Crossflash SiL 3112 to 3512
| General Hardware Forum Discuss, Crossflash SiL 3112 to 3512 at Hardware forum; sorry for bumping in abruptly... i was following this thread and i have the sil 3112a card... i was wondering weather i can flash it with the sil3512 bios.. i think my sil 3112 is not compatible coz my current transfer rate is pio mode 4.. i cant get udma |
-
Posted:
15-10-2007
- # 1
sorry for bumping in abruptly... i was following this thread and i have the sil 3112a card... i was wondering weather i can flash it with the sil3512 bios.. i think my sil 3112 is not compatible coz my current transfer rate is pio mode 4.. i cant get udma mode 5.. Any guesses?
- Today (MyCE Staff)
- Posts: 15,596
-
Posted:
16-10-2007
- # 3
i flashed with the base sil 3512 bios and now the card is seen as 3512 but it wont detect my s203b now... im gona try to flash it back to 3112 -
Posted:
16-10-2007
- # 4
Split from Samsung SH-S203B Firmware Problem (http://club.cdfreaks.com/showthread.php?t=228716) -
Posted:
16-10-2007
- # 5
flashed back to 3112 and now it detects the drive.. but its still pio mode 4... i cant seem to get dma.. any solutions? -
Posted:
16-10-2007
- # 6
HiQuote:Originally Posted by killer7hunki flashed with the base sil 3512 bios and now the card is seen as 3512 but it wont detect my s203b now... im gona try to flash it back to 3112
After flashing bios, did you install the 3512 driver?
Also, what driver are you using now? (With card running as 3112) -
Posted:
16-10-2007
- # 7
zebadee, I also bought me a SiL3512 PCI sata controller card... Just wanted to try out all the "problems" our members are posting.Quote:Originally Posted by zebadeeHi
Welcome onboard killer7hunk.
Yes you can flash the bios, so card is seen as 3512. Then use the appropriate drives for CD/DVDRWs.
Just make sure the bios is the 'BASE' bios. It has an 'r' prefix.
Bios and f/w are dated mid '06 and I just poped it into one free PCI slot, started up compu, loaded latest SiL drivers. Connected my new S203N and reboted.
Drive was properly recognized and I get a burst rate of 67MB/s.
Burns/scans/Trt's are great
My add to this; I've a feeling we just complicate the issues too much.
BTW, from what I understand "r" prefix BIOS is "- add-in card SATARAID BIOS" from what I read at SiliconImage page. But, I might be wrong though.
Note, my burning rig is based on $ntel 865PE chipset with C2D chip.
People who found this also searched for
- sil 3112 utility
- 0680 firmware upgrade flash onboard
- 3112 3512
- 3112 crossflash
- 3112 or 3512
- 3112 to 3512
- 3112 to 3512 crossflash
- 3112a flash
- 3512 3112
- 3512 bios 3112
- 3512 bios can be installed in 3112
- 3512 flash onboard
- base bios sil3112
- bios chipset for sil3112
- bios flashing 3112
- bios sil3112 on sil 3112r
- bios update onboard sil3112
- compare sil3112a controller to sil3512a controller which is better
- cross flash sii3112
- cross flash sil3112 sil3512
- crossflash 3112 to
- crossflash sil3112 to 3512
- crossflashing sil3512
- differenze sil3112 sil3512
- dvd rw not recognized on sii3112
- firmware si3112
- firmware sil 3112a
- firmware sil3112
- flash 3112

