Please Help: CD recording problem
| General Hardware Forum Discuss, CD recording problem at Computer Hardware forum; I experience a strange problem after I recently changed from Windows 2000 to Windows XP (SP3). I have no problems reading CDs in my CD drive (LITE-ON LTR-52327S) nor DVDs in my DVD drive (Optiarc DVD RW AD-7173A). Both drives have drive letters. However, I tried for a first time |
| I experience a strange problem after I recently changed from Windows 2000 to Windows XP (SP3). I have no problems reading CDs in my CD drive (LITE-ON LTR-52327S) nor DVDs in my DVD drive (Optiarc DVD RW AD-7173A). Both drives have drive letters. However, I tried for a first time to record CD on Windows XP, using Nero Express, and it stops either at 13% with an error message that the Burning failed. Interestingly enough, I have problems with the other recording software too, like Free Easy Burner and with Windows XP CD recording utility itself, giving up with different kind of errors. It seems that I got only one CD through, but I am not sure how it hapenned, because I think that I got error messages each time I tried. I read somewhere in the Forum that I need to enable DMA, but I cannot find neither the "Primary IDE Channel" nor the "Secondary IDE channel" under IDE ATA/ATAPI controller in Device Manager, and both the CD and the DVD drive appear as SCSI CD ROM devices in the Device Manager. This surprizes me, because I think they have ATA interface - are they detected wrongly in Windows XP? Recently I tried out software for reading ISOs, like Magic ISO and Clone..., can it be that they messed up the system and CD / DVD drive? To keep it short - what is going on? Regards, Petar |
- Today (MyCE Staff)
- Posts: 15,596
| |
| Nero LOG file comes below: Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 1/29/2003 10:37:36 PM Nero Version: 5.5.10.40 ( Nero Express) Recorder: <LITE-ON LTR-52327S> Version: QS0B - HA 1 TA 0 - 5.5.10.40 Adapter driver: <> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <Optiarc DVD RW AD-7173A>Version: 1-02 - HA 0 TA 1 - 5.5.10.40 Adapter driver: <nvidesm> HA 0 Bus Type : default (0) -> ATAPI, detected: ATAPI === Scsi-Device-Map === DiskPeripheral : WDC WD800JB-00FSA0 77.0 nvidesm Port 0 ID 0 DMA: ? CdRomPeripheral : LITE-ON LTR-52327S QS0B nvidesm Port 0 ID 0 DMA: ? CdRomPeripheral : Optiarc DVD RW AD-7173A 1-02 nvidesm Port 0 ID 1 DMA: ? ======================= AutoRun : 1 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 511MB (523760kB) Free physical memory: 123MB (126912kB) Memory in use : 75 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Enabled (1) Wizard: On 21.6.2009 CD-ROM (ISO) 11:43:21 PM #1 Text 0 File Isodoc.cpp, Line 7576 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : TAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 11:43:21 PM #2 Phase 90 File dlgbrnst.cpp, Line 1655 Buffer Underrun Protection activated 11:43:21 PM #3 Text 0 File Reader.cpp, Line 115 Reader running 11:43:21 PM #4 Text 0 File Writer.cpp, Line 125 Writer LITE-ON LTR-52327S running 11:43:21 PM #5 ISO9660GEN -11 File geniso.cpp, Line 4571 First writeable address = 0 (0x00000000) 11:43:21 PM #6 Text 0 File Burncd.cpp, Line 3741 Turn on Track-At-Once, using CD-R/RW media 11:43:21 PM #7 Text 0 File ThreadedTransferInterface.cpp, Line 672 Setup items (original item values) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original CD pos #0 + 132882 (132882) = #132882/29:31.57 relocatable, CD pos for caching/writing not required/required, no patch infos -------------------------------------------------------------- 11:43:37 PM #8 Text 0 File DlgWaitCD.cpp, Line 225 Last possible write address on media: 359848 (79:59.73) Last address to be written: 132881 (29:33.56) 11:43:37 PM #9 Text 0 File DlgWaitCD.cpp, Line 230 Write in overburning mode: FALSE 11:43:37 PM #10 Text 0 File DlgWaitCD.cpp, Line 1700 Recorder: LITE-ON LTR-52327S; CDR code: 00 97 24 16; OSJ entry from: SONY Corporation ATIP Data: Special Info [hex] 1: D0 00 A0, 2: 61 18 10 (LI 97:24.16), 3: 4F 3B 4A (LO 79:59.74) Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid) 11:43:37 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 824 Prepare recorder LITE-ON LTR-52327S for write in TAO DAO infos: ========== MCN: TOCTYPE: 0x0 Session Closed, CD not fixated Tracks 1 to 1: TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 272449536 11:43:37 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 852 Removed 2 run-out blocks from end of track 1. 11:43:37 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 672 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original CD pos #0 + 132882 (132882) = #132882/29:31.57 relocatable, CD pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 132880 blocks [LITE-ON LTR-52327S ] -------------------------------------------------------------- 11:43:37 PM #14 Phase 24 File dlgbrnst.cpp, Line 1655 Caching of files started 11:43:37 PM #15 Phase 25 File dlgbrnst.cpp, Line 1655 Caching of files completed 11:43:37 PM #16 Phase 36 File dlgbrnst.cpp, Line 1655 Burn process started at 52x (7,800 KB/s) 11:43:37 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 1978 Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0 11:43:37 PM #18 Text 0 File Mmc.cpp, Line 18303 Set BUFE: supported -> ON , SMART-BURN : ON 11:43:47 PM #19 SCSI -500 File Cdrdrv.cpp, Line 1443 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x025C0000 Status: 0x02 (0x03, SCSI_ABORTED) HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED) TA-Status 0x00 (0x00, OK) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x26 Sense Qual: 0x02 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x1F 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x26 0x02 11:43:47 PM #20 Text 0 File Writer.cpp, Line 453 23:43:47.703 LITE-ON LTR-52327S : WriteBuffer reduced to 32768 Bytes 11:43:47 PM #21 Text 0 File Writer.cpp, Line 316 23:43:47.718 - LITE-ON LTR-52327S : Queue again later (Intervall : 8msec) 11:43:56 PM #22 Text 0 File Writer.cpp, Line 442 SCSI-Layer send CDRERR_BUFFER_TO_BIG to writer 11:43:56 PM #23 Text 0 File Writer.cpp, Line 453 23:43:56.703 LITE-ON LTR-52327S : WriteBuffer reduced to 30720 Bytes 11:44:05 PM #24 Text 0 File Writer.cpp, Line 453 23:44:05.703 LITE-ON LTR-52327S : WriteBuffer reduced to 28672 Bytes 11:44:14 PM #25 Text 0 File Writer.cpp, Line 453 23:44:14.703 LITE-ON LTR-52327S : WriteBuffer reduced to 26624 Bytes 11:44:23 PM #26 Text 0 File Writer.cpp, Line 453 23:44:23.703 LITE-ON LTR-52327S : WriteBuffer reduced to 24576 Bytes 11:44:32 PM #27 Text 0 File Writer.cpp, Line 453 23:44:32.703 LITE-ON LTR-52327S : WriteBuffer reduced to 22528 Bytes 11:44:42 PM #28 Text 0 File Writer.cpp, Line 453 23:44:42.703 LITE-ON LTR-52327S : WriteBuffer reduced to 20480 Bytes 11:44:51 PM #29 Text 0 File Writer.cpp, Line 453 23:44:51.718 LITE-ON LTR-52327S : WriteBuffer reduced to 18432 Bytes 11:44:59 PM #30 Text 0 File Writer.cpp, Line 453 23:44:59.718 LITE-ON LTR-52327S : WriteBuffer reduced to 16384 Bytes 11:45:07 PM #31 Text 0 File Writer.cpp, Line 453 23:45:07.718 LITE-ON LTR-52327S : WriteBuffer reduced to 14336 Bytes 11:45:16 PM #32 Text 0 File Writer.cpp, Line 453 23:45:16.718 LITE-ON LTR-52327S : WriteBuffer reduced to 12288 Bytes 11:45:24 PM #33 Text 0 File Writer.cpp, Line 453 23:45:24.718 LITE-ON LTR-52327S : WriteBuffer reduced to 10240 Bytes 11:45:32 PM #34 Text 0 File Writer.cpp, Line 453 23:45:32.718 LITE-ON LTR-52327S : WriteBuffer reduced to 8192 Bytes 11:45:40 PM #35 Text 0 File Writer.cpp, Line 453 23:45:40.718 LITE-ON LTR-52327S : WriteBuffer reduced to 6144 Bytes 11:45:48 PM #36 Text 0 File Writer.cpp, Line 453 23:45:48.718 LITE-ON LTR-52327S : WriteBuffer reduced to 4096 Bytes 11:45:56 PM #37 Text 0 File Writer.cpp, Line 453 23:45:56.718 LITE-ON LTR-52327S : WriteBuffer reduced to 2048 Bytes 11:46:04 PM #38 SCSI -500 File Cdrdrv.cpp, Line 1443 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x025C0000 Status: 0x02 (0x03, SCSI_ABORTED) HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED) TA-Status 0x00 (0x00, OK) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x26 Sense Qual: 0x02 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x01 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x26 0x02 11:46:04 PM #39 Text 0 File Writer.cpp, Line 446 Recorder-Buffer cannot be reduced any more 11:46:04 PM #40 CDR -500 File Writer.cpp, Line 333 SCSI/IDE Command aborted 11:46:04 PM #41 Text 0 File ThreadedTransfer.cpp, Line 222 all writers idle, stopping conversion 11:46:04 PM #42 Text 0 File ThreadedTransfer.cpp, Line 216 conversion idle, stopping reader 11:46:08 PM #43 CDR -201 File WriterStatus.cpp, Line 194 Invalid write state 11:46:08 PM #44 TRANSFER -18 File WriterStatus.cpp, Line 194 Could not perform EndTrack 11:46:08 PM #45 Text 0 File Mmc.cpp, Line 13301 <LITE-ON LTR-52327S > start Close Session 11:46:08 PM #46 Phase 38 File dlgbrnst.cpp, Line 1655 Burn process failed at 52x (7,800 KB/s) 11:46:08 PM #47 Text 0 File Scsicmd.cpp, Line 406 SCSI not using temporary buffers 20 out of 20 temporary buffers allocated Existing drivers: File 'Drivers\nvidesm.sys': Ver=5.10.2600.0307 built by: WinDDK, size=20224 bytes, created 11/13/2002 3:10:00 PM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) |
| Has anybody idea what is going on with my PC - why can't I record any CDs anymore? |
| Welcome to the forum  Nero 5.5? That's an old version, so the first thing I'd do is grab an upgrade to at least v6.6.x.x Secondly, Nero is known to misreport DMA status when you're using non-M$ IDE drivers, so it might be an idea to uninstall the nVidia ones and use Windows' generic drivers. I also wouldn't choose 52x write speed, even on Sony discs...I'd go for something like 32x for data, 16x-24x for audio. Just personal preference there, of course. 
__________________ Current drives: Samsung SH-S223F (SB03 RPC1 + other goodies) + TSST (Samsung) TS-H653F (D200) + Samsung SH-S203N (SB02 RPC1 + other goodies) + Optiarc AD-5170S (1.12) + Litey LH-20A1H (LL0D) + Samsung SH-S182D (SB06 RPC1) x2 + LG E10N (JE07) + BenQ DW1650 (BCDC) + BenQ DW1640@164B (BEFB) + LG 4167B (DL13 TDB) + NEC ND-4551A (1.Z2) + LG GCE-8520B (1.00) + LiteOn SOHR-5239S (2S0B) Retired: LiteOn LDW-851@SOHW-832 + LiteOn SOHW-1693S + LG 4163B + Pioneer DVR-115D My Review PCs How to delete your upper and lower filters : How to check/enable DMA by Womble Click here to join cdfreaks.com and be part of our friendly community!  The CDFreaks Distributed Computing Teams need YOU! Join the Team(s) and help save some lives! Read more here  |
| Thanks arachne for the good advice. I removed the Nvidia IDE/ATAPI driver, and removed the CD/DVD drivers from the Device manager, and on the next restart the Primary and Secondary IDE channel suddenly appeared. No SCSI references anymore. Now I can record CDs again, so the problem is solved... Regards, P. |
There's more to MyCE.com
Listen up, we've got more. Product information on 102,541 products. Our experts have written 521 articles. We've gathered 16,068 news items for you to always keep updated.
