IDE-to-SATA converter for optical drive?
| CD, DVD and Blu-ray Writers Discuss, IDE-to-SATA converter for optical drive? at Hardware forum; Hi, Does the IDE-to-SATA converter work for a IDE DVD-ROM or DVD-writer? Since the mobo only have 1 IDE port or even 0 in the new ICH8 southbridge, we may have to convert the IDE CD/DVD-ROMs & writers to SATA connection. Is there a recommended converter in the SG market? |
-
Posted:
21-02-2006
- # 1
Hi,
Does the IDE-to-SATA converter work for a IDE DVD-ROM or DVD-writer?
Since the mobo only have 1 IDE port or even 0 in the new ICH8 southbridge, we may have to convert the IDE CD/DVD-ROMs & writers to SATA connection.
Is there a recommended converter in the SG market?
Thanks.__________________
Pri sys:
WinXP Pro SP2, 1GB RAM, P4E-3.0GHz
ODD: Asus E616P3 DVD-ROM, BenQ DW1620
U160 SCSI: 1x 18GB & 2x 36GB
Sec sys:
WinXP Pro Sp2, 768MB RAM, P3-850MHz
Asus E616P3 DVD-ROM (in GL811E-04/711 combo enclosure)
BenQ DW1640 (in PL3507C enclosure, using BEGB fw)
ALi Firewire+USB2 PCI combo
Office:
WinXP Pro Sp2, 1GB RAM, P4-1.7MHz
Fujitsu S6230 notebook
BenQ DW822A (in PL3507A enclosure)
- Today (MyCE Staff)
- Posts: 15,596
-
Posted:
21-02-2006
- # 3
Short answer is yes.
But unless you have chipset-based Intel SATA controllers, the chances are good that you will have problems, as many SATA controllers are not ATAPI friendly.
You may get reading and writing functionality, but no firmware flashing or working utilities like CDSpeed and others. It's worth a try, but keep your expectations low.
Visit the IDE controller thread in the hardware forum for more ideas on a PCI card. -
Posted:
22-02-2006
- # 5
Ok, points taken. Basically stay away from them. __________________
Pri sys:
WinXP Pro SP2, 1GB RAM, P4E-3.0GHz
ODD: Asus E616P3 DVD-ROM, BenQ DW1620
U160 SCSI: 1x 18GB & 2x 36GB
Sec sys:
WinXP Pro Sp2, 768MB RAM, P3-850MHz
Asus E616P3 DVD-ROM (in GL811E-04/711 combo enclosure)
BenQ DW1640 (in PL3507C enclosure, using BEGB fw)
ALi Firewire+USB2 PCI combo
Office:
WinXP Pro Sp2, 1GB RAM, P4-1.7MHz
Fujitsu S6230 notebook
BenQ DW822A (in PL3507A enclosure)
-
Posted:
22-02-2006
- # 6
You would be better off with a proven external enclosure based on teh Prolific 3507 chipset or possibly, the ne Cypress chip.
http://www.dealsonic.com/plpmblcousb22.html__________________
Still a few bugs in the system...
People who found this also searched for
- ata to sata diy
- connecting sata cd rom to ide interface
- convert ide drive to sata
- convert ide dvd
- convert ide dvd rom to scsi dvd rom
- convert ide dvd to sata
- convert ide to sata dvd
- convert ide to sata dvdrom diy
- converter ide sata dvd
- converter ide sata dvd+r
- dvd drive ide sata
- dvd ide to sata adapter
- dvd ide to sata adapter setup
- dvd ide to sata converter
- dvd pata to sata converter
- dvd rom sata to ide
- dvd sata adapter
- ide cd drive sata
- ide cd drive to sata
- ide converter to sata for dvd
- ide dvd am s-ata adapter
- ide dvd naar sata
- ide dvdrom to sata motherboard
- ide optical drive convert to sata optical drive
- ide optical drive to connect sata 2
- ide sata adapter dvd
- ide sata adapter dvd writer
- ide sata converter help
- ide to dvd

