Can't burn or can burn but not read on same system

mxr · 12-05-2007

Well, as the thread says I have a problem. Yes, it has been discussed a lot in the forums but I haven't found a solution to this problem yet.

Basically it goes like this - there have been issues that I can't burn DVDs or CDs at all - process does not even start and fails right in the beginning or I can burn but it is not readable on the burner who burnt it but it is recognized in other drives and systems fine.

I am writing here in general hardware because this issue was with 3 different drives on 3 different systems. The common thing though is Nero which has disappointed me a lot recently.

Either way, same burner on a linux system burnt my DVD images perfectly and read them too.

I tried firmware upgrades, Nero removal, force ASPI, IDE drivers, checked for proper DMA settings, changed media, checked power supply voltages etc., etc. but problem remains. So I guess it is very much software side related.

By the way this issue kept appearing on a TSST notebook drive, on a TSST SH-S182 and a older Pioneer A06.

mxr · 12-05-2007

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 7.7.5.1
Internal Version: 7, 7, 5, 1

Recorder: <PIONEER DVD-RW DVR-106D>Version: 1.08 - HA 1 TA 0 - 7.7.5.1
Adapter driver: <IDE> HA 1
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <PZ5044H TDM376G >Version: 1.0 - HA 1 TA 1 - 7.7.5.1
Adapter driver: <SCSI> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : PIONEER DVD-RW DVR-106D atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD1200JD-00HBB0 atapi Port 2 ID 0 DMA: On
DiskPeripheral : WDC WD3200JS-00PDB0 atapi Port 3 ID 0 DMA: On
CdRomPeripheral : PZ5044H TDM376G 1.0 atbu7b6d Port 6 ID 0 DMA: Off

=== CDRom-Device-Map ===
PIONEER DVD-RW DVR-106D F: CDRom0
PZ5044H TDM376G G: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1023MB (1048044kB)
Free physical memory: 528MB (541616kB)
Memory in use : 48 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

12.5.2007
Audio CD
19:51:30 #1 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

19:51:30 #2 CDADOC -1 File Cdadoc.cpp, Line 1639
Audio item log info:
Audio document burn settings:
=============================
Burn mode: DAO,
CD Text: On,
Cache disk or network files: No,
Cache small files: No,
Cache files smaller than 65536 bytes.
Audio Multisession: No
List of audio tracks:
=====================
Track 01: Length: 79:28.21, Pause frames: 150, Filters: 0, Name: '02_va_-_house_top_100_vol.7.mp3'.
Total size: 79:30.21

19:51:30 #3 Text 0 File Burncd.cpp, Line 3163
PIONEER DVD-RW DVR-106D
Buffer underrun protection activated

19:51:30 #4 Text 0 File AudioCompilationImpl.cpp, Line 838
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

19:51:30 #5 Text 0 File Burncd.cpp, Line 3465
Turn on Disc-At-Once, using CD-R/RW media

19:51:33 #6 Text 0 File DlgWaitCD.cpp, Line 306
Last possible write address on media: 359844 ( 79:59.69)
Last address to be written: 357620 ( 79:30.20)

19:51:33 #7 Text 0 File DlgWaitCD.cpp, Line 318
Write in overburning mode: NO (enabled: CD)

19:51:33 #8 Text 0 File DlgWaitCD.cpp, Line 2912
Recorder: PIONEER DVD-RW DVR-106D;
CDR code: 00 97 15 17; OSJ entry from: Ritek Co.
ATIP Data:
Special Info [hex] 1: C0 00 90, 2: 61 0F 11 (LI 97:15.17), 3: 4F 3B 46 (LO 79:59.70)
Additional Info [hex] 1: FF FF FF (invalid), 2: FF FF FF (invalid), 3: FF FF FF (invalid)

19:51:33 #9 Text 0 File DlgWaitCD.cpp, Line 490
>>> Protocol of DlgWaitCD activities: <<<
=========================================

19:51:33 #10 Text 0 File ThreadedTransferInterface.cpp, Line 823
Setup items (after recorder preparation)
0: TRM_AUDIO_NOPRE (02_va_-_house_top_100_vol.7.mp3)
2 indices, index0 (150) not provided
original disc pos #0 + 357621 (357621) = #357621/79:28.21
relocatable, disc pos for caching/writing not required/not required
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 357621 blocks [F: PIONEER DVD-RW DVR-106D]
--------------------------------------------------------------

19:51:33 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1026
Prepare [F: PIONEER DVD-RW DVR-106D] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: "†††††† Āā"
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 0 352800 841477392, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
-150 | lead-in | 0 | 0x01 | 0 | 0 | 0x00
-150 | 1 | 0 | 0x21 | 357621 | -150 | 0x00
0 | 1 | 1 | 0x21 | 357621 | 0 | 0x00
357621 | lead-out | 1 | 0x01 | 0 | 0 | 0x00

19:51:33 #12 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

19:51:33 #13 Phase 32 File dlgbrnst.cpp, Line 1760
Simulation started at 16x (2 400 KB/s)

19:51:34 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2764
Verifying disc position of item 0 (relocatable, no disc pos, no patch infos, orig at #0): write at #0

19:51:36 #15 Text 0 File MMC.cpp, Line 17582
StartDAO : CD-Text - On

19:51:36 #16 Text 0 File MMC.cpp, Line 22250
Set BUFE: Buffer underrun protection -> ON

19:52:35 #17 Text 0 File MMC.cpp, Line 17812
CueData, Len=32
01 00 00 41 00 00 00 00
01 01 00 00 00 00 00 00
01 01 01 00 00 00 02 00
01 aa 01 01 00 4f 1e 15

19:52:38 #18 SPTI -1142 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1142)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x1B
Sense Qual: 0x00
CDB Data: 0x2A 00 FF FF CF 24 00 02 AA 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 0E 00 00 00 00 1B
Buffer x06896400: Len xffc0
0x20 00 00 00 00 00 01 08 1B 37 15 33 19 12 01 14
0x1B 37 00 20 0C 1B 38 3C 20 00 04 01 02 33 00 30
0x08 05 19 2F 1B 02 38 37 00 00 00 00 00 04 11 23

19:52:38 #19 CDR -1142 File Writer.cpp, Line 301
Synchronous data transfer error
F: PIONEER DVD-RW DVR-106D

19:52:38 #20 Phase 34 File dlgbrnst.cpp, Line 1760
Simulation failed at 16x (2 400 KB/s)

19:52:38 #21 Text 0 File AudioCompilationImpl.cpp, Line 863
DRM: DRM burn session terminated.

19:52:38 #22 Text 0 File AudioCompilationImpl.cpp, Line 892
DRM: Closing entire DRM handling. Bye.

19:52:38 #23 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

19:52:43 #24 Text 0 File Cdrdrv.cpp, Line 10529
DriveLocker: UnLockVolume completed

19:52:43 #25 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

mxr · 12-05-2007

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 7.7.5.1
Internal Version: 7, 7, 5, 1

Recorder: <TSSTcorp CD/DVDW SH-S182D>Version: SB05 - HA 1 TA 0 - 7.7.5.1
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <PZ5044H TDM376G >Version: 1.0 - HA 1 TA 1 - 7.7.5.1
Adapter driver: <SCSI> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : TSSTcorp CD/DVDW SH-S182D atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD1200JD-00HBB0 atapi Port 2 ID 0 DMA: On
DiskPeripheral : WDC WD3200JS-00PDB0 atapi Port 3 ID 0 DMA: On
CdRomPeripheral : PZ5044H TDM376G 1.0 amtndx4f Port 6 ID 0 DMA: Off

=== CDRom-Device-Map ===
TSSTcorp CD/DVDW SH-S182D F: CDRom0
PZ5044H TDM376G G: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1023MB (1048044kB)
Free physical memory: 599MB (613812kB)
Memory in use : 41 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

12.5.2007
CD-ROM (ISO)
19:58:10 #1 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

19:58:11 #2 Text 0 File Isodoc.cpp, Line 6527
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : FALSE
Finalize CD : FALSE
Multisession : FALSE
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

19:58:11 #3 Text 0 File Burncd.cpp, Line 3163
TSSTcorp CD/DVDW SH-S182D
Super Link activated

19:58:11 #4 ISO9660GEN -11 File Geniso.cpp, Line 3334
First writeable address = 0 (0x00000000)

19:58:11 #5 Text 0 File Burncd.cpp, Line 3465
Turn on Track-At-Once, using CD-R/RW media

19:58:36 #6 Text 0 File DlgWaitCD.cpp, Line 306
Last possible write address on media: 359844 ( 79:59.69)
Last address to be written: 19741 ( 4:25.16)

19:58:36 #7 Text 0 File DlgWaitCD.cpp, Line 318
Write in overburning mode: NO (enabled: CD)

19:58:36 #8 Text 0 File DlgWaitCD.cpp, Line 2912
Recorder: TSSTcorp CD/DVDW SH-S182D;
CDR code: 00 97 15 17; OSJ entry from: Ritek Co.
ATIP Data:
Special Info [hex] 1: C0 00 90, 2: 61 0F 11 (LI 97:15.17), 3: 4F 3B 46 (LO 79:59.70)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)

19:58:36 #9 Text 0 File DlgWaitCD.cpp, Line 490
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert a disc for simulation.
(Medium in drive: Unknown. Medium required by compilation: CD-R/RW.)

19:58:36 #10 Text 0 File ThreadedTransferInterface.cpp, Line 823
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 19742 (19742) = #19742/4:23.17
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 19740 blocks [F: TSSTcorp CD/DVDW SH-S182D]
--------------------------------------------------------------

19:58:36 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1026
Prepare [F: TSSTcorp CD/DVDW SH-S182D] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 40738816, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
-150 | 1 | 0 | 0x41 | 19742 | -150 | 0x00
0 | 1 | 1 | 0x41 | 19742 | 0 | 0x00
19742 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

19:58:36 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1097
Removed 2 run-out blocks from end of track 1. Length: 19742 -> 19740.

19:58:36 #13 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

19:58:36 #14 Phase 24 File dlgbrnst.cpp, Line 1760
Caching of files started

19:58:36 #15 Text 0 File Burncd.cpp, Line 4298
Cache writing successful.

19:58:36 #16 Phase 25 File dlgbrnst.cpp, Line 1760
Caching of files completed

19:58:36 #17 Phase 32 File dlgbrnst.cpp, Line 1760
Simulation started at 48x (7 200 KB/s)

19:58:36 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2764
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

19:58:36 #19 Text 0 File MMC.cpp, Line 22250
Set BUFE: Super Link -> ON

19:58:37 #20 SPTI -1502 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1502)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x08
Sense Qual: 0x03
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 0A 00 00 00 00 08 03
Buffer x09bc0040: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

19:58:37 #21 CDR -1502 File Writer.cpp, Line 301
DMA-driver error, CRC error
F: TSSTcorp CD/DVDW SH-S182D

19:58:48 #22 CDR -201 File WriterStatus.cpp, Line 152
Invalid write state
F: TSSTcorp CD/DVDW SH-S182D

19:58:48 #23 TRANSFER -18 File WriterStatus.cpp, Line 152
Could not perform EndTrack

19:58:48 #24 Phase 34 File dlgbrnst.cpp, Line 1760
Simulation failed at 48x (7 200 KB/s)

19:58:48 #25 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

19:58:50 #26 Text 0 File Cdrdrv.cpp, Line 10529
DriveLocker: UnLockVolume completed

19:58:50 #27 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

mxr · 12-05-2007

I tried also changing from master to slave (it is the only IDE device on that cable) + also changed the cables and all I got was a different Nero error - Reset occured

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
System does not allow me to burn dvds anymore	tyroptimus prime	General Hardware Forum	14	13-09-2007 09:53
Hidden system files show up in burn	bkf	Burning Software	0	15-10-2004 14:11
burn: operating system and program for burn.	f@n_online	LiteOn / PLDS / Sony Writer	2	24-08-2004 13:50
System locks/hangs after burn.	taichiandy	Newbie Forum	3	24-04-2004 21:52
system speed during burn	mabbasc	Newbie Forum	6	05-03-2003 09:46

12-05-2007	#1
mxr New on Forum Join Date: Jan 2007 Posts: 6	Can't burn or can burn but not read on same system Well, as the thread says I have a problem. Yes, it has been discussed a lot in the forums but I haven't found a solution to this problem yet. Basically it goes like this - there have been issues that I can't burn DVDs or CDs at all - process does not even start and fails right in the beginning or I can burn but it is not readable on the burner who burnt it but it is recognized in other drives and systems fine. I am writing here in general hardware because this issue was with 3 different drives on 3 different systems. The common thing though is Nero which has disappointed me a lot recently. Either way, same burner on a linux system burnt my DVD images perfectly and read them too. I tried firmware upgrades, Nero removal, force ASPI, IDE drivers, checked for proper DMA settings, changed media, checked power supply voltages etc., etc. but problem remains. So I guess it is very much software side related. By the way this issue kept appearing on a TSST notebook drive, on a TSST SH-S182 and a older Pioneer A06.

Today
Mr. Adbot Register to remove me Join Date: Today Location: Myce HQ Posts: Zillions

12-05-2007	#2
mxr New on Forum Join Date: Jan 2007 Posts: 6	Re: Can't burn or can burn but not read on same system Windows XP 5.1 IA32 WinAspi: - NT-SPTI used Nero Version: 7.7.5.1 Internal Version: 7, 7, 5, 1 Recorder: <PIONEER DVD-RW DVR-106D>Version: 1.08 - HA 1 TA 0 - 7.7.5.1 Adapter driver: <IDE> HA 1 Drive buffer : 2000kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <PZ5044H TDM376G >Version: 1.0 - HA 1 TA 1 - 7.7.5.1 Adapter driver: <SCSI> HA 1 === Scsi-Device-Map === CdRomPeripheral : PIONEER DVD-RW DVR-106D atapi Port 0 ID 0 DMA: On DiskPeripheral : WDC WD1200JD-00HBB0 atapi Port 2 ID 0 DMA: On DiskPeripheral : WDC WD3200JS-00PDB0 atapi Port 3 ID 0 DMA: On CdRomPeripheral : PZ5044H TDM376G 1.0 atbu7b6d Port 6 ID 0 DMA: Off === CDRom-Device-Map === PIONEER DVD-RW DVR-106D F: CDRom0 PZ5044H TDM376G G: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 1023MB (1048044kB) Free physical memory: 528MB (541616kB) Memory in use : 48 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 12.5.2007 Audio CD 19:51:30 #1 Text 0 File SCSIPTICommands.cpp, Line 411 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 19:51:30 #2 CDADOC -1 File Cdadoc.cpp, Line 1639 Audio item log info: Audio document burn settings: ============================= Burn mode: DAO, CD Text: On, Cache disk or network files: No, Cache small files: No, Cache files smaller than 65536 bytes. Audio Multisession: No List of audio tracks: ===================== Track 01: Length: 79:28.21, Pause frames: 150, Filters: 0, Name: '02_va_-_house_top_100_vol.7.mp3'. Total size: 79:30.21 19:51:30 #3 Text 0 File Burncd.cpp, Line 3163 PIONEER DVD-RW DVR-106D Buffer underrun protection activated 19:51:30 #4 Text 0 File AudioCompilationImpl.cpp, Line 838 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 19:51:30 #5 Text 0 File Burncd.cpp, Line 3465 Turn on Disc-At-Once, using CD-R/RW media 19:51:33 #6 Text 0 File DlgWaitCD.cpp, Line 306 Last possible write address on media: 359844 ( 79:59.69) Last address to be written: 357620 ( 79:30.20) 19:51:33 #7 Text 0 File DlgWaitCD.cpp, Line 318 Write in overburning mode: NO (enabled: CD) 19:51:33 #8 Text 0 File DlgWaitCD.cpp, Line 2912 Recorder: PIONEER DVD-RW DVR-106D; CDR code: 00 97 15 17; OSJ entry from: Ritek Co. ATIP Data: Special Info [hex] 1: C0 00 90, 2: 61 0F 11 (LI 97:15.17), 3: 4F 3B 46 (LO 79:59.70) Additional Info [hex] 1: FF FF FF (invalid), 2: FF FF FF (invalid), 3: FF FF FF (invalid) 19:51:33 #9 Text 0 File DlgWaitCD.cpp, Line 490 >>> Protocol of DlgWaitCD activities: <<< ========================================= 19:51:33 #10 Text 0 File ThreadedTransferInterface.cpp, Line 823 Setup items (after recorder preparation) 0: TRM_AUDIO_NOPRE (02_va_-_house_top_100_vol.7.mp3) 2 indices, index0 (150) not provided original disc pos #0 + 357621 (357621) = #357621/79:28.21 relocatable, disc pos for caching/writing not required/not required -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 357621 blocks [F: PIONEER DVD-RW DVR-106D] -------------------------------------------------------------- 19:51:33 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1026 Prepare [F: PIONEER DVD-RW DVR-106D] for write in CUE-sheet-DAO DAO infos: ========== MCN: "†††††† Āā" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 0 352800 841477392, ISRC "" DAO layout: =========== ___Start_\|____Track_\|_Idx_\|_CtrlAdr_\|_____Size_\|______NWA_\|_RecDep__________ -150 \| lead-in \| 0 \| 0x01 \| 0 \| 0 \| 0x00 -150 \| 1 \| 0 \| 0x21 \| 357621 \| -150 \| 0x00 0 \| 1 \| 1 \| 0x21 \| 357621 \| 0 \| 0x00 357621 \| lead-out \| 1 \| 0x01 \| 0 \| 0 \| 0x00 19:51:33 #12 Text 0 File SCSIPTICommands.cpp, Line 209 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 19:51:33 #13 Phase 32 File dlgbrnst.cpp, Line 1760 Simulation started at 16x (2 400 KB/s) 19:51:34 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2764 Verifying disc position of item 0 (relocatable, no disc pos, no patch infos, orig at #0): write at #0 19:51:36 #15 Text 0 File MMC.cpp, Line 17582 StartDAO : CD-Text - On 19:51:36 #16 Text 0 File MMC.cpp, Line 22250 Set BUFE: Buffer underrun protection -> ON 19:52:35 #17 Text 0 File MMC.cpp, Line 17812 CueData, Len=32 01 00 00 41 00 00 00 00 01 01 00 00 00 00 00 00 01 01 01 00 00 00 02 00 01 aa 01 01 00 4f 1e 15 19:52:38 #18 SPTI -1142 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1142) Sense Key: 0x04 (KEY_HARDWARE_ERROR) Sense Code: 0x1B Sense Qual: 0x00 CDB Data: 0x2A 00 FF FF CF 24 00 02 AA 00 00 00 Sense Area: 0x70 00 04 00 00 00 00 0E 00 00 00 00 1B Buffer x06896400: Len xffc0 0x20 00 00 00 00 00 01 08 1B 37 15 33 19 12 01 14 0x1B 37 00 20 0C 1B 38 3C 20 00 04 01 02 33 00 30 0x08 05 19 2F 1B 02 38 37 00 00 00 00 00 04 11 23 19:52:38 #19 CDR -1142 File Writer.cpp, Line 301 Synchronous data transfer error F: PIONEER DVD-RW DVR-106D 19:52:38 #20 Phase 34 File dlgbrnst.cpp, Line 1760 Simulation failed at 16x (2 400 KB/s) 19:52:38 #21 Text 0 File AudioCompilationImpl.cpp, Line 863 DRM: DRM burn session terminated. 19:52:38 #22 Text 0 File AudioCompilationImpl.cpp, Line 892 DRM: Closing entire DRM handling. Bye. 19:52:38 #23 Text 0 File SCSIPTICommands.cpp, Line 254 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 19:52:43 #24 Text 0 File Cdrdrv.cpp, Line 10529 DriveLocker: UnLockVolume completed 19:52:43 #25 Text 0 File SCSIPTICommands.cpp, Line 411 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Today
Adbot Always the best offers Join Date: Today Location: Myce HQ Posts: Zillions