New Optiarc AD-7200S 1.0A Firmware

NEC / Optiarc Writer Discuss, New Optiarc AD-7200S 1.0A Firmware at CD and DVD Writers forum; As indicated on the following website: http://www.sony-optiarc.eu/supportse...s/ad7200s.html firmware version 1.0A has been released as of 1-28-09 for the Optiarc AD-7200S drive. I looked through several of the other 72xx series units and this is the only one with firmware newer than 1.09. There are no release notes of any kind

Old Posted: 05-02-2009
default_avatar
plexdude (CD Freaks Junior Member)
Posts: 72
  • Find More Posts by plexdude
As indicated on the following website:

http://www.sony-optiarc.eu/supportse...s/ad7200s.html

firmware version 1.0A has been released as of 1-28-09 for the Optiarc AD-7200S drive. I looked through several of the other 72xx series units and this is the only one with firmware newer than 1.09. There are no release notes of any kind for this firmware.

Liggy, if you could find the time to spare, could you do your usual routine with this version (auto-bitsetting, rpc1)? Thanks in advance.
__________________
Intel E8400 Core2 Duo @ 3.6 GHz | Gigabyte GA-EP45-UD3R | LiteOn DH-20A4P DVD burner | Samsung SH-S203B SATA DVD burner | Optiarc AD-7200S SATA DVD Burner | 4GB G-Skill F2-6400CL4D-4GBPI-B | Windows Vista 64-bit w/ SP1
default_avatar
Today (MyCE Staff)
Posts: 15,596
Old Posted: 05-02-2009
Liggy's Avatar
Liggy (CD Freaks System Admin)
Posts: 6,583
  • Find More Posts by Liggy
This firmware is already on my harddisc. But it might take a while until I find time for patching again. However I'm not going to add auto-bitsetting - only manual bitsetting
__________________
You need to flash or dump your NEC DVD burner firmwares on your Mac, Windows, DOS or Linux machine? Just try Binflash.
Visit Liggy's and Dee's Optiarc and NEC firmware and tools page for all kind of information about NEC and Optiarc drives.

Unrequested PM about drive problems will not be answered!
Old Posted: 05-02-2009
DrageMester's Avatar
DrageMester (Retired Moderator)
Posts: 17,614
  • Find More Posts by DrageMester DrageMester is online now
Quote:
Originally Posted by Liggy View Post
This firmware is already on my harddisc.
I never even suspected you could use Optiarc firmware on a harddrive!
__________________
Do not meddle in the affairs of dragons, for you are crunchy and taste good with ketchup.
Old Posted: 05-02-2009
Liggy's Avatar
Liggy (CD Freaks System Admin)
Posts: 6,583
  • Find More Posts by Liggy
I didn't say that I flashed my harddisc with this firmware
__________________
You need to flash or dump your NEC DVD burner firmwares on your Mac, Windows, DOS or Linux machine? Just try Binflash.
Visit Liggy's and Dee's Optiarc and NEC firmware and tools page for all kind of information about NEC and Optiarc drives.

Unrequested PM about drive problems will not be answered!
Old Posted: 06-02-2009
default_avatar
plexdude (CD Freaks Junior Member)
Posts: 72
  • Find More Posts by plexdude
Quote:
Originally Posted by Liggy View Post
This firmware is already on my harddisc. But it might take a while until I find time for patching again. However I'm not going to add auto-bitsetting - only manual bitsetting
I can't help but be curious as to your reasons for this. I'm probably misunderstanding something here, but I don't see the point of tweaking the fw to allow "manual" bitsetting. How is what you do with the fw to allow manual bitsetting different than what a user can do with any 'ol program that allows changing the bitsetting (i.e CDSpeed)?
__________________
Intel E8400 Core2 Duo @ 3.6 GHz | Gigabyte GA-EP45-UD3R | LiteOn DH-20A4P DVD burner | Samsung SH-S203B SATA DVD burner | Optiarc AD-7200S SATA DVD Burner | 4GB G-Skill F2-6400CL4D-4GBPI-B | Windows Vista 64-bit w/ SP1
Old Posted: 06-02-2009
Liggy's Avatar
Liggy (CD Freaks System Admin)
Posts: 6,583
  • Find More Posts by Liggy
Auto bitsetting means that the firmware automatically sets the booktype of a given disc to DVD-ROM and that you cannot change it. That's what you have on some (patched) Pioneer firmwares.

Manual bitsetting means that you can run programs like CD-Speed to change the booktype setting between DVD-ROM and the real disctype - just the way you want it to be.
__________________
You need to flash or dump your NEC DVD burner firmwares on your Mac, Windows, DOS or Linux machine? Just try Binflash.
Visit Liggy's and Dee's Optiarc and NEC firmware and tools page for all kind of information about NEC and Optiarc drives.

Unrequested PM about drive problems will not be answered!
Old Posted: 06-02-2009
negritude's Avatar
negritude (MyCE Resident)
Posts: 4,453
  • Find More Posts by negritude
Quote:
Originally Posted by Liggy View Post
Auto bitsetting means that the firmware automatically sets the booktype of a given disc to DVD-ROM and that you cannot change it. That's what you have on some (patched) Pioneer firmwares.

Manual bitsetting means that you can run programs like CD-Speed to change the booktype setting between DVD-ROM and the real disctype - just the way you want it to be.
So, your Optiarc/NEC modified bt firmwares normally do it the latter way?

I thought that bt firmwares normally allow us to turn on auto-bitsetting via binflash, so that it doesn't matter what program you use. This is important, for example, when using non-Windows operating systems like OS X and Linux. I want the firmware to auto-bitset, so that I don't have to remember to do it each time, and so that it's irrelevant as to what program I am using to burn.

I think I'm missing something. Maybe the way binflash turns on bitsetting on an NEC drive is a different thing from the way auto-bitsetting works on a Pioneer. One can be turned on and off, and the other can't. However, that seems like a semantical difference that is not how laypeople understand it. To them, whether it's a permanent thing that can't be turned off or a semi-permanent thing that can is wholly irrelevant, since 99% of the time, they never want to turn it off in the first place.

You know, I'm a geek myself, but sometimes, geeks and their anal retentive technical precision gets on my nerves.
Old Posted: 06-02-2009
Liggy's Avatar
Liggy (CD Freaks System Admin)
Posts: 6,583
  • Find More Posts by Liggy
Right. Just flashing the bitsetting firmware does not automatically enable changing the booktype to DVD-ROM. You first need to tell the drive to activate bitsetting. However you can permanently change the setting so you don't have to remember it and this setting will stay even if you flash with a new firmware that supports bitsetting.

It also should not be important for OS X or Linux because with necflash you can also change the booktype under these operating systems But most people will probably set once and then forget (at least I do). Some people might want different settings for different disctypes (DVD+R, DVD+RW, DVD+R-DL). This cannot be achieved with auto-bitsetting firmwares.

Anyway - that's the way it works on my patches (and even some unmodified OEM firmwares for some drives) and won't be changed
__________________
You need to flash or dump your NEC DVD burner firmwares on your Mac, Windows, DOS or Linux machine? Just try Binflash.
Visit Liggy's and Dee's Optiarc and NEC firmware and tools page for all kind of information about NEC and Optiarc drives.

Unrequested PM about drive problems will not be answered!
Old Posted: 07-02-2009
default_avatar
plexdude (CD Freaks Junior Member)
Posts: 72
  • Find More Posts by plexdude
Oh OK Liggy... thanks for the clarification. I see what you're saying now. I like the way you've been creating the bitsetting firmwares. I trust the burn strategies set by Sony/NEC/Optiarc are about as optimized as they can be for the media that I use which is why your bitsetting tweak is all I ever really like to have in addition. Thank you for you continued support on these drives. Your time spent is appreciated by so many of us cdfreaks.
__________________
Intel E8400 Core2 Duo @ 3.6 GHz | Gigabyte GA-EP45-UD3R | LiteOn DH-20A4P DVD burner | Samsung SH-S203B SATA DVD burner | Optiarc AD-7200S SATA DVD Burner | 4GB G-Skill F2-6400CL4D-4GBPI-B | Windows Vista 64-bit w/ SP1
Old Posted: 06-03-2009
default_avatar
KristianT (New on Forum)
Posts: 12
  • Find More Posts by KristianT
I previously had the 1.06 firmware with bitsetting feature installed. However, I just updated the firmware to the official 1.0A - but it seems that my drive is "still under the influence" of the bitsetting firmware. When checking my current settings, ImgBurn says that both DVD +R and DVD +R DL are set to DVD-ROM. I'm happy, as this is what I want, but I thought that official firmwre didn't support this. Can somebody set me straight?
Old Posted: 06-03-2009
Liggy's Avatar
Liggy (CD Freaks System Admin)
Posts: 6,583
  • Find More Posts by Liggy
As far as I remember the routine for querying the current booktype values supplies the values that you can set with a BT firmware even though this value is not used when burning.
__________________
You need to flash or dump your NEC DVD burner firmwares on your Mac, Windows, DOS or Linux machine? Just try Binflash.
Visit Liggy's and Dee's Optiarc and NEC firmware and tools page for all kind of information about NEC and Optiarc drives.

Unrequested PM about drive problems will not be answered!
Old Posted: 06-03-2009
default_avatar
KristianT (New on Forum)
Posts: 12
  • Find More Posts by KristianT
Ah, makes sense, then. Back to newest Liggy-BT firmware :-) Thanks for answering.

Oh, one more thing. With regards to your answer: Does that also mean that one can't set the BT before each burn on a 7200S with official firmware and have the drive use it?
Old Posted: 06-03-2009
Liggy's Avatar
Liggy (CD Freaks System Admin)
Posts: 6,583
  • Find More Posts by Liggy
No, you cannot set the value with official firmwares plus there's no code that would check a booktype setting when burning a disc.
Old Posted: 16-03-2009
default_avatar
Oz. (CD Freaks Senior Member)
Posts: 280
  • Find More Posts by Oz.
Hi Liggy.

Been searching but not found the answer. Is the 7200S same drive as 7203S? Can I flash 7203S firmware on the 7200S? Currently running your 1.09BT_RPC1.

As always, thanks for your effort on this board!
__________________
Oz
Old Posted: 16-03-2009
_chef_'s Avatar
_chef_ (MyCE Resident)
Posts: 27,517
  • Find More Posts by _chef_
Quote:
Originally Posted by Oz. View Post
Hi Liggy.

Been searching but not found the answer. Is the 7200S same drive as 7203S? Can I flash 7203S firmware on the 7200S? Currently running your 1.09BT_RPC1.

As always, thanks for your effort on this board!
OT!

Read this: http://club.cdfreaks.com/f86/nec-nd-...thread-166962/
__________________
'Things are now in motion that cannot be undone.' [Gandalf, LoTR]

Enable DMA with micrAp$0ft Enable DMA free at your will busTRACE => Upper/Lower Filters Util
DevCon ***HOW TO ... Delete the Upper & Lower Filters!***

If you expect help then please start now by using the powerful SEARCH.
....................... sick of spam? Try free Spybot and Threatfire ..........................
Old Posted: 16-03-2009
Liggy's Avatar
Liggy (CD Freaks System Admin)
Posts: 6,583
  • Find More Posts by Liggy
Both drives (7200S and 7203S) share the same hardware, but you cannot simply apply the 7203S firmware on a 7200S drive. You would have to change the drive's bootcode first but this is not supported by us.
__________________
You need to flash or dump your NEC DVD burner firmwares on your Mac, Windows, DOS or Linux machine? Just try Binflash.
Visit Liggy's and Dee's Optiarc and NEC firmware and tools page for all kind of information about NEC and Optiarc drives.

Unrequested PM about drive problems will not be answered!
Old Posted: 17-03-2009
default_avatar
Oz. (CD Freaks Senior Member)
Posts: 280
  • Find More Posts by Oz.
Ok, thanks
__________________
Oz
Old Posted: 22-03-2009
evo69's Avatar
evo69 (CDFreaks Resident)
Posts: 904
  • Find More Posts by evo69
What happened to the 1.0A patched firmware? Liggy, man, are you still busy?
__________________
I'm hooked on discs and drives.
In use: Optiarc AD-7200S (1.09bt) • Samsung SH-S203N (SB02) • LG GSA-H62N (CL01) • LiteOn iHAS220 (8LC2) • Sony DRX-810UL <-> BenQ EW164B (BEFB) • 3x BenQ DW1640 (BSLB/BSRB/BEFB) • 2x LiteOn LTR-52327S (QS0E/QS5A) • Plextor PX-W2410A (1.04) • Plextor PX-716UF (1.11) • Plextor Premium-U (1.06)
I feed my Canon MP610 with MCC 02RG20 & MCC 03RG20
Still wanting a: SATA Sanyo Plextor DVD±RW, Yamaha CRW-F1, well-performing USB/FW 5.25" Enclosures (like MaPower H51)
Interested but not dying to get a: Optiarc AD-7240S, Plextor Premium 2, BenQ DW1650/1655, Pioneer DVR-217, BD-RE drive
Old Posted: 22-03-2009
Liggy's Avatar
Liggy (CD Freaks System Admin)
Posts: 6,583
  • Find More Posts by Liggy
Quote:
Originally Posted by evo69 View Post
Liggy, man, are you still busy?
I always am
But I'm sure there will be a patched 1.0A firmware someday
__________________
You need to flash or dump your NEC DVD burner firmwares on your Mac, Windows, DOS or Linux machine? Just try Binflash.
Visit Liggy's and Dee's Optiarc and NEC firmware and tools page for all kind of information about NEC and Optiarc drives.

Unrequested PM about drive problems will not be answered!
Old Posted: 22-03-2009
evo69's Avatar
evo69 (CDFreaks Resident)
Posts: 904
  • Find More Posts by evo69
Someday. I'll wait.
__________________
I'm hooked on discs and drives.
In use: Optiarc AD-7200S (1.09bt) • Samsung SH-S203N (SB02) • LG GSA-H62N (CL01) • LiteOn iHAS220 (8LC2) • Sony DRX-810UL <-> BenQ EW164B (BEFB) • 3x BenQ DW1640 (BSLB/BSRB/BEFB) • 2x LiteOn LTR-52327S (QS0E/QS5A) • Plextor PX-W2410A (1.04) • Plextor PX-716UF (1.11) • Plextor Premium-U (1.06)
I feed my Canon MP610 with MCC 02RG20 & MCC 03RG20
Still wanting a: SATA Sanyo Plextor DVD±RW, Yamaha CRW-F1, well-performing USB/FW 5.25" Enclosures (like MaPower H51)
Interested but not dying to get a: Optiarc AD-7240S, Plextor Premium 2, BenQ DW1650/1655, Pioneer DVR-217, BD-RE drive
Old Posted: 20-04-2009
default_avatar
stevvie (MyCE Rookie)
Posts: 45
  • Find More Posts by stevvie
am i missing something ? could you not just a version of both auto for people that use it ON all the time and a version of manual for people that like to switch. Call me selfish but I would like to have it ON all the time when My 7200S finally arives in the week.
__________________
Intel C2D E6600@356*9=3.2Ghz
MSI P35 Neo2-FR
4 X 1Gb g.skill DDR2 800 PC6400
Saphire Radeon HD4850 Dual slot edition
Samsung 2032BW 20" monitor
-1X Samsung Spinpoint 512Gb SATA2
-1x Hitachi 160Gb Sata
-Optiarc 7200s
-ADSL 20Meg O2
Old Posted: 20-04-2009
Liggy's Avatar
Liggy (CD Freaks System Admin)
Posts: 6,583
  • Find More Posts by Liggy
If you want it set to on, what's so difficult about using the version for manual changes and permanently set the booktype then?
__________________
You need to flash or dump your NEC DVD burner firmwares on your Mac, Windows, DOS or Linux machine? Just try Binflash.
Visit Liggy's and Dee's Optiarc and NEC firmware and tools page for all kind of information about NEC and Optiarc drives.

Unrequested PM about drive problems will not be answered!
Old Posted: 20-04-2009
default_avatar
stevvie (MyCE Rookie)
Posts: 45
  • Find More Posts by stevvie
Ohh good, i misunderstood. I thought you had to set it before each burn. But thats REALLY good to know that it can be set to on. I set my BenqDW1640 to on ALL the time.
__________________
Intel C2D E6600@356*9=3.2Ghz
MSI P35 Neo2-FR
4 X 1Gb g.skill DDR2 800 PC6400
Saphire Radeon HD4850 Dual slot edition
Samsung 2032BW 20" monitor
-1X Samsung Spinpoint 512Gb SATA2
-1x Hitachi 160Gb Sata
-Optiarc 7200s
-ADSL 20Meg O2
Old Posted: 21-04-2009
gjazz's Avatar
gjazz (CD Freaks Junior Member)
Posts: 80
  • Find More Posts by gjazz
Looking forward to this, thanks for the time you spend patching, any bitsetting would be cracking
Old Posted: 24-04-2009
default_avatar
jason_godly (CD Freaks Member)
Posts: 111
  • Find More Posts by jason_godly
Looking forward to the bitsetting version of 1.0A

Thanks in advance Liggy!
__________________
NEC 4570A @ 1.Z2
NEC 3500A @ 2.TG
LiteOn 812S->832S --- RIP
LiteOn 52246S @ 6S0F
Plextor 1210A @ 1.10
There's more to MyCE.com

Listen up, we've got more. Product information on 107,830 products. Our experts have written 540 articles. We've gathered 16,489 news items for you to always keep updated.

Hello guest,
default
To benefit from all extra features you need to log in or sign up.

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Similar Threads

People who found this also searched for

  • ad-7200 s-ata version 1.0a
  • ad-7200s ata
  • firmware rw ad 7200s scsi
  • optiarc 7200s firmware
  • optiarc 7200s firmware 2
  • optiarc 7200s firmware 2009
  • optiarc ad-7200 s-ata driver
  • optiarc ad-7200 s-ata dvd driver
  • optiarc ad-7200s ata dvd firmware
  • optiarc ad-7200s firmware
  • optiarc ad-7200s firmware update windows 7
  • optiarc dvd rw driver download 7200
  • site club.cdfreaks.com target drive is not found correctly
  • target drive is not found correctly
  • target drive is not found correctly ad-7200
  • windows 7 ad7200s
  • # # downloads > # ad-7200s
  • 1. countermeasure system hang up issue at data transfer for read disc structure command
  • 1.0a прошивка для nec 7200
  • 64 bit driver for optiarc 7200
  • 7200 1.0a pata optiarc firmware linux
  • 7200 s dvd burner
  • 7200a target drive is not found correctly
  • 7200s
  • 7200s 1.09bt
  • 7200s 1.0a firmware
  • 7200s firmware
  • 7200s firmware 1.0a
  • 7200s firmware download
  • 7200s target drive is not found correctly
All times are GMT +2. The time now is 01:02.
Top