Component MSCOMCTL.OCX or one of its denpendencies is not registered : A FILE IS MISSING OR INVALID

baitfish18 · 04-07-2012

hi guys, i need help on the above problem mention, also i try to inspect which kelly taught all this came out(look at below). What went wrong when i download the rebuilder from their official site?
Windows Version: 6.1 [7601]
- AVISYNTH Version: [UNKNOWN], not recommended version
- HAALI Splitter: Not installed
- FFDSHOW doesn't appear to be installed
- FFDSHOW Audio doesn't appear to be installed
- WIN7 preferred AVC CODEC: Not Set correctly
- WIN7 preferred VC-1 CODEC: Not Set correctly
- WIN7 preferred MPEG2 CODEC: Not Set correctly
- FFDSHOW VC-1 set incorrectly: [0]
- FFDSHOW MPEG2 set incorrectly: [0]
- FFDSHOW AVC set incorrectly: [0]
- AnyDVD settings check: Ok.
- BD-RB vUNKNOWN, not current

baitfish18 · 04-07-2012

Thanks in advances for your help

*_chef_* · 04-07-2012

Quote:

Originally Posted by baitfish18

Thanks in advances for your help

If you wanna chat then you are obviously wrong here, otherwise why not start by reading the tools guide???

baitfish18 · 04-07-2012

Quote:

Originally Posted by _chef_

If you wanna chat then you are obviously wrong here, otherwise why not start by reading the tools guide???

Thanks for your help, by the way you might start using the power search for your dvdr authoring and HD DVD it will help you too...

*cholla* · 04-07-2012

I should just let Kerry56 respond but this should get you started.
It's obvious you haven't downloaded & installed the necessary auxiliary software .
The Inspect.exe you posted tells me this.
Do that & your MSCOMCTL.OCX problem should be solved as the correct one comes with BD Rebuilder.
Read these again paying extra attention to this after you get the other software installed :
http://club.myce.com/f142/bd-rebuild...7/#post2529547

Read & do these first:
All information in post #1
http://forum.doom9.org/showthread.php?t=143716

http://club.myce.com/f142/bd-rebuilder-guide-313227/

baitfish18 · 05-07-2012

Quote:

Originally Posted by cholla

I should just let Kerry56 respond but this should get you started.
It's obvious you haven't downloaded & installed the necessary auxiliary software .
The Inspect.exe you posted tells me this.
Do that & your MSCOMCTL.OCX problem should be solved as the correct one comes with BD Rebuilder.
Read these again paying extra attention to this after you get the other software installed :
http://club.myce.com/f142/bd-rebuild...7/#post2529547

Read & do these first:
All information in post #1
http://forum.doom9.org/showthread.php?t=143716

http://club.myce.com/f142/bd-rebuilder-guide-313227/

Hi Cholla, thanks for your reply as i am nerd on IT thing so i really appreciate what you have suggested. I have done that but the BDRB said cant run this version of BD rebuilder requires AVISNTH v2.5.7.0 or above and you are running vUNKNOWN. I dont know what this mean when i try to do what Kelly taught. Seem like my pc is not suppporting it. As for the link you have given me i will try it out now. Thanks Cholla.

*_chef_* · 05-07-2012

Quote:

Originally Posted by baitfish18

Thanks for your help, by the way you might start using the power search for your dvdr authoring and HD DVD it will help you too...

You shut it, m0r0nik0.

baitfish18 · 05-07-2012

Quote:

Originally Posted by _chef_

You shut it, m0r0nik0.

Why you call me moron, i,m just trying to help you what you are searching for as you might over look it from where you are.

Genius

**Kerry56** · 05-07-2012

@_chef_ Rudeness is not tolerated in the forums. You know better than to respond in this fashion. This is yet another warning to you.

@baitfish18
You obviously don't have the correct versions of the auxiliary programs installed. Follow cholla's advice and read through the information in the links he provided. If you are using Windows XP, Vista or Win 7, Avisynth will run on your computer.

baitfish18 · 05-07-2012

Quote:

Originally Posted by Kerry56

@_chef_ Rudeness is not tolerated in the forums. You know better than to respond in this fashion. This is yet another warning to you.

@baitfish18
You obviously don't have the correct versions of the auxiliary programs installed. Follow cholla's advice and read through the information in the links he provided. If you are using Windows XP, Vista or Win 7, Avisynth will run on your computer.

Hi Kelly,

I am sorry if i make a mess up with your forumer. Yes Cholla give me good advice and link which i read up. As my english is not so good and lack the knowledge of IT it make me hard to understand some parts. But i did try whatever i know from the reading and now it is different error came out which i think i am a step further. This time it said my BDRB requires AVISYNTH v2.7.0 ot above but my running is vUNKNOWN. Can you tell me what is vUNKNOWN and how shall i make it known to the BDRB. Thank you Kelly!

*cholla* · 05-07-2012

@ baitfish18 , You will need to install several auxiliary softwares .
The Inspect.exe shows you need all of them .
I don't know why but it even shows this "BD-RB vUNKNOWN, not current ".
So the first thing you need to do is download the latest version of BD-RB .
I'm running Vista so my scan doesn't have any WIN7 errors.
This is my scan & I know it shows one error . This is intentional on my part.
- Windows Version: 6.0 [6002]
- AVISYNTH Version: [2.5.8.0], Ok
- HAALI Splitter: [1.11.288.0], not recommended version
- FFDSHOW: [3882], Ok
- FFDSHOW VC-1 set to "wmv9", Ok
- FFDSHOW MPEG2 set to "libavcodec": Ok
- FFDSHOW AVC set to "libavcodec": Ok
- BD Rebuilder v0.40.0.8, Ok
- X264: Ok
- AFTEN: Ok
- FAAC: Ok
- MP4BOX: Ok
- WAVI: Ok
- TSMUXER: Ok
Download this :
http://www.jdobbs.net/freeware/Avisynth_258.exe
"Save as" the Avisynth_258.exe to your "Downloads" folder .
Right click on the Avisynth_258.exe & Select "Run as administrator" .
It may have some choices but unless you know that you want to make changes let it install without making changes.
Reboot your computer.
Now run the Inspect.exe again .
The AVISYNTH Version should now be correct.
You need to repeat this with each program that Inspect.exe says you don't have.

**Kerry56** · 05-07-2012

Click on this link to get the correct version of AviSynyth: http://www.jdobbs.net/freeware/Avisynth_258.exe

FFDShow: http://www.jdobbs.net/freeware/ffdsh...0613_clsid.exe

Haali Matroska Splitter: http://www.jdobbs.net/freeware/MatroskaSplitter.exe

Download and install all three of these programs.

Then make sure you have the latest BD Rebuilder version, which you can download here: http://www.jdobbs.net/freeware/BD-RBV04010.zip

Once you have everything installed, look in your list of programs and click on ffdshow-->Video Decoder Configuration and set things up as I described in my guide. Really, I can't explain the setup in this thread any better than what I did in the guide, so follow it on setting things up.

baitfish18 · 06-07-2012

Hi Kerry and Cholla, A BIG THANK YOU for you guys for helping a nerd like me to setup the rebuilder for me. My rebuilder is working now and i will play around with it to get to know to use it. This website really must thanks you guys for helping people. I will try to search around how to use it and thank you guys again.

04-07-2012	#5
cholla MyCE Resident Join Date: Jul 2007 Location: Amarillo ,Texas Posts: 5,363	I should just let Kerry56 respond but this should get you started. It's obvious you haven't downloaded & installed the necessary auxiliary software . The Inspect.exe you posted tells me this. Do that & your MSCOMCTL.OCX problem should be solved as the correct one comes with BD Rebuilder. Read these again paying extra attention to this after you get the other software installed : http://club.myce.com/f142/bd-rebuild...7/#post2529547 Read & do these first: All information in post #1 http://forum.doom9.org/showthread.php?t=143716 http://club.myce.com/f142/bd-rebuilder-guide-313227/ __________________ cholla pronounced ˈchȯi-yə click on cholla to hear

05-07-2012	#9
Kerry56 Administrator Join Date: Sep 2003 Location: West Texas Posts: 14,416	@_chef_ Rudeness is not tolerated in the forums. You know better than to respond in this fashion. This is yet another warning to you. @baitfish18 You obviously don't have the correct versions of the auxiliary programs installed. Follow cholla's advice and read through the information in the links he provided. If you are using Windows XP, Vista or Win 7, Avisynth will run on your computer. __________________ Basic Guide for BD Rebuilder BD Rebuilder Guide for MP4 or MKV conversion AVStoDVD Guide

05-07-2012	#11
cholla MyCE Resident Join Date: Jul 2007 Location: Amarillo ,Texas Posts: 5,363	@ baitfish18 , You will need to install several auxiliary softwares . The Inspect.exe shows you need all of them . I don't know why but it even shows this "BD-RB vUNKNOWN, not current ". So the first thing you need to do is download the latest version of BD-RB . I'm running Vista so my scan doesn't have any WIN7 errors. This is my scan & I know it shows one error . This is intentional on my part. - Windows Version: 6.0 [6002] - AVISYNTH Version: [2.5.8.0], Ok - HAALI Splitter: [1.11.288.0], not recommended version - FFDSHOW: [3882], Ok - FFDSHOW VC-1 set to "wmv9", Ok - FFDSHOW MPEG2 set to "libavcodec": Ok - FFDSHOW AVC set to "libavcodec": Ok - BD Rebuilder v0.40.0.8, Ok - X264: Ok - AFTEN: Ok - FAAC: Ok - MP4BOX: Ok - WAVI: Ok - TSMUXER: Ok Download this : http://www.jdobbs.net/freeware/Avisynth_258.exe "Save as" the Avisynth_258.exe to your "Downloads" folder . Right click on the Avisynth_258.exe & Select "Run as administrator" . It may have some choices but unless you know that you want to make changes let it install without making changes. Reboot your computer. Now run the Inspect.exe again . The AVISYNTH Version should now be correct. You need to repeat this with each program that Inspect.exe says you don't have. __________________ cholla pronounced ˈchȯi-yə click on cholla to hear

05-07-2012	#12
Kerry56 Administrator Join Date: Sep 2003 Location: West Texas Posts: 14,416	Click on this link to get the correct version of AviSynyth: http://www.jdobbs.net/freeware/Avisynth_258.exe FFDShow: http://www.jdobbs.net/freeware/ffdsh...0613_clsid.exe Haali Matroska Splitter: http://www.jdobbs.net/freeware/MatroskaSplitter.exe Download and install all three of these programs. Then make sure you have the latest BD Rebuilder version, which you can download here: http://www.jdobbs.net/freeware/BD-RBV04010.zip Once you have everything installed, look in your list of programs and click on ffdshow-->Video Decoder Configuration and set things up as I described in my guide. Really, I can't explain the setup in this thread any better than what I did in the guide, so follow it on setting things up. __________________ Basic Guide for BD Rebuilder BD Rebuilder Guide for MP4 or MKV conversion AVStoDVD Guide

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Please Help: registry.message .file missing COMCTI32.OCX	jexpert	CD, DVD and Blu-ray Writers	1	26-04-2009 19:00
File-sharing software WinMX updated, chat component upgraded	G@M3FR3@K	Latest News Headlines	3	27-02-2006 16:23
Invalid File Size	heatman	Newbie Forum	3	23-06-2005 16:28
FILE .OCX Dove ?	balilla	Italian: Chat	2	16-07-2001 07:44
Maledetto file ocx	balilla	Italian: Chat	3	16-04-2001 22:52

04-07-2012	#1
baitfish18 New Member Join Date: Jul 2012 Posts: 15	Component MSCOMCTL.OCX or one of its denpendencies is not registered : A FILE IS MISSING OR INVALID hi guys, i need help on the above problem mention, also i try to inspect which kelly taught all this came out(look at below). What went wrong when i download the rebuilder from their official site? Windows Version: 6.1 [7601] - AVISYNTH Version: [UNKNOWN], not recommended version - HAALI Splitter: Not installed - FFDSHOW doesn't appear to be installed - FFDSHOW Audio doesn't appear to be installed - WIN7 preferred AVC CODEC: Not Set correctly - WIN7 preferred VC-1 CODEC: Not Set correctly - WIN7 preferred MPEG2 CODEC: Not Set correctly - FFDSHOW VC-1 set incorrectly: [0] - FFDSHOW MPEG2 set incorrectly: [0] - FFDSHOW AVC set incorrectly: [0] - AnyDVD settings check: Ok. - BD-RB vUNKNOWN, not current

Today
Mr. Adbot Register to remove me Join Date: Today Location: Myce HQ Posts: Zillions

Today
Adbot Always the best offers Join Date: Today Location: Myce HQ Posts: Zillions

06-07-2012	#13
baitfish18 New Member Join Date: Jul 2012 Posts: 15	Hi Kerry and Cholla, A BIG THANK YOU for you guys for helping a nerd like me to setup the rebuilder for me. My rebuilder is working now and i will play around with it to get to know to use it. This website really must thanks you guys for helping people. I will try to search around how to use it and thank you guys again.