AnyDVD ver. 6.0.6.1 will not run

AnyDVD Discuss, AnyDVD ver. 6.0.6.1 will not run at Movie copy software forum; I upgraded from version 6.0.5.1 to 6.0.6.1 but AnyDVD will not run. The message appearing is "Trial period has Expired". I bought the product about 2 months ago and have upgraded successfully until this latest version. I have my "Key.AnyDVD" file which I ran again and did a few PC

Old Posted: 16-09-2006
default_avatar
netcomm (New on Forum)
Posts: 4
  • Find More Posts by netcomm
I upgraded from version 6.0.5.1 to 6.0.6.1 but AnyDVD will not run.
The message appearing is "Trial period has Expired".

I bought the product about 2 months ago and have upgraded successfully until this latest version. I have my "Key.AnyDVD" file which I ran again and did a few PC restarts but to no avail.

If I uninstall the version 6.0.6.1 and reinstall the 6.0.5.1 version it works fine.
Anyone any thoughts on this or have similar problems with the latest version.
default_avatar
Today (MyCE Staff)
Posts: 15,596
Old Posted: 16-09-2006
bjkg's Avatar
bjkg (CDFreaks Resident)
Posts: 3,546
  • Find More Posts by bjkg
@ netcomm,

Welcome to the Forum.

It appears that possibly your Registration Key has become “Blacklisted”.

Did you purchase AnyDVD from SlySoft (http://www.slysoft.com)? If you purchased your Registration Key from SlySoft (http://www.slysoft.com) suggest contacting SlySoft (support(at)slysoft.com (replace (at) with @) for assistance.

Best Regards,
bjkg
Old Posted: 16-09-2006
default_avatar
netcomm (New on Forum)
Posts: 4
  • Find More Posts by netcomm
I purchased directly from Slysoft. I've also sent query to Slysoft support but it could be up to 48 hours before I get a reply.

When you say reg key could be 'blacklisted' - for what reason?.

As I've said if I remove 6.0.6.1 and reinstall the 6.0.5.1 version there is no problem and I don't have to run the reg key file again
Old Posted: 16-09-2006
default_avatar
tqhoang (CD Freaks Senior Member)
Posts: 447
  • Find More Posts by tqhoang
Don't do an upgrade to the latest version. Uninstall the previous version, reboot and then install the latest. I believe this has worked for others in your situation.
__________________

M$ Windows XP SP3 & Vista SP1
NEC ND-2100AD@2510A Fw 2.0A-bt
NEC ND-6750A Fw 2.42-bt
NEC AD-7170A Fw 1.05-bt
NEC AD-7170S Fw 1.03-bt
NEC AD-7201S Fw 1.09-bt
NEC AD-7590A Fw 1.05-bt
Plextor Premium TLA#0005 Fw 1.07
Plextor PX-716UF TLA#0306 Fw 1.11
Old Posted: 16-09-2006
default_avatar
netcomm (New on Forum)
Posts: 4
  • Find More Posts by netcomm
I had tried a clean uninstall/re-install before and restarted the PC at each stage but to no avail.

However the problem is solved now.

It turned to be a Firewall problem. I have Zonealarm Security Suite and for some reason AnyDVd 6.0.6.1 refused to work with the Zonealarm program settings that all previous versions of AnyDVD had.

What had put me off was the 'Your Trial Period has Expired' message that occurs with those Zonealarm Setting. (reinstalling 6.0.5.1 with those same Zonealarm settings lets AnyDVD works fine)
I've now changed the settings in Zonealarm which allows ver 6.0.6.1 to work correctly.

Thanks for all suggestions
Old Posted: 16-09-2006
reasonsnotrules's Avatar
reasonsnotrules (CD Freaks Guru)
Posts: 5,328
  • Find More Posts by reasonsnotrules
for future reference for anyone who does a search and has a similar problem could you please state the exact setting changes you made?

This could prove very helpful for other forum members.
__________________
seriously, DON'T PM me tech questions. depending on my mood you will be ignored or receive completely meaningless answers. bonus spam if you leave your email address...
Old Posted: 17-09-2006
default_avatar
zaq (MyCE Resident)
Posts: 1,556
  • Find More Posts by zaq
hmmmmmmmmmmm
Old Posted: 17-09-2006
Dr. Who's Avatar
Dr. Who (DVD neXt COPY Support)
Posts: 4,622
  • Find More Posts by Dr. Who
Quote:
Originally Posted by reasonsnotrules
for future reference for anyone who does a search and has a similar problem could you please state the exact setting changes you made?

This could prove very helpful for other forum members.

Reasonsnotrules has spoken "Case Closed" LOL
__________________
To get the latest DVD neXt COPY update click HERE.
Please use the forum to get technical help by posting HERE

My Current System : Gigabyte GA-P35-S3G ATX Intel Motherboard, Intel E6600 Core 2 Duo 2.66 ghtz, 4 gigs of OCZ RAM (PC-6400), GeForce 8500GT 512MB 128-bit GDDR2 PCI Express x16 HDCP Ready SLI Supported, HL-DT-ST BD-REGGW-H20L YL05 Firmware, EIDE 150 gig Western Digital HDD, EIDE 120 gig Segate HDD, Pioneer DVR-215D 1.18 Firmware booktype & Region Free Patch , Samsung 203N SB02 Firmware booktype & Region Free Patch, LG GH22NS30 1.03 Firmware Region Free Patch, Samsung 223F SB03 Firmware booktype & Region Free Patch, Antec True Power 650 watts Power Supply, Thermaltake Armor Case, Sound Blaster X-FI Gamer Edition 7.1 surround sound, Windows 7 Ultimate 64 bit Edition
Old Posted: 17-09-2006
default_avatar
zaq (MyCE Resident)
Posts: 1,556
  • Find More Posts by zaq
I have ZA sec suite also and installed the new AD update and my license did not terminate or expire
Poor Ngyen
we knew him well
Long live Brian
Old Posted: 17-09-2006
alan1476's Avatar
alan1476 (Senior Moderator and Software Editor)
Posts: 15,291
  • Find More Posts by alan1476
Quote:
Originally Posted by zaq
I have ZA sec suite also and installed the new AD update and my license did not terminate or expire
Poor Ngyen
we knew him well
Long live Brian
I only had that problem once and it was because my computer clock went on the fritz. As soon as I set the clock to the right date everything was okay again.
__________________
I do not provide technical support over E-mail or Private Message Please post your questions on the Forum
Sign up to CD Freaks
Register Here
FORUM RULES
Need some help ? Please use our search function first
Join us on the CDFreaks Folding@Home Team! Read more here
Get WinDWFlash HERE
My Computer specs are HERE
Old Posted: 17-09-2006
default_avatar
netcomm (New on Forum)
Posts: 4
  • Find More Posts by netcomm
In Zonealarm Program Control, Trust Level is set as ‘Restricted’.
This worked for all previous versions of AnyDVD up to 6.0.5.1.

With those same Zonealarm settings version 6.0.6.1 will not run and I get the message ‘Your trial period has expired’

When I Change the Trust Level to Trusted then AnyDVD 6.0.6.1 works OK.

Restricted access means the Program can perform trusted-level actions but cannot perform suspicious actions.

Trusted access means Trusted Programs can perform suspicious actions without seeking permission, but unknown programs must ask for permission.
Old Posted: 17-09-2006
default_avatar
linx05 (CDFreaks Resident)
Posts: 700
  • Find More Posts by linx05
This is probably a crack prevention method. Then again, what would happen if you ran AnyDVD on a computer with no net access?

There is probably something else in play with ZA and AnyDVD.
Old Posted: 17-09-2006
Nemesys's Avatar
Nemesys (MyCE Resident)
Posts: 1,241
  • Find More Posts by Nemesys
Quote:
Originally Posted by linx05
This is probably a crack prevention method. Then again, what would happen if you ran AnyDVD on a computer with no net access?

There is probably something else in play with ZA and AnyDVD.
I agree, it sounds silly that a program would be coded not to run if it cannot gain Internet access.

Reportedly, AnyDVD only requires Internet for update checks, and the user should always have the option wheteher or not to permit automatic updates.
__________________
Case: Cooler Master HAF 932 Full Tower Motherboard: ABIT IP35 Pro CPU: Intel Core 2 Duo E8400 3.0GHz @ 4.0GHz (Tuniq Tower 120 CPU Cooling) RAM: 4GB OCZ Platinum XTC Video Card: SAPPHIRE Radeon HD 4870 512MB Sound Card: Creative X-Fi Xtreme Audio Monitor: Hanns-G HG-281DJB (28” LCD) Audio System: MASSIVE NIC: Intel PRO 1000
DVD-RAM: Samsung SH-S203B SB04
DVD-RAM: Lite-On LH-20A1L BL06
Hard Drive (Internal Storage): Seagate Barracuda 1TB SATA II File Storage
Hard Drive (Removables): (4) LIAN-LI SATA Mobile Racks
Drive #1. Seagate Barracuda 320GB SATA II WIN XP Professional
Drive #2. Seagate Barracuda 320GB SATA II WIN Vista Ultimate
Drive #3. Seagate Barracuda 250GB SATA II WIN 7 Home Premium
Drive #4. Seagate Barracuda 80GB SATA II Testing


http://valid.x86-secret.com/show_oc.php?id=364264
Old Posted: 17-09-2006
samlar's Avatar
samlar (MyCE Resident)
Posts: 2,622
  • Find More Posts by samlar
I have zone alarm and anydvd worked fine for me and I have zone alarm set up to block anydvd and all other programs from the internet. I do not like programs calling home never know what they might send. I just update anydvd when I get an email or I see here there is an update. I also have the update for anydvd and clonedvd turn off.
Old Posted: 17-09-2006
default_avatar
zaq (MyCE Resident)
Posts: 1,556
  • Find More Posts by zaq
The ZA sec suite has a function to actually prevent execution of a given program in addition to preventing internet access
ZA intenet access prevention of AD does not cause any problem,
however when ZA is used to prevent AD execution, AD is unable to do a key check and it appears as though it is unregistered ie the 21 day game over message occurs
if AD is again permitted to execute the error goes away, internet acces can still be denied.
This is not a bug : anytime a program is prevented from starting up by another program some error message is going to ensue
Bottom line
with ZA the trust level has to be at least 2 bars for all SS programs (not restricted ie restriction =1 bar, nor kill level)
intenet acces can be either enabled or disabled

this ZA feature is good for turning off nuisance progs

however in my setup the new AD update did not change my trust levels
Old Posted: 18-09-2006
Nemesys's Avatar
Nemesys (MyCE Resident)
Posts: 1,241
  • Find More Posts by Nemesys
@zag

Nice synopsis. Thanks for shedding some light on the issue.

I despise software most firewalls. They create more issues than they are worth.
__________________
Case: Cooler Master HAF 932 Full Tower Motherboard: ABIT IP35 Pro CPU: Intel Core 2 Duo E8400 3.0GHz @ 4.0GHz (Tuniq Tower 120 CPU Cooling) RAM: 4GB OCZ Platinum XTC Video Card: SAPPHIRE Radeon HD 4870 512MB Sound Card: Creative X-Fi Xtreme Audio Monitor: Hanns-G HG-281DJB (28” LCD) Audio System: MASSIVE NIC: Intel PRO 1000
DVD-RAM: Samsung SH-S203B SB04
DVD-RAM: Lite-On LH-20A1L BL06
Hard Drive (Internal Storage): Seagate Barracuda 1TB SATA II File Storage
Hard Drive (Removables): (4) LIAN-LI SATA Mobile Racks
Drive #1. Seagate Barracuda 320GB SATA II WIN XP Professional
Drive #2. Seagate Barracuda 320GB SATA II WIN Vista Ultimate
Drive #3. Seagate Barracuda 250GB SATA II WIN 7 Home Premium
Drive #4. Seagate Barracuda 80GB SATA II Testing


http://valid.x86-secret.com/show_oc.php?id=364264
Old Posted: 18-09-2006
Dr. Who's Avatar
Dr. Who (DVD neXt COPY Support)
Posts: 4,622
  • Find More Posts by Dr. Who
System mechanic pro is another issue if you have these probems too well on the update getting the trial ordeal and if you just purchased and try to apply the reg key it'll be a problem too. Both are great programs I won't deny that but can cause issues as well. Just a little info to keep in mind.
__________________
To get the latest DVD neXt COPY update click HERE.
Please use the forum to get technical help by posting HERE

My Current System : Gigabyte GA-P35-S3G ATX Intel Motherboard, Intel E6600 Core 2 Duo 2.66 ghtz, 4 gigs of OCZ RAM (PC-6400), GeForce 8500GT 512MB 128-bit GDDR2 PCI Express x16 HDCP Ready SLI Supported, HL-DT-ST BD-REGGW-H20L YL05 Firmware, EIDE 150 gig Western Digital HDD, EIDE 120 gig Segate HDD, Pioneer DVR-215D 1.18 Firmware booktype & Region Free Patch , Samsung 203N SB02 Firmware booktype & Region Free Patch, LG GH22NS30 1.03 Firmware Region Free Patch, Samsung 223F SB03 Firmware booktype & Region Free Patch, Antec True Power 650 watts Power Supply, Thermaltake Armor Case, Sound Blaster X-FI Gamer Edition 7.1 surround sound, Windows 7 Ultimate 64 bit Edition
Old Posted: 18-09-2006
reasonsnotrules's Avatar
reasonsnotrules (CD Freaks Guru)
Posts: 5,328
  • Find More Posts by reasonsnotrules
awesome. this is definitely an informative thread. good to know for others that have the same problem with the same program.

glad you got everything worked out and thank you for coming back to share the information
__________________
seriously, DON'T PM me tech questions. depending on my mood you will be ignored or receive completely meaningless answers. bonus spam if you leave your email address...
Old Posted: 18-09-2006
default_avatar
BeardedKirklander (CD Freak)
Posts: 2,949
  • Find More Posts by BeardedKirklander
I have to say, Zone Alarm seems to be a bit less friendly than it used to be back in the day. I've had to uninstall it a few times to get certain things to work, but once they are all setup and working, I can reinstall Zone Alarm and things seem to work well for the most part.
Old Posted: 18-09-2006
default_avatar
Tru (CDFreaks Resident)
Posts: 1,494
  • Find More Posts by Tru
Every tool which prohibts AnyDVD to access the registry (another example: TeaTimer from the SpyBot - Search and Destroy package) will cause such problems.
AnyDVD must have at least read access to the HKEY_CURRENT_MACHINE branch, otherwise it can't check the registration.
Old Posted: 18-09-2006
samlar's Avatar
samlar (MyCE Resident)
Posts: 2,622
  • Find More Posts by samlar
I have it blocked from getting to the trusted and internet zone and have not had any problem with it. I went to zone alarm and set it for restricted and then it came up with the trial period had expired. I went back and just placed a ? mark in the trust level and X in the acess and server levels in zone alarm and it work fine. Never used the restricted in the trust level for anything do not know why I would block programs this way I just block them from my trusted zone and the internet.
Old Posted: 19-09-2006
default_avatar
zaq (MyCE Resident)
Posts: 1,556
  • Find More Posts by zaq
Quote:
Originally Posted by samlar
I have it blocked from getting to the trusted and internet zone and have not had any problem with it. I went to zone alarm and set it for restricted and then it came up with the trial period had expired. I went back and just placed a ? mark in the trust level and X in the acess and server levels in zone alarm and it work fine. Never used the restricted in the trust level for anything do not know why I would block programs this way I just block them from my trusted zone and the internet.
It is to prevent trojans and rootkits from running ???
Old Posted: 19-09-2006
samlar's Avatar
samlar (MyCE Resident)
Posts: 2,622
  • Find More Posts by samlar
I always leve the trusted leve at ? and block them for the internet so do not see how trojans could get to the internet anyway. I do not even let window explorer or any other microsoft program get to the interent and use firefox.
Old Posted: 19-09-2006
default_avatar
zaq (MyCE Resident)
Posts: 1,556
  • Find More Posts by zaq
Quote:
Originally Posted by samlar
I always leve the trusted leve at ? and block them for the internet so do not see how trojans could get to the internet anyway. I do not even let window explorer or any other microsoft program get to the interent and use firefox.
I was being facetious regarding this property of ZA
ie restricting programs and trojans from running
ie you get a trojan and then keep it from running as opposed to removing it
There's more to MyCE.com

Listen up, we've got more. Product information on 107,830 products. Our experts have written 540 articles. We've gathered 16,486 news items for you to always keep updated.

Hello guest,
default
To benefit from all extra features you need to log in or sign up.

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Similar Threads

People who found this also searched for

  • windows 7 bt3546
  • any dvd will not run
  • anydvd 6.0.6.1
  • anydvd home server
  • anydvd in whs
  • anydvd internet check
  • anydvd key reg file trial period has expired
  • anydvd on whs
  • anydvd remove your trial period has expired
  • anydvd trial expiration prevention
  • anydvd voor whs
  • anydvd whs install
  • anydvd whs not working
  • anydvd windows 7 will not run
  • anydvd windows 7 won't run
  • anydvd windows home server
  • anydvd wont start windows home server
  • anydvd zone alarm
  • anydvd zonealarm
  • anydvd.chk expired appearing
  • block anydvd from internet
  • block anydvd internet
  • block anydvd internet access
  • block anydvd internet key check
  • block anydvd server
  • block internet access to anydvd
  • bt 3546 firmware
  • bt-3546 firmware
  • bt3546 access to seven
  • bt3546 firmware
All times are GMT +2. The time now is 12:52.
Top