LG GCC 4482 B is recently a little slow.

CD and DVD Writers Discuss, LG GCC 4482 B is recently a little slow. at Computer Hardware forum; My factory-installed CDRW/DVD rom LG GCC 4482 B is recently a little slow. It's ide controller advanced setting as device 0 on primary ide channel 1 is Ultra DMA mode 2. I do not know if this has always been its setting, nor if that is supposed to be the

Posted: 21-04-2008

chosenfew777 (MyCE Senior Member): Posts: 515

My factory-installed CDRW/DVD rom LG GCC 4482 B is recently a little slow.
It's ide controller advanced setting as device 0 on primary ide channel 1 is Ultra DMA mode 2.
I do not know if this has always been its setting, nor if that is supposed to be the correct setting for it.
I've deleted & re-installed them, as well as the prim. & sec. IDE channels in Dev. manager, & Windows re-installed them on reboot.
It used to read & write CD-R's MUCH faster. I've used Verbatims, Philips, Sony, Memorex 48X or 52X & they all would write anywhere from 35 - 42X.
Is there any way to to get it to a higher Ultra DMA mode? Could its firmware need reflashing? My LG GSA H55N - device 1 on same IDE channel - is currently running @ UDMA mode 4. Dell online support doesn't have ANYTHING on this drive that I could find.
Nero info tools (came w/ Essentials 7) shows it as a combo drive (correct), but with:
Read speed: 15X (No other choice - should be 48X)
Write sdpeed: 8X or 16X (Only 2 choices - should be 48X)
Firmware vers. is E107
Buffer size: 1536 KB
PC: See sign.
XP Home (Dell Vers.) w/SP 2
Dell. Inc. Phoenix Rom Bios Plus Vers. 1.10A04
Dell motherboard: OJC474
512 MB Ram
I use Nero 7 Essentials for CD burning.
One more thing. Does the LG GCC 4482 B have a 6 X riplock on it like the H55N?
Any help would be greatly appreciated!I use Nero 7 Essentials for CD burning.

__________________
My PC is:
a black one.

Apps. I use:
not the ones I don't use...

Don't worry if you're a kleptomaniac, you can always take something for it.

Go Ahead...Have a laugh! > http://www.youtube.com/watch?v=gITr1alPvD4

30 Rock-Fwd & back again...
http://www.youtube.com/watch?v=ofsbJzOt_AY&NR=1
http://www.youtube.com/watch?v=fYuQHNQ_BHY

Quote and reply

Today (MyCE Staff): Posts: 15,596

Posted: 21-04-2008

bjkg (MyCE Resident): Posts: 3,547

@ chosenfew777,

I believe your LG GCC-4482B vE107 Firmware is old out dated. I believe LG GCC-4482B vE114 Firmware is the newest most current up to date Firmware ->

http://forum.rpc1.org/dl_firmware.php?download_id=2383

ftp://ftp.us.dell.com/rmsd/E114.zip

Regards,
bjkg

Quote and reply

Posted: 21-04-2008

chosenfew777 (MyCE Senior Member): Posts: 515

Quote:

Originally Posted by bjkg

Many thanx for the quick response!
I've downloaded it & unzipped it to my desktop for the moment.
I sure would appreciate a quick tutorial on how to safely flash the drive.
Ex: Do I need to unplug my LG H55N's IDE connector to prevent cross-flashing?
Or can I temporarily remove it in Dev. Mgr. until I'm done?
Or is it as simple as making sure the "Target Device" is set to GCC 4482 & clicking the upgrade (Go) button.
I just got my GSA H55N working right & don't wanna mess that up.
Am I being too paranoid? (lol)
Both are on same IDE cable & share Prim. IDE channel.
Both are jumpered in Cable Select mode.
GCC 4482 is dev. 0.
GSA H55N is dev. 1