the cheapeast crappo media without issues, but that doesnt mean it was a decent burn at all.....
__________________ Enable DMA with micrAp$0ft Enable DMA free at your will busTRACE => Upper/Lower Filters Util DevCon ***HOW TO ... Delete the Upper & Lower Filters!*** If you expect help then please use the powerful SEARCH. Try ThreatFireI am looking for DVD-R for Authoring & HD DVD media. Please PM me if you can help me. Vamos Tribbles! V-a-m-o-s!! |
|
| |
|
10-07-2012
| #7 |
| New Member Join Date: Jul 2012
Posts: 6
| If there are no issues with it, then I call it a decent burn |
|
| |
|
11-07-2012
| #8 |
| MyCE Resident Join Date: Aug 2004 Location: @FX labs .de ...playing LLAMATRON :-]
Posts: 30,613
| You'll learn it the hard way later on.
__________________ Enable DMA with micrAp$0ft Enable DMA free at your will busTRACE => Upper/Lower Filters Util DevCon ***HOW TO ... Delete the Upper & Lower Filters!*** If you expect help then please use the powerful SEARCH. Try ThreatFireI am looking for DVD-R for Authoring & HD DVD media. Please PM me if you can help me. Vamos Tribbles! V-a-m-o-s!! |
|
| |
|
11-07-2012
| #9 |
| New Member Join Date: Jul 2012
Posts: 6
| Do people often tell you you sound like an elitist prick? |
|
| |
|
11-07-2012
| #10 |
| Senior Moderator  Join Date: Apr 2005 Location: AL, USA
Posts: 5,989
| There's a reason for that, in this specific case. The Omega brand, if it's the same one we've seen around the forum before, isn't above using low-grade media. They've used fake Taiyo Yuden, fake Verbatim/MCC, and fake Ricoh...and with fake Ricoh DL media, burns are rarely pretty. They also tend to cause problems such as what you see here. If LG did its best to improve the write quality of REAL Ricoh DL media with a firmware update, they are understandably going to have no way of supporting the fake Ricoh, especially with manufacturing processes and quality varying so wildly. So when _chef_ says you'll learn it the hard way, it's an actual warning. Don't trust this stuff. We know it's cheap, and we know that may be appealing, but if it has to be done, try to go for the good stuff; it reduces headaches both now and in the long run, especially when you're using a drive from a manufacturer that tunes its hardware for quality media. |
|
| |
|
11-07-2012
| #11 |
| New Member Join Date: Jul 2012
Posts: 6
| Thanks for the warning and a good explanation. I didn't know there are fake DVD-Rs. To be honest I'm actually having less trouble with them than with the 3 times more expensive EMTEC discs I used to buy. As for this particular issue I solved it by using a laser cleaning disc. Yes, I know. |
|
| |
|
12-07-2012
| #12 |
| Senior Moderator Join Date: Apr 2005 Location: AL, USA
Posts: 5,989
|  Kudos to you for resolving to solve your issue. Sometimes it's the simple things that solve the actual problem. You have good ideas; we could use more heads like yours around the forums. |
|
| |
|
| Thread Tools | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| HL-DT-ST DVD-RAM GH22NS30 | Dr. Who | LG Writer | 8 | 23-08-2009 17:02 |
| Please Help: New GH22NS30 won't burn Taiyo DVD+Rs | grante | LG Writer | 5 | 04-11-2008 05:00 |
| Please Help: DVD Upgrade Firmware upgrade + Burner Problem | bleh*** | CD, DVD and Blu-ray Writers | 1 | 26-08-2008 03:00 |
| Downloaded 2.9* upgrade to DVDFab and now can no longer burn DVD??? | hilleyja | DVDFab / DVD Region+CSS Free | 5 | 07-02-2007 22:39 |
| My DVD-R no longer burning on 2.18 firmware - HELP | merley | NEC / Optiarc Writer | 1 | 29-12-2004 14:21 |
