Please Help: HP Pavilion a1516in -- Writing DVD's fail with NERO after firmware upgrade.
| CD and DVD Writers Discuss, HP Pavilion a1516in -- Writing DVD's fail with NERO after firmware upgrade. at Computer Hardware forum; Hi, I have HP Pavilion a1516in. Problem is I'm not able to write DVD's after firmware upgrade of DVD Writer with NERO 6.6 I have tried various media types TDK, Sony etc. But the problem persists. I have enabled DMA as given in forum. DVD Burner --> HL-DT-ST DVDRRW GSA-H20L |
| Hi, I have HP Pavilion a1516in. Problem is I'm not able to write DVD's after firmware upgrade of DVD Writer with NERO 6.6 I have tried various media types TDK, Sony etc. But the problem persists. I have enabled DMA as given in forum. DVD Burner --> HL-DT-ST DVDRRW GSA-H20L . Latest firmware S583. Is there a way to solve the problem. How can I restore the original firmware. Attached is the Nero Log ********LOG Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/28/2004 4:51:12 PM Nero version: 6.6.0.1 (Nero Express) Recorder: Adapter driver: Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: Std. MMC recorder CD-ROM: Adapter driver: === Scsi-Device-Map === DiskPeripheral : ST3160812AS atapi Port 2 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVDRRW GSA-H20L atapi Port 5 ID 0 DMA: Off === CDRom-Device-Map === HL-DT-ST DVDRRW GSA-H20L E: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 959MB (982316kB) Free physical memory: 334MB (342896kB) Memory in use : 65 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 6.10.2008 ISO compilation 9:56:51 AM #1 Text 0 File Isodoc.cpp, Line 6165 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 9:56:51 AM #2 Text 0 File Reader.cpp, Line 127 Reader running 9:56:51 AM #3 Text 0 File Writer.cpp, Line 122 Writer HL-DT-ST DVDRRW GSA-H20L running 9:56:51 AM #4 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 9:56:51 AM #5 Text 0 File Burncd.cpp, Line 3117 Turn on Disc-at-once, using DVD media 9:56:51 AM #6 Text 0 File DlgWaitCD.cpp, Line 256 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2167039 (481:33.64, 4232MB) 9:56:51 AM #7 Text 0 File DlgWaitCD.cpp, Line 268 Write in overburning mode: NO (enabled: CD) 9:56:51 AM #8 Text 0 File DlgWaitCD.cpp, Line 2309 Recorder: HL-DT-ST DVDRRW GSA-H20L, Media type: DVD-R Disc Manufacturer: SONY16 - D1 Disc Application Code: 64, Disc Physical Code: 193 9:56:51 AM #9 Text 0 File DlgWaitCD.cpp, Line 430 >>> Protocol of DlgWaitCD activities: <<< ========================================= 9:56:51 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 844 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2167040 (2167040) = #2167040/481:33.65 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2167040 blocks [HL-DT-ST DVDRRW GSA-H20L] -------------------------------------------------------------- 9:56:53 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1047 Prepare recorder [HL-DT-ST DVDRRW GSA-H20L] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4438097920, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 2167040 | lead-out | 1 | 0x00 | 0x41 9:56:54 AM #12 Phase 24 File dlgbrnst.cpp, Line 1853 Caching of files started 9:56:54 AM #13 Text 0 File Burncd.cpp, Line 4003 Cache writing successful. 9:56:54 AM #14 Phase 25 File dlgbrnst.cpp, Line 1853 Caching of files completed 9:56:54 AM #15 Phase 36 File dlgbrnst.cpp, Line 1853 Burn process started at 4x (5,540 KB/s) 9:56:54 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2497 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 9:56:54 AM #17 Text 0 File dlgbrnst.cpp, Line 1711 Set remaining time: 13:27,287 (807287ms) -> OK 9:56:54 AM #18 Text 0 File DVDR.cpp, Line 2027 Recording mode: Sequential Recording Mode for Multisession 9:56:54 AM #19 Text 0 File Mmc.cpp, Line 20673 Set BUFE: Buffer underrun protection -> ON 9:56:54 AM #20 Text 0 File DVDR.cpp, Line 2168 Start write address at LBA 0 DVD high compatibility mode: Yes 9:56:54 AM #21 Text 0 File Cdrdrv.cpp, Line 8281 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 10:23:11 AM #22 SCSI -1093 File Cdrdrv.cpp, Line 1432 SCSI Exec, HA 5, TA 0, LUN 0, buffer 0x05F70000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x02 Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x09 0xC7 0x80 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0E 0x00 0x00 0x00 0x00 0x02 0x00 10:23:11 AM #23 CDR -1093 File Writer.cpp, Line 311 No seek complete 10:23:11 AM #24 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 10:23:11 AM #25 Text 0 File ThreadedTransfer.cpp, Line 223 conversion idle, stopping reader 10:23:11 AM #26 Text 0 File DVDR.cpp, Line 2410 EndDAO: Last written address was 640895 10:23:11 AM #27 Phase 133 File dlgbrnst.cpp, Line 1853 Writing short lead-out 10:24:19 AM #28 Text 0 File dlgbrnst.cpp, Line 1711 Set remaining time: 0:00,000 (0ms) -> OK 10:24:19 AM #29 Text 0 File dlgbrnst.cpp, Line 1711 Set remaining time: 0:00,000 (0ms) -> OK 10:24:19 AM #30 Phase 38 File dlgbrnst.cpp, Line 1853 Burn process failed at 4x (5,540 KB/s) Existing drivers: File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 8/19/2005 5:30:00 AM File 'Drivers\PXHELP20.SYS': Ver=3.00.20a, size=46080 bytes, created 3/9/2006 11:30:00 PM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 1:29:44 AM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) Last edited by vicky271075; 06-10-2008 at 20:17. Reason: Need to add info |
- Today (MyCE Staff)
- Posts: 15,596
| |
| ****Another LOG from a failed instance****** Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/28/2004 4:51:12 PM Nero version: 6.6.0.1 ( Nero Express) Recorder: Adapter driver: Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: Std. MMC recorder CD-ROM: Adapter driver: === Scsi-Device-Map === DiskPeripheral : ST3160812AS atapi Port 2 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVDRRW GSA-H20L atapi Port 5 ID 0 DMA: Off === CDRom-Device-Map === HL-DT-ST DVDRRW GSA-H20L E: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 959MB (982316kB) Free physical memory: 236MB (241936kB) Memory in use : 75 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 6.10.2008 ISO compilation 8:42:23 AM #1 Text 0 File Isodoc.cpp, Line 6165 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 8:42:23 AM #2 Text 0 File Reader.cpp, Line 127 Reader running 8:42:23 AM #3 Text 0 File Writer.cpp, Line 122 Writer HL-DT-ST DVDRRW GSA-H20L running 8:42:24 AM #4 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 8:42:24 AM #5 Text 0 File Burncd.cpp, Line 3117 Turn on Disc-at-once, using DVD media 8:42:24 AM #6 Text 0 File DlgWaitCD.cpp, Line 256 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2167039 (481:33.64, 4232MB) 8:42:24 AM #7 Text 0 File DlgWaitCD.cpp, Line 268 Write in overburning mode: NO (enabled: CD) 8:42:24 AM #8 Text 0 File DlgWaitCD.cpp, Line 2309 Recorder: HL-DT-ST DVDRRW GSA-H20L, Media type: DVD-R Disc Manufacturer: SONY16 - D1 Disc Application Code: 64, Disc Physical Code: 193 8:42:24 AM #9 Text 0 File DlgWaitCD.cpp, Line 430 >>> Protocol of DlgWaitCD activities: <<< ========================================= 8:42:24 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 844 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2167040 (2167040) = #2167040/481:33.65 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2167040 blocks [HL-DT-ST DVDRRW GSA-H20L] -------------------------------------------------------------- 8:42:27 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1047 Prepare recorder [HL-DT-ST DVDRRW GSA-H20L] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4438097920, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 2167040 | lead-out | 1 | 0x00 | 0x41 8:42:27 AM #12 Phase 24 File dlgbrnst.cpp, Line 1853 Caching of files started 8:42:28 AM #13 Text 0 File Burncd.cpp, Line 4003 Cache writing successful. 8:42:28 AM #14 Phase 25 File dlgbrnst.cpp, Line 1853 Caching of files completed 8:42:28 AM #15 Phase 36 File dlgbrnst.cpp, Line 1853 Burn process started at 16x (22,160 KB/s) 8:42:28 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2497 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 8:42:28 AM #17 Text 0 File dlgbrnst.cpp, Line 1711 Set remaining time: 3:25,571 (205571ms) -> OK 8:42:28 AM #18 Text 0 File DVDR.cpp, Line 2027 Recording mode: Sequential Recording Mode for Multisession 8:42:28 AM #19 Text 0 File Mmc.cpp, Line 20673 Set BUFE: Buffer underrun protection -> ON 8:42:28 AM #20 Text 0 File DVDR.cpp, Line 2168 Start write address at LBA 0 DVD high compatibility mode: Yes 8:42:28 AM #21 Text 0 File Cdrdrv.cpp, Line 8281 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 8:43:33 AM #22 SCSI -1135 File Cdrdrv.cpp, Line 1432 SCSI Exec, HA 5, TA 0, LUN 0, buffer 0x0B230000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x80 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0E 0x00 0x00 0x00 0x00 0x0C 0x80 8:43:33 AM #23 CDR -1135 File Writer.cpp, Line 311 Write error 8:43:33 AM #24 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 8:43:33 AM #25 Text 0 File ThreadedTransfer.cpp, Line 223 conversion idle, stopping reader 8:43:33 AM #26 Text 0 File DVDR.cpp, Line 2410 EndDAO: Last written address was -1 8:43:33 AM #27 Phase 133 File dlgbrnst.cpp, Line 1853 Writing short lead-out 8:45:16 AM #28 SCSI -1135 File Cdrdrv.cpp, Line 1178 SCSI Exec, HA 5, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x80 CDB Data: 0x5B 0x01 0x01 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0E 0x00 0x00 0x00 0x00 0x0C 0x80 8:47:45 AM #29 SCSI -1135 File Cdrdrv.cpp, Line 1178 SCSI Exec, HA 5, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x80 CDB Data: 0x5B 0x01 0x01 0x00 0x00 0x02 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0E 0x00 0x00 0x00 0x00 0x0C 0x80 8:49:36 AM #30 SCSI -1135 File Cdrdrv.cpp, Line 1178 SCSI Exec, HA 5, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x80 CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x03 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0E 0x00 0x00 0x00 0x00 0x0C 0x80 8:49:36 AM #31 Text 0 File dlgbrnst.cpp, Line 1711 Set remaining time: 0:00,000 (0ms) -> OK 8:49:36 AM #32 CDR -1135 File WriterStatus.cpp, Line 167 Write error 8:49:36 AM #33 TRANSFER -24 File WriterStatus.cpp, Line 167 Could not perform end of Disc-at-once 8:49:36 AM #34 Text 0 File dlgbrnst.cpp, Line 1711 Set remaining time: 0:00,000 (0ms) -> OK 8:49:36 AM #35 Phase 38 File dlgbrnst.cpp, Line 1853 Burn process failed at 16x (22,160 KB/s) Existing drivers: File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 8/19/2005 5:30:00 AM File 'Drivers\PXHELP20.SYS': Ver=3.00.20a, size=46080 bytes, created 3/9/2006 11:30:00 PM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 1:29:44 AM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) |
| ***3rd LOG**** Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/28/2004 4:51:12 PM Nero version: 6.6.0.1 Recorder: Adapter driver: Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: Std. MMC recorder CD-ROM: Adapter driver: === Scsi-Device-Map === DiskPeripheral : ST3160812AS atapi Port 2 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVDRRW GSA-H20L atapi Port 5 ID 0 DMA: Off === CDRom-Device-Map === HL-DT-ST DVDRRW GSA-H20L E: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 959MB (982316kB) Free physical memory: 239MB (244840kB) Memory in use : 75 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 6.10.2008 ISO compilation 8:37:46 AM #1 Text 0 File Isodoc.cpp, Line 6165 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 8:37:46 AM #2 Text 0 File Reader.cpp, Line 127 Reader running 8:37:46 AM #3 Text 0 File Writer.cpp, Line 122 Writer HL-DT-ST DVDRRW GSA-H20L running 8:37:46 AM #4 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 8:37:46 AM #5 Text 0 File Burncd.cpp, Line 3117 Turn on Disc-at-once, using DVD media 8:37:47 AM #6 Text 0 File DlgWaitCD.cpp, Line 256 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2167039 (481:33.64, 4232MB) 8:37:47 AM #7 Text 0 File DlgWaitCD.cpp, Line 268 Write in overburning mode: NO (enabled: CD) 8:37:47 AM #8 Text 0 File DlgWaitCD.cpp, Line 2309 Recorder: HL-DT-ST DVDRRW GSA-H20L, Media type: DVD-R Disc Manufacturer: SONY16 - D1 Disc Application Code: 64, Disc Physical Code: 193 8:37:47 AM #9 Text 0 File DlgWaitCD.cpp, Line 430 >>> Protocol of DlgWaitCD activities: <<< ========================================= 8:37:47 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 844 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2167040 (2167040) = #2167040/481:33.65 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2167040 blocks [HL-DT-ST DVDRRW GSA-H20L] -------------------------------------------------------------- 8:38:13 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1047 Prepare recorder [HL-DT-ST DVDRRW GSA-H20L] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4438097920, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 2167040 | lead-out | 1 | 0x00 | 0x41 8:38:13 AM #12 Phase 24 File dlgbrnst.cpp, Line 1853 Caching of files started 8:38:13 AM #13 Text 0 File Burncd.cpp, Line 4003 Cache writing successful. 8:38:13 AM #14 Phase 25 File dlgbrnst.cpp, Line 1853 Caching of files completed 8:38:13 AM #15 Phase 36 File dlgbrnst.cpp, Line 1853 Burn process started at 12x (16,620 KB/s) 8:38:13 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2497 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 8:38:13 AM #17 Text 0 File dlgbrnst.cpp, Line 1711 Set remaining time: 4:32,429 (272429ms) -> OK 8:38:13 AM #18 Text 0 File DVDR.cpp, Line 2027 Recording mode: Sequential Recording Mode 8:38:13 AM #19 Text 0 File Mmc.cpp, Line 20673 Set BUFE: Buffer underrun protection -> ON 8:38:13 AM #20 Text 0 File DVDR.cpp, Line 2168 Start write address at LBA 0 DVD high compatibility mode: Yes 8:38:13 AM #21 Text 0 File Cdrdrv.cpp, Line 8281 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 8:40:56 AM #22 SCSI -1135 File Cdrdrv.cpp, Line 1432 SCSI Exec, HA 5, TA 0, LUN 0, buffer 0x05F50000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x80 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0E 0x00 0x00 0x00 0x00 0x0C 0x80 8:40:56 AM #23 CDR -1135 File Writer.cpp, Line 311 Write error 8:40:56 AM #24 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 8:40:57 AM #25 Text 0 File ThreadedTransfer.cpp, Line 223 conversion idle, stopping reader 8:40:57 AM #26 Text 0 File DVDR.cpp, Line 2410 EndDAO: Last written address was -1 8:40:57 AM #27 Text 0 File dlgbrnst.cpp, Line 1711 Set remaining time: 0:00,000 (0ms) -> OK 8:40:57 AM #28 Text 0 File dlgbrnst.cpp, Line 1711 Set remaining time: 0:00,000 (0ms) -> OK 8:40:57 AM #29 Phase 38 File dlgbrnst.cpp, Line 1853 Burn process failed at 12x (16,620 KB/s) Existing drivers: File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 8/19/2005 5:30:00 AM File 'Drivers\PXHELP20.SYS': Ver=3.00.20a, size=46080 bytes, created 3/9/2006 11:30:00 PM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 1:29:44 AM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) |
| Hello vicky271075, welcome to CDF  Thanks for posting the logs! It looks like DMA is still disabled for your LG burner - follow the link in my signature ("How to check/enable DMA"), and follow the instructions for your version of Windows. Or. Download and run the "resetdma.vbs" file in this post - if it finds any channels that still need resetting, it'll do it then ask you for a reboot. The second option is much quicker, I've used the file before on my mum's PC 
__________________ Current drives: Samsung SH-S223F (SB03 RPC1 + other goodies) + TSST (Samsung) TS-H653F (D200) + Samsung SH-S203N (SB02 RPC1 + other goodies) + Optiarc AD-5170S (1.12) + Litey LH-20A1H (LL0D) + Samsung SH-S182D (SB06 RPC1) x2 + LG E10N (JE07) + BenQ DW1650 (BCDC) + BenQ DW1640@164B (BEFB) + LG 4167B (DL13 TDB) + NEC ND-4551A (1.Z2) + LG GCE-8520B (1.00) + LiteOn SOHR-5239S (2S0B) Retired: LiteOn LDW-851@SOHW-832 + LiteOn SOHW-1693S + LG 4163B + Pioneer DVR-115D My Review PCs How to delete your upper and lower filters : How to check/enable DMA by Womble Click here to join cdfreaks.com and be part of our friendly community!  The CDFreaks Distributed Computing Teams need YOU! Join the Team(s) and help save some lives! Read more here  |
| Actually these were the logs that were for DVD's before the DMA enabled. I have anabled it and now it gives the folllwoing error. DVD-R always fail. Here is the latest log Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/28/2004 4:51:12 PM Nero version: 6.6.0.1 ( Nero Express) Recorder: Adapter driver: Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: Std. MMC recorder CD-ROM: Adapter driver: === Scsi-Device-Map === DiskPeripheral : ST3160812AS atapi Port 2 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVDRRW GSA-H20L atapi Port 5 ID 0 DMA: On === CDRom-Device-Map === HL-DT-ST DVDRRW GSA-H20L E: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 959MB (982316kB) Free physical memory: 313MB (321260kB) Memory in use : 67 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 6.10.2008 ISO compilation 10:43:55 PM #1 Text 0 File Isodoc.cpp, Line 6165 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 10:43:55 PM #2 Text 0 File Reader.cpp, Line 127 Reader running 10:43:55 PM #3 Text 0 File Writer.cpp, Line 122 Writer HL-DT-ST DVDRRW GSA-H20L running 10:43:55 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 10:43:55 PM #5 Text 0 File Burncd.cpp, Line 3117 Turn on Disc-at-once, using DVD media 10:43:55 PM #6 Text 0 File DlgWaitCD.cpp, Line 256 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2167039 (481:33.64, 4232MB) 10:43:55 PM #7 Text 0 File DlgWaitCD.cpp, Line 268 Write in overburning mode: NO (enabled: CD) 10:43:55 PM #8 Text 0 File DlgWaitCD.cpp, Line 2309 Recorder: HL-DT-ST DVDRRW GSA-H20L, Media type: DVD-R Disc Manufacturer: SONY16 - D1 Disc Application Code: 64, Disc Physical Code: 193 10:43:55 PM #9 Text 0 File DlgWaitCD.cpp, Line 430 >>> Protocol of DlgWaitCD activities: <<< ========================================= 10:43:55 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 844 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2167040 (2167040) = #2167040/481:33.65 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2167040 blocks [HL-DT-ST DVDRRW GSA-H20L] -------------------------------------------------------------- 10:43:55 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1047 Prepare recorder [HL-DT-ST DVDRRW GSA-H20L] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4438097920, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 2167040 | lead-out | 1 | 0x00 | 0x41 10:43:56 PM #12 Phase 24 File dlgbrnst.cpp, Line 1853 Caching of files started 10:43:56 PM #13 Text 0 File Burncd.cpp, Line 4003 Cache writing successful. 10:43:56 PM #14 Phase 25 File dlgbrnst.cpp, Line 1853 Caching of files completed 10:43:56 PM #15 Phase 36 File dlgbrnst.cpp, Line 1853 Burn process started at 16x (22,160 KB/s) 10:43:56 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2497 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 10:43:56 PM #17 Text 0 File dlgbrnst.cpp, Line 1711 Set remaining time: 3:25,571 (205571ms) -> OK 10:43:56 PM #18 Text 0 File DVDR.cpp, Line 2027 Recording mode: Sequential Recording Mode 10:43:56 PM #19 Text 0 File Mmc.cpp, Line 20673 Set BUFE: Buffer underrun protection -> ON 10:43:56 PM #20 Text 0 File DVDR.cpp, Line 2168 Start write address at LBA 0 DVD high compatibility mode: Yes 10:43:56 PM #21 Text 0 File Cdrdrv.cpp, Line 8281 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 10:44:10 PM #22 SCSI -1064 File Cdrdrv.cpp, Line 1432 SCSI Exec, HA 5, TA 0, LUN 0, buffer 0x09490000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x21 Sense Qual: 0x02 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E 0x00 0x00 0x00 0x00 0x21 0x02 10:44:10 PM #23 CDR -1064 File Writer.cpp, Line 311 Invalid block address 10:44:10 PM #24 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 10:44:10 PM #25 Text 0 File ThreadedTransfer.cpp, Line 223 conversion idle, stopping reader 10:44:10 PM #26 Text 0 File DVDR.cpp, Line 2410 EndDAO: Last written address was -1 10:44:10 PM #27 Text 0 File dlgbrnst.cpp, Line 1711 Set remaining time: 0:00,000 (0ms) -> OK 10:44:10 PM #28 Text 0 File dlgbrnst.cpp, Line 1711 Set remaining time: 0:00,000 (0ms) -> OK 10:44:10 PM #29 Phase 38 File dlgbrnst.cpp, Line 1853 Burn process failed at 16x (22,160 KB/s) Existing drivers: File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 8/19/2005 5:30:00 AM File 'Drivers\PXHELP20.SYS': Ver=3.00.20a, size=46080 bytes, created 3/9/2006 11:30:00 PM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 1:29:44 AM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) |
| Another fail after DMA enabled *************************** Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 4:36:00 PM ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/28/2004 4:51:12 PM Nero version: 6.6.0.1 ( Nero Express) Recorder: Adapter driver: Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: Std. MMC recorder CD-ROM: Adapter driver: === Scsi-Device-Map === DiskPeripheral : ST3160812AS atapi Port 2 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVDRRW GSA-H20L atapi Port 5 ID 0 DMA: On === CDRom-Device-Map === HL-DT-ST DVDRRW GSA-H20L E: CDRom0 ======================= AutoRun : 0 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 959MB (982316kB) Free physical memory: 396MB (406484kB) Memory in use : 58 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 5.10.2008 ISO compilation 5:30:33 PM #1 Text 0 File Isodoc.cpp, Line 6165 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 5:30:33 PM #2 Text 0 File Reader.cpp, Line 127 Reader running 5:30:33 PM #3 Text 0 File Writer.cpp, Line 122 Writer HL-DT-ST DVDRRW GSA-H20L running 5:30:33 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 5:30:33 PM #5 Text 0 File Burncd.cpp, Line 3117 Turn on Disc-at-once, using DVD media 5:30:33 PM #6 Text 0 File DlgWaitCD.cpp, Line 256 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2088111 (464:01.36, 4078MB) 5:30:33 PM #7 Text 0 File DlgWaitCD.cpp, Line 268 Write in overburning mode: NO (enabled: CD) 5:30:33 PM #8 Text 0 File DlgWaitCD.cpp, Line 2309 Recorder: HL-DT-ST DVDRRW GSA-H20L, Media type: DVD-R Disc Manufacturer: CMC MA - G. AM3 Disc Application Code: 64, Disc Physical Code: 193 5:30:33 PM #9 Text 0 File DlgWaitCD.cpp, Line 430 >>> Protocol of DlgWaitCD activities: <<< ========================================= 5:30:33 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 844 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2088112 (2088112) = #2088112/464:1.37 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2088112 blocks [HL-DT-ST DVDRRW GSA-H20L] -------------------------------------------------------------- 5:30:33 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1047 Prepare recorder [HL-DT-ST DVDRRW GSA-H20L] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4276453376, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 2088112 | lead-out | 1 | 0x00 | 0x41 5:30:33 PM #12 Phase 24 File dlgbrnst.cpp, Line 1853 Caching of files started 5:30:33 PM #13 Text 0 File Burncd.cpp, Line 4003 Cache writing successful. 5:30:33 PM #14 Phase 25 File dlgbrnst.cpp, Line 1853 Caching of files completed 5:30:33 PM #15 Phase 36 File dlgbrnst.cpp, Line 1853 Burn process started at 16x (22,160 KB/s) 5:30:33 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2497 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 5:30:33 PM #17 Text 0 File dlgbrnst.cpp, Line 1711 Set remaining time: 3:18,448 (198448ms) -> OK 5:30:33 PM #18 Text 0 File DVDR.cpp, Line 2027 Recording mode: Sequential Recording Mode 5:30:33 PM #19 Text 0 File Mmc.cpp, Line 20673 Set BUFE: Buffer underrun protection -> ON 5:30:33 PM #20 Text 0 File DVDR.cpp, Line 2168 Start write address at LBA 0 DVD high compatibility mode: Yes 5:30:33 PM #21 Text 0 File Cdrdrv.cpp, Line 8281 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 5:33:54 PM #22 SCSI -1135 File Cdrdrv.cpp, Line 1432 SCSI Exec, HA 5, TA 0, LUN 0, buffer 0x05FC0000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x80 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0E 0x00 0x00 0x00 0x00 0x0C 0x80 5:33:54 PM #23 CDR -1135 File Writer.cpp, Line 311 Write error 5:33:54 PM #24 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 5:33:55 PM #25 Text 0 File ThreadedTransfer.cpp, Line 223 conversion idle, stopping reader 5:33:55 PM #26 Text 0 File DVDR.cpp, Line 2410 EndDAO: Last written address was -1 5:33:55 PM #27 Text 0 File dlgbrnst.cpp, Line 1711 Set remaining time: 0:00,000 (0ms) -> OK 5:33:55 PM #28 Text 0 File dlgbrnst.cpp, Line 1711 Set remaining time: 0:00,000 (0ms) -> OK 5:33:55 PM #29 Phase 38 File dlgbrnst.cpp, Line 1853 Burn process failed at 16x (22,160 KB/s) Existing drivers: File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 8/18/2005 10:30:00 PM File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 4:36:00 PM File 'Drivers\PXHELP20.SYS': Ver=3.00.20a, size=46080 bytes, created 3/9/2006 4:30:00 PM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.5512 (xpsp.080413-2108), size=96512 bytes, created 4/14/2008 12:10:30 AM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) |
| Tried lower burn speeds? Something like 12x or 8x. Also, 6.6.0.1 is an older version of Nero, might be worth updating to the latest version of Nero 6.
__________________ Current drives: Samsung SH-S223F (SB03 RPC1 + other goodies) + TSST (Samsung) TS-H653F (D200) + Samsung SH-S203N (SB02 RPC1 + other goodies) + Optiarc AD-5170S (1.12) + Litey LH-20A1H (LL0D) + Samsung SH-S182D (SB06 RPC1) x2 + LG E10N (JE07) + BenQ DW1650 (BCDC) + BenQ DW1640@164B (BEFB) + LG 4167B (DL13 TDB) + NEC ND-4551A (1.Z2) + LG GCE-8520B (1.00) + LiteOn SOHR-5239S (2S0B) Retired: LiteOn LDW-851@SOHW-832 + LiteOn SOHW-1693S + LG 4163B + Pioneer DVR-115D My Review PCs How to delete your upper and lower filters : How to check/enable DMA by Womble Click here to join cdfreaks.com and be part of our friendly community! The CDFreaks Distributed Computing Teams need YOU! Join the Team(s) and help save some lives! Read more here |
There's more to MyCE.com
Listen up, we've got more. Product information on 102,541 products. Our experts have written 521 articles. We've gathered 16,068 news items for you to always keep updated.
Active Commenters
Posting Rules
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
People who found this also searched for
- dvd manufacturer for hp pavilion
- hp pavilion a1516in drivers download for free
- hp pavilion a1516in drivers for windows 7
- vga adapter driver for hp pavillion a1516in
