New AnyDVD, CloneDVD, CloneCD, Virtual CloneDrive

Hello guest,
default
To benefit from all extra features you need to log in or sign up.
AnyDVD Discuss, New AnyDVD, CloneDVD, CloneCD, Virtual CloneDrive at Movie copy software forum; Quote:

olmari's Avatar
olmari (CD Freaks Junior Member)
Posts: 94
Posted: 15-04-2005
Quote:
Originally Posted by spiderman_jab
sorry i have a dumb question here. what is the difference between 32 bit and 64 bit windows xp?
Well, Very roughly said, 64-bit windows is windows compliled with 64-bit compiler, which makes 64-bit code. As there are 64-bit CPUs (and motherboards, of course, to put 64-bit cpu to), to run full speed they need 64-bit programmed programs. Altough they can run 32-bit programs too (including windows 32-bit), but it is "32-bit less efficient" in manner of speaking.

Quote:
Originally Posted by spiderman_jab
also the versions of anydvd and clonedvd are working fine, do i need to upgrade? im afraid if i do i might run into problems...
There is no immediate need to upgrade working programs, altough they do have fixed some bugs in them too. I personally always use newest, but it's just me, allways the newest
__________________
Member of TACKtech
default_avatar
Today (MyCE Staff)
Posts: 15,596
Olli's Avatar
Olli (Original author of CloneCD and CloneDVD Author)
Posts: 2,152
Posted: 15-04-2005
Quote:
Originally Posted by Olli
Which version of CloneDVD was this?
Eh, I meant "which version of CloneCD was this"?
__________________
Note: All opinions expressed in this post are my personal opinion and do not represent Elaborate Bytes AG or anyone else.
default_avatar
bitye (New on Forum)
Posts: 2
Posted: 15-04-2005
Quote:
Originally Posted by SlySoft
Together with Elaborate Bytes AG we have created new versions of all our products. These are "beta" versions, but I don't expect any problems. If you encounter problems, please contact support(at)slysoft.com, bugs(at)elby.ch or post them here.
I am using final Windows XP x64 Edition, and get this error, when try to install VirtualCloneDrive 5.1:
olmari's Avatar
olmari (CD Freaks Junior Member)
Posts: 94
Posted: 15-04-2005
Quote:
Originally Posted by bitye
I am using final Windows XP x64 Edition, and get this error, when try to install VirtualCloneDrive 5.1:
Changelog snippet from virtual CloneDrive AND beginning of this thread:

Virtual CloneDrive 5.1.0.0: 2005 04 12
- New: Refuses to install on 64 bit Windows

That is because it is not compatible with 64-bit windows as it need to to be completely rewritten to work in 64-bit windows, which is also said in this very thread...

You know, search is power, or even reading the thread before asking already answered question in same thread... Besides what do you mean with SHARE forder and some suspicious files on that folder you have there?
__________________
Member of TACKtech
default_avatar
bitye (New on Forum)
Posts: 2
Posted: 15-04-2005
Sorry, I am a litle tired!
default_avatar
hajj_3 (CD Freaks Member)
Posts: 179
Posted: 15-04-2005
NERO 6.0.0.12 came out today, maybe the nerocheck will be fixed now for us 64bit users and we might not get the error message, has anyone tried it yet?
Olli's Avatar
Olli (Original author of CloneCD and CloneDVD Author)
Posts: 2,152
Posted: 15-04-2005
Quote:
Originally Posted by hajj_3
NERO 6.0.0.12 came out today, maybe the nerocheck will be fixed now for us 64bit users and we might not get the error message, has anyone tried it yet?
No, but the release versions of CloneCD/ CloneDVD/AnyDVD will have a workaround for the Nero problem. You shouldn't have to care much.
__________________
Note: All opinions expressed in this post are my personal opinion and do not represent Elaborate Bytes AG or anyone else.
default_avatar
syrinx (New on Forum)
Posts: 13
Posted: 16-04-2005
Quote:
Originally Posted by Olli
Which version of CloneDVD was this?
Is this on Windows 64? If yes, the same Workaround applies like with NeroCheck.exe (read this thread).
I'm running the regular 32 bit version of WinXP SP2.

I first tried the beta CloneDVD 2.8.0.0. After getting the above error, I immediately uninstalled NERO and still had the problem. I then tried the commercially available version of CloneDVD and still got the error.

After searching high and low on the internet and not finding anything that helped, I decided to remove both CloneCD and CloneDVD, then reinstalled CloneDVD. That did the trick. I got home late tonight and don't feel like fooling with things, so I'll reinstall CloneCD tomorrow and see if the problem pops up again.
XxJakeBluesxX's Avatar
XxJakeBluesxX (New on Forum)
Posts: 1
Posted: 16-04-2005
Quote:
Originally Posted by kamikazee
I've found a simpler solution that works well, at least here is does. I entered msconfig and unticked NeroCheck, it seems to work also.
I had a problem that after the installation from CloneCD 5.2.0.0. No CD-R Media was found from Nero Disk-Info or the RealPlayer CD-Burning Engine.

After your solution it works very well...

Edit:
Now it don't works again.

After deinstallation from Version 5.2.0.0 and reinstalling Version 5.1.0.0 it works...

I'm using WindowsXP Pro SP2 32bit
__________________
Ciao
XxJakeBluesxX
Last edited by XxJakeBluesxX; 16-04-2005 at 12:55.
Olli's Avatar
Olli (Original author of CloneCD and CloneDVD Author)
Posts: 2,152
Posted: 16-04-2005
Quote:
Originally Posted by syrinx
I'm running the regular 32 bit version of WinXP SP2.

I first tried the beta CloneDVD 2.8.0.0. After getting the above error, I immediately uninstalled NERO and still had the problem. I then tried the commercially available version of CloneDVD and still got the error.

After searching high and low on the internet and not finding anything that helped, I decided to remove both CloneCD and CloneDVD, then reinstalled CloneDVD. That did the trick. I got home late tonight and don't feel like fooling with things, so I'll reinstall CloneCD tomorrow and see if the problem pops up again.
Which version of CloneCD were you using (which issued the "ElbyCheck" warning)?
__________________
Note: All opinions expressed in this post are my personal opinion and do not represent Elaborate Bytes AG or anyone else.
default_avatar
voxsmart (CD Freaks Member)
Posts: 168
Posted: 16-04-2005
arniebear, I dare say you will get an e mail soon, this is a beta release. read James's (Slysoft) post at the top.
default_avatar
marlowe (CD Freaks Member)
Posts: 178
Posted: 16-04-2005
Quote:
Originally Posted by Olli
No, but the release versions of CloneCD/ CloneDVD/AnyDVD will have a workaround for the Nero problem. You shouldn't have to care much.
Dear Olli and Elaborate Bytes AG:
Maybe you can consider to development "MakeDisc"
I am really tired about Nero(only personal point)
I am still looking a software to replace Nero...
Kyliefan001's Avatar
Kyliefan001 (CD Freaks Member)
Posts: 153
Posted: 17-04-2005
Are there any known problems with Anydvd 5 and DVDShrink?

Thanks!
default_avatar
boogeyman (New on Forum)
Posts: 22
Posted: 17-04-2005
Quote:
Originally Posted by journbon
Hey guys
A newbie here. Just tried using the new 64 bit versions of clone dvd and anydvd. Everything is fine until it is time to burn the dvd and then my entire computer freezes up. I am using WindowsXP 64 bit. Every was fine with the older versions. Any help would be greatly appreciated.Thanks

I am having the same problem. Have an Athlon 64, but running 32 bit windows XP SP2. The writing slows way down. Have posted on another thread, but haven't heard anything, sorry about repeating.
default_avatar
FreqNasty (Banned)
Posts: 624
Posted: 19-04-2005
Ollie,

When I right clicked a dvd drive I used to get an option in the windows explorer context menu to eject or close the tray, but just recently I noticed there is no 'close' option even when the tray is open, only eject. Is this 'close' tray feature anything to do with Slysoft software? I'm not sure what I may have done to make it go missing from the context menu.
SamuriHL's Avatar
SamuriHL (CDFreaks Resident)
Posts: 2,876
Posted: 19-04-2005
A close option in explorer? Fascinating. Something else you installed must have put it there because by default Windows does not have such an animal. AnyDVD most certainly didn't put it there afaik.
Olli's Avatar
Olli (Original author of CloneCD and CloneDVD Author)
Posts: 2,152
Posted: 19-04-2005
Quote:
Originally Posted by FreqNasty
Ollie,

When I right clicked a dvd drive I used to get an option in the windows explorer context menu to eject or close the tray, but just recently I noticed there is no 'close' option even when the tray is open, only eject. Is this 'close' tray feature anything to do with Slysoft software? I'm not sure what I may have done to make it go missing from the context menu.
Yes, "Close Tray" is part of Elaborate Bytes' Virtual CloneDrive. An extremely cool and helpful feature.
__________________
Note: All opinions expressed in this post are my personal opinion and do not represent Elaborate Bytes AG or anyone else.
Olli's Avatar
Olli (Original author of CloneCD and CloneDVD Author)
Posts: 2,152
Posted: 19-04-2005
Quote:
Originally Posted by boogeyman
I am having the same problem. Have an Athlon 64, but running 32 bit windows XP SP2. The writing slows way down. Have posted on another thread, but haven't heard anything, sorry about repeating.
Are you using any 3rd party IDE drivers? (Assuming your drive is internal).
__________________
Note: All opinions expressed in this post are my personal opinion and do not represent Elaborate Bytes AG or anyone else.
SamuriHL's Avatar
SamuriHL (CDFreaks Resident)
Posts: 2,876
Posted: 19-04-2005
Quote:
Originally Posted by Olli
Yes, "Close Tray" is part of Elaborate Bytes' Virtual CloneDrive. An extremely cool and helpful feature.
Neat. I don't think I ever noticed that before. Extremely kuel indeed!
default_avatar
dekarguy (New on Forum)
Posts: 10
Posted: 14-05-2005
Just installed CloneCD 5.2.1.1 on Windows XP X64 and my drives, CD-ROM and CD-RW are not being recognized

Could this be a problem with me having Nero installed also, or maybe something else

Edit: Nevermind, fixed my problem. I installed CloneCD by itself and it wouldn't work, but after I installed AnyDVD and CloneDVD, everything was recognized in CloneCD, maybe CloneCD is missing a file?
Olli's Avatar
Olli (Original author of CloneCD and CloneDVD Author)
Posts: 2,152
Posted: 14-05-2005
Quote:
Originally Posted by dekarguy
Just installed CloneCD 5.2.1.1 on Windows XP X64 and my drives, CD-ROM and CD-RW are not being recognized

Could this be a problem with me having Nero installed also, or maybe something else

Edit: Nevermind, fixed my problem. I installed CloneCD by itself and it wouldn't work, but after I installed AnyDVD and CloneDVD, everything was recognized in CloneCD, maybe CloneCD is missing a file?
The forum "Search" function is a wonderful thing
http://club.cdfreaks.com/showpost.ph...3&postcount=13
__________________
Note: All opinions expressed in this post are my personal opinion and do not represent Elaborate Bytes AG or anyone else.
There's more to MyCE.com

Listen up, we've got more. Product information on 102,541 products. Our experts have written 521 articles. We've gathered 16,068 news items for you to always keep updated.

Active Commenters

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Similar Threads

People who found this also searched for

  • cant run cirtual clone drive on 2003 windows
  • clone cd a 64 bit
  • clonecd 64 bit
  • download slysoft virtual clone drive
  • elbycdfl.sys download
  • elbycdfl.sys downloads
  • elbydelay.sys
  • elbydelay.sys download
  • elbydelay.sys driver
  • elbydelay.sys for download
  • elbydelay.sys ftp
  • installer elbydelay
  • syswow elby
  • upgrade clonecd
  • virtual clone cd driver instal driver fail
  • virtual clone drive 64 bit
  • virtual clone drive server 2003
  • virtual clone drive with xp 64 bit
  • virtual clone driver server 2003
  • virtual clone dvd 64bit
  • virtual clonecd 64 bits
  • virtual clonedrive 64bit
  • virtual clonedvd supported images
  • virtual club 64 bit
  • virtualclonedrive 64
All times are GMT +2. The time now is 10:27.
Top