Old 03-08-2006   #1
New on Forum
 
Join Date: Jul 2006
Posts: 8
"Could not perform end of Disc-at-once" error message with Nero. :(

Hello. I have been burning some DVD's, with DVDShrink/Nero (v. 6.31.1.1), the first few worked out ok. But when I tried to burn the second Futurama DVD (the first one worked fine), it said "Burn process failed".

I'm using Imation DVD's, but I don't think they are the problem because after I got the problem above, I tried burning a different DVD and that worked, then when I went and tried to burn the Futurama DVD again, it didn't work.

It was burning fine until I got these errors:

"PMA update failure" and

"Could not perform end of Disc-at-once"

I'm a bit hesitant to update Nero because of the problems I've heard when people updated and then it wouldn't work with DVDShrink afterwards (which is what I use).

Here's the log:


=====================================
Beginning of Nero Log.
=====================================

Windows 2000 5.0
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 7:18:06 PM
Nero version: 6.3.1.11 (Nero Express)
Recorder: <LITE-ON DVDRW SOHW-1213S>Version: TS0J - HA 1 TA 0 - 6.3.1.11
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <LG CD-ROM CRD-8400C>Version: 1.02 - HA 1 TA 1 - 6.3.1.11
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST320014A atapi Port 0 ID 0 DMA: On
DiskPeripheral : QUANTUM FIREBALL CX13.0A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : LITE-ON DVDRW SOHW-1213S atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LG CD-ROM CRD-8400C atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
LITE-ON DVDRW SOHW-1213S D: CDRom0
LG CD-ROM CRD-8400C E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 255MB (261616kB)
Free physical memory: 71MB (72808kB)
Memory in use : 72 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

3.8.2006
UDF/ISO compilation
2:10:08 PM #1 Phase 112 File dlgbrnst.cpp, Line 1836
DVD-Video files reallocation started

2:10:08 PM #2 Phase 114 File dlgbrnst.cpp, Line 1836
DVD-Video files reallocation completed (no file modified)

2:10:08 PM #3 Text 0 File Isodoc.cpp, Line 6065
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

2:10:08 PM #4 Phase 111 File dlgbrnst.cpp, Line 1836
DVD-Video files sorted

2:10:09 PM #5 Text 0 File Reader.cpp, Line 118
Reader running

2:10:09 PM #6 Text 0 File Writer.cpp, Line 124
Writer LITE-ON DVDRW SOHW-1213S running

2:10:09 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

2:10:09 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

2:10:09 PM #9 Text 0 File Burncd.cpp, Line 3196
Turn on Disc-at-once, using DVD media

2:10:09 PM #10 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 2297887 (510:38.37, 4488MB)
Last address to be written: 2286127 (508:01.52, 4465MB)

2:10:09 PM #11 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE

2:10:09 PM #12 Text 0 File DlgWaitCD.cpp, Line 2107
Recorder: LITE-ON DVDRW SOHW-1213S, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AE1
Disc Application Code: 64, Disc Physical Code: 193

2:10:09 PM #13 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================

2:10:09 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [LITE-ON DVDRW SOHW-1213S]
--------------------------------------------------------------

2:10:09 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [LITE-ON DVDRW SOHW-1213S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2286128 | lead-out | 1 | 0x00 | 0x41

2:10:09 PM #16 Phase 24 File dlgbrnst.cpp, Line 1836
Caching of files started

2:10:09 PM #17 Text 0 File Burncd.cpp, Line 4206
Cache writing successful.

2:10:09 PM #18 Phase 25 File dlgbrnst.cpp, Line 1836
Caching of files completed

2:10:09 PM #19 Phase 36 File dlgbrnst.cpp, Line 1836
Burn process started at 8x (11,040 KB/s)

2:10:09 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

2:10:09 PM #21 Text 0 File dlgbrnst.cpp, Line 1694
Set remaining time: 7:07,639 (427639ms) -> OK

2:10:09 PM #22 Text 0 File DVDR.cpp, Line 1664
Recording mode: Sequential Recording Mode

2:10:09 PM #23 Text 0 File Mmc.cpp, Line 20125
Set BUFE: supported -> ON , SMART-BURN : ON

2:10:09 PM #24 Text 0 File DVDR.cpp, Line 1805
Start write address at LBA 0
DVD high compatibility mode: No

2:10:09 PM #25 Text 0 File Cdrdrv.cpp, Line 8063
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 30 00 10 20 00 00 00 - 00 00 00 00 00 00 00 00 .0..............
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

2:10:34 PM #26 Text 0 File Cdrdrv.cpp, Line 1293
14:10:34.365 - LITE-ON DVDRW SOHW-1213S\H1 T0 : Queue again later

2:20:19 PM #27 Text 0 File WriterStatus.cpp, Line 115
<LITE-ON DVDRW SOHW-1213S> start writing Lead-Out at LBA 2286128 (22E230h), lenght 0 blocks

2:20:20 PM #28 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

2:20:20 PM #29 Text 0 File DVDR.cpp, Line 2015
EndDAO: Last written address was 2286127

2:20:54 PM #30 SCSI -1194 File Cdrdrv.cpp, Line 1187
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x04
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x73 0x04

2:20:54 PM #31 Text 0 File dlgbrnst.cpp, Line 1694
Set remaining time: 0:00,000 (0ms) -> OK

2:20:54 PM #32 CDR -1194 File ThreadedTransferInterface.cpp, Line 1701
PMA update failure

2:20:54 PM #33 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1701
Could not perform end of Disc-at-once

2:20:54 PM #34 Text 0 File DVDR.cpp, Line 2015
EndDAO: Last written address was -1

2:20:54 PM #35 Text 0 File dlgbrnst.cpp, Line 1694
Set remaining time: 0:00,000 (0ms) -> OK

2:20:54 PM #36 Text 0 File dlgbrnst.cpp, Line 1694
Set remaining time: 0:00,000 (0ms) -> OK

2:20:54 PM #37 Phase 38 File dlgbrnst.cpp, Line 1836
Burn process failed at 8x (11,040 KB/s)


Existing drivers:
File 'Drivers\CDR4_2K.SYS': Ver=5.3.2.31, size=58000 bytes, created 16/12/2004 7:30:17 AM
File 'Drivers\CDRALW2K.SYS': Ver=5.3.2.31, size=23420 bytes, created 16/12/2004 7:30:17 AM
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 12/06/2003 5:30:00 PM
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 21/12/2004 4:07:14 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.00.2195.6699, size=86672 bytes, created 19/06/2003 11:05:04 AM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

=====================================
End of Nero Log.
=====================================

Thanks, and I would really appreciate some help.

Last edited by rachelcakes1985; 03-08-2006 at 08:18. Reason: moe info in title
rachelcakes1985 is offline   Reply With Quote
Old 03-08-2006   #2
New on Forum
 
Join Date: Jul 2006
Posts: 8
Re: "Could not perform end of Disc-at-once" error message with Nero. :(

EDIT: And not I'm getting an "illegal disc" error when I try to burn.
rachelcakes1985 is offline   Reply With Quote
Old 03-08-2006   #3
CE Freak
 
Join Date: Mar 2006
Location: Almost there
Posts: 4,443
Re: "Could not perform end of Disc-at-once" error message with Nero. :(

It's probably a media issue. Unless you want to become a CDFreak and learn about media codes etc., only buy Verbatim blank DVD's (and even then not from their Pearl White series).

You could also set Shrink to compress the material 1 or 2% more, so you won't be burning as far to the edge of the disc (which is where the problem occured this time and where the weak spot of most discs is).
Cressida is offline   Reply With Quote
Old 04-08-2006   #4
New on Forum
 
Join Date: Jul 2006
Posts: 8
Re: "Could not perform end of Disc-at-once" error message with Nero. :(

Thanks for your help.

I'll buy myself some Verbatims, and see how I go. If they work well, I'll use them from now on. I'm a bit annyed though because these Imations can be a bit tempermental with my drive and burning software- sometimes it works, sometimes it doesn't.

I know a little bit about media codes, but I'm not sure how to find out which media codes go best with my drive. Is there a site for this? Mine's a Lite-on DVDRW sohw-1213s.
rachelcakes1985 is offline   Reply With Quote
Old 04-08-2006   #5
CE Freak
 
Join Date: Mar 2006
Location: Almost there
Posts: 4,443
Re: "Could not perform end of Disc-at-once" error message with Nero. :(

Have a look here: http://www.videohelp.com/dvdwriters....ist=2#comments
Remember these are user comments and can be subjective.

If you know about media codes, you should also know about quality scanning of your burned discs with CD-DVD Speed or KProbe. Even a successful burn doesn't guarantee a good disc. Until you find a reliable combination of burner & media, use this scanning option to check your work and avoid unpleasant surprises. Verbatim DVD+R 16X (MCC 004) is probably the best and most compatible media available right now.

And as mentioned before, you can enhance your drive's dvd-burning capabilities by crossflashing it to a 1653S model with codeguys firmware.
Cressida is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Nero 6 " unable to recover TOC" & " "Could not perform end of Disc-at-once" dusty1949 Nero & InCD 0 01-09-2007 14:26
HELP... could not perform end of disc at once ERROR MESSAGE Nero 6.6.0.16 Muddy222 Nero & InCD 6 17-06-2007 00:56
Nero 7 "Could not perform end of Disc-at-once" speckone Nero & InCD 1 19-11-2005 14:01
Nero 6 "Could not perform end of disc at once" error UpChuck1Jr Nero & InCD 3 10-11-2004 18:03
811S HS0R TTG01 patched error "Could not perform end of Disc-at-once" serge_vt LiteOn / PLDS / Sony Writer 4 05-11-2004 16:50


All times are GMT +2. The time now is 06:41.
Top