Old 07-10-2006   #1
New on Forum
 
Join Date: Oct 2006
Posts: 2
error reading data, burn processed failed

hi i tried copying a dvd but after a certain percentage of burning the dvd failed with error reading data, burn procesed failed.. i tried the following

1) burn a different dvd.. failed.
2)use a different blank dvd.. failed
3) burn to image... failed
4)disable quick copy (worked for last week then when i tried again this week it did not work as well )
5)tried burning vcd..worked.. but still failed in dvd
6) update firmware of my dvd and dvd writer..still failed
7) reinstalled nero... same problem...
8) reduced number of startup programs.. same prob
9)replaced the dvd writer with a newer one -_-.. same prob
10)the dvd which i was trying to burn actually managed to be burnt on my other com with the exact same version of nero.. but not on this current one..
11)i checked the advanced hardware in device manager to make sure the ide's were in dma mode and not pio as well.
12) the dvd is able to be played on this pc with both drives..
13) the last thing i did..was to come to this forum to seek for help from u guys

*btw on the fly does burn but usually does not go above 10% before it starts getting error reading data and fails wasting my disks.. so far wasted more than 5 please help...

Help would be greatly appreciated thanks. .

the error log is as follows



Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 7:06:00 PM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/27/2004 12:35:32 AM
Nero Version: 6.6.0.19
Internal Version: 6, 6, 0, 19b
(Nero Express)
Recorder: <TSSTcorp CD/DVDW SH-S182D>Version: SB03 - HA 1 TA 1 - 6.6.0.19
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <TSSTcorp CD/DVDW SH-S182D>Version: SB03 - HA 1 TA 1 - 6.6.0.19
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST340016A atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6Y080P0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : SAMSUNG DVD-ROM SD-616E atapi Port 1 ID 0 DMA: On
CdRomPeripheral : TSSTcorp CD/DVDW SH-S182D atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
SAMSUNG DVD-ROM SD-616E D: CDRom0
TSSTcorp CD/DVDW SH-S182D E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523764kB)
Free physical memory: 303MB (310408kB)
Memory in use : 40 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

7.10.2006
===== Disc-Copy over image - 1st step : Copy to image ...

10:28:29 PM #1 Text 0 File Reader.cpp, Line 127
Reader running

10:28:29 PM #2 Text 0 File Writer.cpp, Line 122
Writer Image Recorder running

10:28:29 PM #3 Text 0 File DVDCopy.cpp, Line 293
DVD Track-Information from source disc:
Media Type: DVD-R
S01 T01 Con 0x14 Start 0 Len 2073584 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)

10:28:29 PM #4 Text 0 File DVDCopy.cpp, Line 406
Max -1 tracks of 1 allowed to copy
1: 0 - 2073584 = 2073584, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

10:28:29 PM #5 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

10:28:30 PM #6 Text 0 File DlgWaitCD.cpp, Line 272
Last possible write address on media: 4718591 (1048:34.41, 9215MB)
Last address to be written: 2073583 (460:47.58, 4049MB)

10:28:30 PM #7 Text 0 File DlgWaitCD.cpp, Line 284
Write in overburning mode: NO (enabled: CD)

10:28:30 PM #8 Text 0 File DlgWaitCD.cpp, Line 450
>>> Protocol of DlgWaitCD activities: <<<
=========================================

10:28:30 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 2073584 (2073584) = #2073584/460:47.59
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2073584 blocks [Image Recorder]
--------------------------------------------------------------

10:28:30 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [Image Recorder] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4246700032, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2073584 | lead-out | 1 | 0x41 | 0x00

10:28:30 PM #11 Phase 120 File dlgbrnst.cpp, Line 1832
Creating the image for burning

10:28:30 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

10:29:14 PM #13 SCSI -400 File Cdrdrv.cpp, Line 1437
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x04171000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x3E
Sense Qual: 0x02
CDB Data: 0x28 0x00 0x00 0x02 0x10 0x80 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x3E 0x02

10:29:14 PM #14 TRANSFER -25 File Reader.cpp, Line 382
Error reading data

10:29:14 PM #15 Text 0 File Reader.cpp, Line 385
Exception value: -400

10:29:14 PM #16 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

10:29:14 PM #17 Phase 22 File dlgbrnst.cpp, Line 1832
Reading disc failed



===== Disc-Copy over image - 2nd step : Burn the image ...

10:28:29 PM #1 Text 0 File Reader.cpp, Line 127
Reader running

10:28:29 PM #2 Text 0 File Writer.cpp, Line 122
Writer Image Recorder running

10:28:29 PM #3 Text 0 File DVDCopy.cpp, Line 293
DVD Track-Information from source disc:
Media Type: DVD-R
S01 T01 Con 0x14 Start 0 Len 2073584 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)

10:28:29 PM #4 Text 0 File DVDCopy.cpp, Line 406
Max -1 tracks of 1 allowed to copy
1: 0 - 2073584 = 2073584, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

10:28:29 PM #5 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

10:28:30 PM #6 Text 0 File DlgWaitCD.cpp, Line 272
Last possible write address on media: 4718591 (1048:34.41, 9215MB)
Last address to be written: 2073583 (460:47.58, 4049MB)

10:28:30 PM #7 Text 0 File DlgWaitCD.cpp, Line 284
Write in overburning mode: NO (enabled: CD)

10:28:30 PM #8 Text 0 File DlgWaitCD.cpp, Line 450
>>> Protocol of DlgWaitCD activities: <<<
=========================================

10:28:30 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 2073584 (2073584) = #2073584/460:47.59
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2073584 blocks [Image Recorder]
--------------------------------------------------------------

10:28:30 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [Image Recorder] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4246700032, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2073584 | lead-out | 1 | 0x41 | 0x00

10:28:30 PM #11 Phase 120 File dlgbrnst.cpp, Line 1832
Creating the image for burning

10:28:30 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

10:29:14 PM #13 SCSI -400 File Cdrdrv.cpp, Line 1437
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x04171000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x3E
Sense Qual: 0x02
CDB Data: 0x28 0x00 0x00 0x02 0x10 0x80 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x3E 0x02

10:29:14 PM #14 TRANSFER -25 File Reader.cpp, Line 382
Error reading data

10:29:14 PM #15 Text 0 File Reader.cpp, Line 385
Exception value: -400

10:29:14 PM #16 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

10:29:14 PM #17 Phase 22 File dlgbrnst.cpp, Line 1832
Reading disc failed


Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 7:06:00 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 11/18/2005 12:19:28 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
laxon is offline   Reply With Quote
Old 08-10-2006   #2
MyCE Resident
 
TimC's Avatar
 
Join Date: Mar 2004
Location: UK
Posts: 7,496
Re: error reading data, burn processed failed

You could try ripping to HDD with DVD Decrypter as it has error retries built in whereas I don't think Nero has.
TimC is offline   Reply With Quote
Old 10-10-2006   #3
CD Freaks Senior Member
 
Join Date: Jun 2006
Posts: 450
Re: error reading data, burn processed failed

Are you using Dual Layer media, because it appears you have Nero set for that. If you aren't, try setting the DVD to -5 instead of -9.
__________________
Nero 7 v7.7.5.1
NEC ND-3550A
P4 2.4 GHz 1G RAM
Saltgrass is offline   Reply With Quote
Old 11-10-2006   #4
New on Forum
 
Join Date: Oct 2006
Posts: 2
Re: error reading data, burn processed failed

i am using Nero Express 6
hmm i am trying to get it copy disc on the fly instead of copying to harddisk first..
how to i go about setting the dvd to -5?
thanks
laxon is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Burn Processed Failed @ 1% always whodafunk CD, DVD and Blu-ray Writers 8 26-06-2007 05:42
Burn Errors (Data Verification Failed) SlaSH66 NEC / Optiarc Writer 5 27-05-2005 16:21
Where does Recode stores data about processed DVD? Alainc Movie copy software 2 21-02-2004 18:34
burn a data DVD failed haiyxin Nero & InCD 2 03-01-2004 18:35
Data DVD Burn Failed with BTC DRW1004IM Skavenger CD, DVD and Blu-ray Writers 12 13-11-2003 18:03


All times are GMT +2. The time now is 23:39.
Top