problems with 451S- Help

gene74 · 25-12-2003

I just installed this drive this morning. Set is as Master on Seondary. This is my setup.

Windows XP SP1 Pro
Prim-Master- WD 120 gb
Secon-Master- LDW-451S

Additional IDE card
Prim master-Lite on CD burner
Secon-Master Lite ON DVD rom

tried using different cables, known good cables, it hangs up on Windows XP screen with bar moving across and stops there.
Took it out of Seconday and move to IDE card as prim master then move to secon master. Same thing. Tried good cables as always. It does not want to boot. One thing i noticed is if i do it in safe mode. It hangs on mup.sys.

Any ideas?

Board: Abit KX7-333 latest bios
Athlon 2400 xp
1 gig pc2700
audigy 2
Radeon 9700 pro

Now if i dont add the DVD writer, it will boot to xp with no issues.

aaronwt · 25-12-2003

Did you move the jumper to cable select or master? I know I had some problems with my 811S when I first hooked it up because I forgot to move the jumper from slave to cable select. I had it in the master position on the cable and had problems since the jumper was still set to slave.

gene74 · 25-12-2003

I have it on Master.

js2020 · 26-12-2003

try moving the jumper setting to cable select. it worked for me.

gene74 · 26-12-2003

Did that.... Also used slave. Nothing. I guess i will be returning this drive tomorrow.

25-12-2003	#1
gene74 New on Forum Join Date: Nov 2003 Posts: 11	problems with 451S- Help I just installed this drive this morning. Set is as Master on Seondary. This is my setup. Windows XP SP1 Pro Prim-Master- WD 120 gb Secon-Master- LDW-451S Additional IDE card Prim master-Lite on CD burner Secon-Master Lite ON DVD rom tried using different cables, known good cables, it hangs up on Windows XP screen with bar moving across and stops there. Took it out of Seconday and move to IDE card as prim master then move to secon master. Same thing. Tried good cables as always. It does not want to boot. One thing i noticed is if i do it in safe mode. It hangs on mup.sys. Any ideas? Board: Abit KX7-333 latest bios Athlon 2400 xp 1 gig pc2700 audigy 2 Radeon 9700 pro Now if i dont add the DVD writer, it will boot to xp with no issues. Last edited by gene74; 25-12-2003 at 15:30.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nasty problems with my LDW-451S, help!	Silonwe	LiteOn / PLDS / Sony Writer	4	10-06-2005 07:14
Problems with 451S GSB7	MartinV	LiteOn / PLDS / Sony Writer	15	28-07-2004 12:01
Lite-on 451S problems	AcadianMan	LiteOn / PLDS / Sony Writer	8	14-06-2004 21:14
Please Help 451s burning problems	Empire	LiteOn / PLDS / Sony Writer	0	01-02-2004 23:25
Problems with 451S and XP?	i_falk	LiteOn / PLDS / Sony Writer	3	13-01-2004 16:59

25-12-2003	#2
aaronwt CD Freaks Member Join Date: Sep 2003 Location: Northern VA Posts: 198	Did you move the jumper to cable select or master? I know I had some problems with my 811S when I first hooked it up because I forgot to move the jumper from slave to cable select. I had it in the master position on the cable and had problems since the jumper was still set to slave.

Today
Adbot Always the best offers Join Date: Today Location: Myce HQ Posts: Zillions

26-12-2003	#4
js2020 New on Forum Join Date: May 2003 Posts: 19	try moving the jumper setting to cable select. it worked for me.