105 Internal Target Failure in Nero

millerd47

I continue to receive an error when attempting to write DVD-R dics in Nero.
I am using the newest version 6.3.1.17
My harddrives have been defragmented recently.
This issue occurs with various source files.
The issue also occurs with different types of media.
Can anyone help me resolve this?

Nero InfoTool 2.21

Drive Information
------------------
Drive : PIONEER DVD-RW DVR-105
Type : Combo Drive
Firmware Version : 1.33
Buffer Size : 2000 KB
Date : 03-05-26
Serial Number : BJDL######WL
Vendor Specific : 03/05/26 PIONEER
Drive Letter : D:\
Location : 1:0
Mechanism : Tray
Read Speed : 6.0 X
Write Speed : 4.0 X

Read CD Text : Yes
Return C2 Pointers : Yes
Read CD-R : Yes
Read CD-RW : Yes
Read DVD-ROM : Yes
Read DVD-RAM : No
Read DVD-R : Yes
Read DVD-RW : Yes
Read DVD+R : No
Read DVD+RW : No
Read DVD+R DL : No
Read Digital Audio : Yes
Read CD+G : No
Read VideoCD : Yes

Write CD-R : Yes
Write CD-RW : Yes
Write DVD-R : Yes
Write DVD-RW : Yes
Write DVD+R : No
Write DVD+RW : No
Write DVD+R DL : No
Write DVD-RAM : No
Buffer Underrun Protection : Yes
Mount Rainier : No
Modes : Packet, TAO, DAO, SAO, RAW SAO, RAW DAO, RAW SAO 16, RAW SAO 96, RAW DAO 16, RAW DAO 96

Region Protection Control : RPC II
Region : 1
Changes User : 4
Changes Vendor : 4

Disc Information (D:\)
-------------------
Type : Blank DVD-R


Interface Information
---------------------
Adapter 1
---------
Description : Primary IDE Channel

Driver
Description : System32\DRIVERS\atapi.sys
Company : Microsoft Corporation
Version : 5.1.2600.1106 (xpsp1.020828-1920)
Description : IDE/ATAPI Port Driver

Attached Devices
Description : Master: IC35L040AVVN07-0
Type : Disk Drive
DMA : On
Description : Slave: WDC WD800JB-00CRA1
Type : Disk Drive
DMA : On

Adapter 2
---------
Description : Secondary IDE Channel

Driver
Description : System32\DRIVERS\atapi.sys
Company : Microsoft Corporation
Version : 5.1.2600.1106 (xpsp1.020828-1920)
Description : IDE/ATAPI Port Driver

Attached Devices
Description : Master: PIONEER DVD-RW DVR-105
Type : CD-Rom Drive
DMA : On
Autorun : On
Description : Slave: WDC WD1200JB-00DUA3
Type : Disk Drive
DMA : On

Attached Images

 

Wesociety

Try another recording app such as CloneDVD2 to see if all of your burns still fail.
You can find a trial here: http://www.elby.ch/products/clone_dvd/

Anyone else have a clue as to why he is getting these errors?

__________________
WesleyTech.com Blu-ray Disc & consumer technology reviews, news & articles

millerd47

tryed writing a dvd-r on clonedvd2 with no sucsess. Got a n error that says DVD write error (WriteDVD9). A DVD write error has occured,probaly caused by a bad medium. Please replace the medium and try again. So I did with a new pro disk, still same error right away.

Wesociety

Found a few discussions that mention "internal target failure" on the 105 here:
http://forum.digital-digest.com/arch...c/22497-1.html

and here:
http://forums.cdcovers.cc/showthread.php?t=87665

The problem appears to be due to the media.

__________________
WesleyTech.com Blu-ray Disc & consumer technology reviews, news & articles

fisherX

I had the same problem with my 105 - internal target failure and power calibration errors. I tried different media, different burning software , different FW , lens cleaning ,nothing worked. I also noticed dvd read speeds had slowed way down. It would however still burn cds . Anyway after much testing I gave up.

kamaldeepyadav

This is Essentially a hardware error.
No need to delete filters.

Just Clean Your Lens.
Grease The Rails.

Follow step by step instructions at

http://www.geocities.com/liru67/clea...w__part_1.html


Kamal Deep Yadav

bgtvfr

got the same error on my 106 when trying to burn a DVD at 1x. I upped the speed to 2x and the burn succeeded.