LiteOn DH20A3 Test Firmware - Results & Discussion

LiteOn / PLDS / Sony Writer Discuss, LiteOn DH20A3 Test Firmware - Results & Discussion at CD and DVD Writers forum; Imation 16x +R ( SONYD21 MII ) burned at 18x. OS on. OHT,FHT,SB off. XV5J-HT689 Attached Images ATAPI___DVD_A__DH20A3P_XV5J_10-December-2007_18_36.png (39.9 KB, 149 views) ATAPI___DVD_A__DH20A3P_XV5J_10-December-2007_18_58.png (37.9 KB, 149 views) ATAPI___DVD_A__DH20A3P_XV5J_10-December-2007_19_03.png (37.9 KB, 149 views)

Old Posted: 10-12-2007
zhadoom (MyCE Resident)
Posts: 1,271
  • Find More Posts by zhadoom
Imation 16x +R ( SONYD21 MII ) burned at 18x. OS on. OHT,FHT,SB off.

XV5J-HT689
__________________
My drives:
BD-Writer LG BH08LS20 2.00 BD-Writer LG GGW-H20L YL05
Samsung SH-S203B(SB04 FR FB EOPC) - Samsung SH-W162C TS11 - Samsung TS-H552U US09
BENQ 1620 B7W9 - LG H42N@H44N RB01 - Region Reset
LG H10A@H10N@H12N UJ13 - LG H22N 1.02 - LG H55N 1.06 - LG GH22NP20 2.00 - LG GH22NS50
Liteon iHAS122 A DL0N Sony AD-7190A@DH20A3P XV68 - EOHT - FB - FR - EOS / XV6D - Sony G120A@165P6S MS0R
Pioneer DVR-K17 - Pioneer DVR-108 1.18 by nil:
default_avatar
Today (MyCE Staff)
Posts: 15,596
Old Posted: 11-12-2007
zhadoom (MyCE Resident)
Posts: 1,271
  • Find More Posts by zhadoom
BENQ 16x +R ( DAXONAZ3 ) burned at 16x.
__________________
My drives:
BD-Writer LG BH08LS20 2.00 BD-Writer LG GGW-H20L YL05
Samsung SH-S203B(SB04 FR FB EOPC) - Samsung SH-W162C TS11 - Samsung TS-H552U US09
BENQ 1620 B7W9 - LG H42N@H44N RB01 - Region Reset
LG H10A@H10N@H12N UJ13 - LG H22N 1.02 - LG H55N 1.06 - LG GH22NP20 2.00 - LG GH22NS50
Liteon iHAS122 A DL0N Sony AD-7190A@DH20A3P XV68 - EOHT - FB - FR - EOS / XV6D - Sony G120A@165P6S MS0R
Pioneer DVR-K17 - Pioneer DVR-108 1.18 by nil:
Old Posted: 11-12-2007
C0deKing (Senior Administrator)
Posts: 11,455
  • Find More Posts by C0deKing
Here's 2 burns of the same Imation MCC004 (Prodisc). The first one is at 20x with OS only enabled and burned in 4:48.

The second is with OS and OHT enabled. The second burn would not burn at 20x and the leadout was very long, meaning a burn time of 5:24 (normally 5:06).

Hmm, it would seem that OHT off is the better choice.
Attached Images
File Type: png D218_XV5N_MCC_004_20x_NS_BS_1.png (39.7 KB, 144 views)
File Type: png D218_XV5N_MCC_004_20x_NS_ES_1.png (36.9 KB, 144 views)
File Type: png D219_XV5N_MCC_004_20x_OHT_NS_BS_1.png (41.5 KB, 138 views)
File Type: png D219_XV5N_MCC_004_20x_OHT_NS_ES_1.png (37.8 KB, 142 views)
__________________
http://codeguys.rpc1.org/ <-- Firmware page updated!
LiteOn Tools: EEPROM Utility <-- New v6.0.0, Flash Utility <-- New v4.0.0, Settings Utility <-- New v1.2.1
Samsung Tools: Patch Utility <-- New v3.4.10
LiteOn Patches: Fast Read (FR) | Fast Burn (FB) | Enhanced OverSpeed (EOS) | Enhanced Online HyperTuning (EOHT)
BenQ Patches: Fast Burn (FB) | Enhanced SolidBurn (ESB)
Samsung Patches: Fast Read (FR) | Remove RipLock (RLR) | Fast Burn (FB) | Retain book type (BS) | Default DVD-ROM (ROMD)

The man who does things makes mistakes, but he who doesn't makes the biggest mistake of all - doing nothing. Benjamin Franklin

The Forum Rules

Click HERE to join cdfreaks.com
Old Posted: 11-12-2007
zhadoom (MyCE Resident)
Posts: 1,271
  • Find More Posts by zhadoom
Quote:
Originally Posted by C0deKing View Post
Here's 2 burns of the same Imation MCC004 (Prodisc). The first one is at 20x with OS only enabled and burned in 4:48.

The second is with OS and OHT enabled. The second burn would not burn at 20x and the leadout was very long, meaning a burn time of 5:24 (normally 5:06).

Hmm, it would seem that OHT off is the better choice.
Just curious. is the led "double blinking" during the burn process ?

My previous SONYD21 burn show no HT points in the burning graph but double blinks during the burn process just like an HT/OHT process.

I already tested MCC004 with OHT,FHT off and the results are dubious ( weird ).
- CMC made discs produces good results with OHT/FHT on
- CMC made discs produces bad results ( in the end ) with OHT/FHT off
- Prodisc made discs produces excellent results with OHT,FHT on
I will test Procisc MCC004 with OHT/FHT off an post the results.
__________________
My drives:
BD-Writer LG BH08LS20 2.00 BD-Writer LG GGW-H20L YL05
Samsung SH-S203B(SB04 FR FB EOPC) - Samsung SH-W162C TS11 - Samsung TS-H552U US09
BENQ 1620 B7W9 - LG H42N@H44N RB01 - Region Reset
LG H10A@H10N@H12N UJ13 - LG H22N 1.02 - LG H55N 1.06 - LG GH22NP20 2.00 - LG GH22NS50
Liteon iHAS122 A DL0N Sony AD-7190A@DH20A3P XV68 - EOHT - FB - FR - EOS / XV6D - Sony G120A@165P6S MS0R
Pioneer DVR-K17 - Pioneer DVR-108 1.18 by nil:
Old Posted: 11-12-2007
C0deKing (Senior Administrator)
Posts: 11,455
  • Find More Posts by C0deKing
Yes. The double blink indicates that HT is active, which happens whenever you overspeed a disc, which doesn't have a strategy for the speed selected. The dips are caused by OHT.

I notice you are still using an old version of the test firmware. I think Wind would prefer to see results with the latest version. If the latest version causes a problem with your drive, I'm sure he would like to see it even more so.
__________________
http://codeguys.rpc1.org/ <-- Firmware page updated!
LiteOn Tools: EEPROM Utility <-- New v6.0.0, Flash Utility <-- New v4.0.0, Settings Utility <-- New v1.2.1
Samsung Tools: Patch Utility <-- New v3.4.10
LiteOn Patches: Fast Read (FR) | Fast Burn (FB) | Enhanced OverSpeed (EOS) | Enhanced Online HyperTuning (EOHT)
BenQ Patches: Fast Burn (FB) | Enhanced SolidBurn (ESB)
Samsung Patches: Fast Read (FR) | Remove RipLock (RLR) | Fast Burn (FB) | Retain book type (BS) | Default DVD-ROM (ROMD)

The man who does things makes mistakes, but he who doesn't makes the biggest mistake of all - doing nothing. Benjamin Franklin

The Forum Rules

Click HERE to join cdfreaks.com
Old Posted: 11-12-2007
C0deKing (Senior Administrator)
Posts: 11,455
  • Find More Posts by C0deKing
Verbatim MCC004 (Prodisc), burned at 20x, OS On (4:38)

This burn was just so I could have the fastest burn time so far, hehe.
Attached Images
File Type: png D220_XV5N_MCC_004_20x_NS_BS_1.png (39.5 KB, 138 views)
File Type: png D220_XV5N_MCC_004_20x_NS_ES_1.png (37.2 KB, 140 views)
__________________
http://codeguys.rpc1.org/ <-- Firmware page updated!
LiteOn Tools: EEPROM Utility <-- New v6.0.0, Flash Utility <-- New v4.0.0, Settings Utility <-- New v1.2.1
Samsung Tools: Patch Utility <-- New v3.4.10
LiteOn Patches: Fast Read (FR) | Fast Burn (FB) | Enhanced OverSpeed (EOS) | Enhanced Online HyperTuning (EOHT)
BenQ Patches: Fast Burn (FB) | Enhanced SolidBurn (ESB)
Samsung Patches: Fast Read (FR) | Remove RipLock (RLR) | Fast Burn (FB) | Retain book type (BS) | Default DVD-ROM (ROMD)

The man who does things makes mistakes, but he who doesn't makes the biggest mistake of all - doing nothing. Benjamin Franklin

The Forum Rules

Click HERE to join cdfreaks.com
Old Posted: 11-12-2007
zhadoom (MyCE Resident)
Posts: 1,271
  • Find More Posts by zhadoom
Quote:
Originally Posted by C0deKing View Post
Verbatim MCC004 (Prodisc), burned at 20x, OS On (4:38)

This burn was just so I could have the fastest burn time so far, hehe.
is the 20x RPM at 19.9x ????
__________________
My drives:
BD-Writer LG BH08LS20 2.00 BD-Writer LG GGW-H20L YL05
Samsung SH-S203B(SB04 FR FB EOPC) - Samsung SH-W162C TS11 - Samsung TS-H552U US09
BENQ 1620 B7W9 - LG H42N@H44N RB01 - Region Reset
LG H10A@H10N@H12N UJ13 - LG H22N 1.02 - LG H55N 1.06 - LG GH22NP20 2.00 - LG GH22NS50
Liteon iHAS122 A DL0N Sony AD-7190A@DH20A3P XV68 - EOHT - FB - FR - EOS / XV6D - Sony G120A@165P6S MS0R
Pioneer DVR-K17 - Pioneer DVR-108 1.18 by nil:
Old Posted: 11-12-2007
C0deKing (Senior Administrator)
Posts: 11,455
  • Find More Posts by C0deKing
Quote:
Originally Posted by zhadoom View Post
is the 20x RPM at 19.9x ????
Shhhhhhhh! I don't want anyone to know my secret...
__________________
http://codeguys.rpc1.org/ <-- Firmware page updated!
LiteOn Tools: EEPROM Utility <-- New v6.0.0, Flash Utility <-- New v4.0.0, Settings Utility <-- New v1.2.1
Samsung Tools: Patch Utility <-- New v3.4.10
LiteOn Patches: Fast Read (FR) | Fast Burn (FB) | Enhanced OverSpeed (EOS) | Enhanced Online HyperTuning (EOHT)
BenQ Patches: Fast Burn (FB) | Enhanced SolidBurn (ESB)
Samsung Patches: Fast Read (FR) | Remove RipLock (RLR) | Fast Burn (FB) | Retain book type (BS) | Default DVD-ROM (ROMD)

The man who does things makes mistakes, but he who doesn't makes the biggest mistake of all - doing nothing. Benjamin Franklin

The Forum Rules

Click HERE to join cdfreaks.com
Old Posted: 11-12-2007
zhadoom (MyCE Resident)
Posts: 1,271
  • Find More Posts by zhadoom
Quote:
Originally Posted by C0deKing View Post
Shhhhhhhh! I don't want anyone to know my secret...
LOL.
__________________
My drives:
BD-Writer LG BH08LS20 2.00 BD-Writer LG GGW-H20L YL05
Samsung SH-S203B(SB04 FR FB EOPC) - Samsung SH-W162C TS11 - Samsung TS-H552U US09
BENQ 1620 B7W9 - LG H42N@H44N RB01 - Region Reset
LG H10A@H10N@H12N UJ13 - LG H22N 1.02 - LG H55N 1.06 - LG GH22NP20 2.00 - LG GH22NS50
Liteon iHAS122 A DL0N Sony AD-7190A@DH20A3P XV68 - EOHT - FB - FR - EOS / XV6D - Sony G120A@165P6S MS0R
Pioneer DVR-K17 - Pioneer DVR-108 1.18 by nil:
Old Posted: 11-12-2007
default_avatar
Wind (CD Freaks Senior Member)
Posts: 492
  • Find More Posts by Wind
Quote:
Originally Posted by C0deKing View Post
Hmm, it would seem that OHT off is the better choice.
Do you think it is better to let user switch the function of OHT when overspeed to 18/20x?
Old Posted: 11-12-2007
C0deKing (Senior Administrator)
Posts: 11,455
  • Find More Posts by C0deKing
Quote:
Originally Posted by Wind View Post
Do you think it is better to let user switch the function of OHT when overspeed to 18/20x?
I haven't tried many discs, because I thought the option to do this was already gone, but from what I'm seeing, with this version, it looks like the option should be left for the user.

I think the improvement in jitter has made a big difference to (OHT off) 18x/20x burning.
__________________
http://codeguys.rpc1.org/ <-- Firmware page updated!
LiteOn Tools: EEPROM Utility <-- New v6.0.0, Flash Utility <-- New v4.0.0, Settings Utility <-- New v1.2.1
Samsung Tools: Patch Utility <-- New v3.4.10
LiteOn Patches: Fast Read (FR) | Fast Burn (FB) | Enhanced OverSpeed (EOS) | Enhanced Online HyperTuning (EOHT)
BenQ Patches: Fast Burn (FB) | Enhanced SolidBurn (ESB)
Samsung Patches: Fast Read (FR) | Remove RipLock (RLR) | Fast Burn (FB) | Retain book type (BS) | Default DVD-ROM (ROMD)

The man who does things makes mistakes, but he who doesn't makes the biggest mistake of all - doing nothing. Benjamin Franklin

The Forum Rules

Click HERE to join cdfreaks.com
Old Posted: 11-12-2007
zhadoom (MyCE Resident)
Posts: 1,271
  • Find More Posts by zhadoom
Verbatim 16x +R ( MCC004 MIT Prodisc ) burned at 20x. OS on.

XV5N-HT694 ( 20x RPM set to 19.3x )
__________________
My drives:
BD-Writer LG BH08LS20 2.00 BD-Writer LG GGW-H20L YL05
Samsung SH-S203B(SB04 FR FB EOPC) - Samsung SH-W162C TS11 - Samsung TS-H552U US09
BENQ 1620 B7W9 - LG H42N@H44N RB01 - Region Reset
LG H10A@H10N@H12N UJ13 - LG H22N 1.02 - LG H55N 1.06 - LG GH22NP20 2.00 - LG GH22NS50
Liteon iHAS122 A DL0N Sony AD-7190A@DH20A3P XV68 - EOHT - FB - FR - EOS / XV6D - Sony G120A@165P6S MS0R
Pioneer DVR-K17 - Pioneer DVR-108 1.18 by nil:
Old Posted: 11-12-2007
C0deKing (Senior Administrator)
Posts: 11,455
  • Find More Posts by C0deKing
PRODISC R03, burned at 12x, OS On (6:02)

Just the disc?
Attached Images
File Type: png D222_XV5N_PRODISC_R03_12x_NS_BS_1.png (41.5 KB, 133 views)
File Type: png D222_XV5N_PRODISC_R03_12x_NS_ES_1.png (37.5 KB, 132 views)
__________________
http://codeguys.rpc1.org/ <-- Firmware page updated!
LiteOn Tools: EEPROM Utility <-- New v6.0.0, Flash Utility <-- New v4.0.0, Settings Utility <-- New v1.2.1
Samsung Tools: Patch Utility <-- New v3.4.10
LiteOn Patches: Fast Read (FR) | Fast Burn (FB) | Enhanced OverSpeed (EOS) | Enhanced Online HyperTuning (EOHT)
BenQ Patches: Fast Burn (FB) | Enhanced SolidBurn (ESB)
Samsung Patches: Fast Read (FR) | Remove RipLock (RLR) | Fast Burn (FB) | Retain book type (BS) | Default DVD-ROM (ROMD)

The man who does things makes mistakes, but he who doesn't makes the biggest mistake of all - doing nothing. Benjamin Franklin

The Forum Rules

Click HERE to join cdfreaks.com
Old Posted: 11-12-2007
default_avatar
Wind (CD Freaks Senior Member)
Posts: 492
  • Find More Posts by Wind
I don't think so if you disable OHT.
As I mentioned to you, some interpolation need be checked by OHT.
Last edited by Wind; 11-12-2007 at 05:00.
Old Posted: 11-12-2007
C0deKing (Senior Administrator)
Posts: 11,455
  • Find More Posts by C0deKing
Perhaps it is for the best to always enable OHT when overspeed burning with HT, but perhaps OHT could be a bit less sensitive to servo feedback, so more media (like my MCC004 above for example) will burn at higher speeds.
__________________
http://codeguys.rpc1.org/ <-- Firmware page updated!
LiteOn Tools: EEPROM Utility <-- New v6.0.0, Flash Utility <-- New v4.0.0, Settings Utility <-- New v1.2.1
Samsung Tools: Patch Utility <-- New v3.4.10
LiteOn Patches: Fast Read (FR) | Fast Burn (FB) | Enhanced OverSpeed (EOS) | Enhanced Online HyperTuning (EOHT)
BenQ Patches: Fast Burn (FB) | Enhanced SolidBurn (ESB)
Samsung Patches: Fast Read (FR) | Remove RipLock (RLR) | Fast Burn (FB) | Retain book type (BS) | Default DVD-ROM (ROMD)

The man who does things makes mistakes, but he who doesn't makes the biggest mistake of all - doing nothing. Benjamin Franklin

The Forum Rules

Click HERE to join cdfreaks.com
Old Posted: 11-12-2007
C0deKing (Senior Administrator)
Posts: 11,455
  • Find More Posts by C0deKing
Some PRODISC R04 scans:
Attached Images
File Type: png D225_XV5N_PRODISC_R04_18x_NS_BS_1.png (40.2 KB, 132 views)
File Type: png D225_XV5N_PRODISC_R04_18x_NS_ES_1.png (37.3 KB, 134 views)
File Type: png D226_XV5N_PRODISC_R04_20x_NS_BS_1.png (39.8 KB, 131 views)
File Type: png D226_XV5N_PRODISC_R04_20x_NS_ES_1.png (36.8 KB, 133 views)
File Type: png D224_XV5N_PRODISC_R04_20x_NS_BS_1.png (42.5 KB, 131 views)
File Type: png D224_XV5N_PRODISC_R04_20x_NS_ES_1.png (38.4 KB, 128 views)
__________________
http://codeguys.rpc1.org/ <-- Firmware page updated!
LiteOn Tools: EEPROM Utility <-- New v6.0.0, Flash Utility <-- New v4.0.0, Settings Utility <-- New v1.2.1
Samsung Tools: Patch Utility <-- New v3.4.10
LiteOn Patches: Fast Read (FR) | Fast Burn (FB) | Enhanced OverSpeed (EOS) | Enhanced Online HyperTuning (EOHT)
BenQ Patches: Fast Burn (FB) | Enhanced SolidBurn (ESB)
Samsung Patches: Fast Read (FR) | Remove RipLock (RLR) | Fast Burn (FB) | Retain book type (BS) | Default DVD-ROM (ROMD)

The man who does things makes mistakes, but he who doesn't makes the biggest mistake of all - doing nothing. Benjamin Franklin

The Forum Rules

Click HERE to join cdfreaks.com
Old Posted: 11-12-2007
toobad (CD Freaks Junior Member)
Posts: 87
  • Find More Posts by toobad
Optiarc 7190A @ LiteON 20A3P XV5N HT694
MCC 004 (Prodisc 7181E - purchased 12/07 from NewEgg), burned at 20x, SB and OS On (5:13)

Burn speed dropped back to 16X near the end of the burn - was this yet another Smart-Burn safety net (OHT and FHT were off) or did my equipment crap out? Disc quality, KProbe and TRT turned out good but jitter was higher than on my Prodisc hub code:5218E MCC 004 previous 4:41 burn (11.7% vs 9.3%).
Attached Images
File Type: png cd.png (33.1 KB, 118 views)
File Type: png dq.png (32.3 KB, 116 views)
File Type: png trt.png (28.6 KB, 117 views)
File Type: png KP.PNG (10.5 KB, 118 views)
File Type: png jitter8x.png (9.5 KB, 117 views)
Old Posted: 11-12-2007
toobad (CD Freaks Junior Member)
Posts: 87
  • Find More Posts by toobad
Optiarc 7190A @ LiteON 20A3P XV5N HT694
MCC 004 (CMC PAPA23LJ - purchased 12/07 from Buy.com), burned at 20x, SB and OS On (4:42)
Attached Images
File Type: png cd.png (33.0 KB, 114 views)
File Type: png dq.png (32.7 KB, 112 views)
File Type: png trt.png (28.5 KB, 113 views)
File Type: png KP.PNG (10.9 KB, 113 views)
File Type: png jitter.png (8.9 KB, 112 views)
Old Posted: 11-12-2007
C0deKing (Senior Administrator)
Posts: 11,455
  • Find More Posts by C0deKing
toobad, try setting your 20x RPM to 19.3x using the EEPROM Utilities "20x RPM" tab. For the sake of a few seconds burn time it can avoid speed fallbacks and improve quality.
__________________
http://codeguys.rpc1.org/ <-- Firmware page updated!
LiteOn Tools: EEPROM Utility <-- New v6.0.0, Flash Utility <-- New v4.0.0, Settings Utility <-- New v1.2.1
Samsung Tools: Patch Utility <-- New v3.4.10
LiteOn Patches: Fast Read (FR) | Fast Burn (FB) | Enhanced OverSpeed (EOS) | Enhanced Online HyperTuning (EOHT)
BenQ Patches: Fast Burn (FB) | Enhanced SolidBurn (ESB)
Samsung Patches: Fast Read (FR) | Remove RipLock (RLR) | Fast Burn (FB) | Retain book type (BS) | Default DVD-ROM (ROMD)

The man who does things makes mistakes, but he who doesn't makes the biggest mistake of all - doing nothing. Benjamin Franklin

The Forum Rules

Click HERE to join cdfreaks.com
Old Posted: 11-12-2007
toobad (CD Freaks Junior Member)
Posts: 87
  • Find More Posts by toobad
Quote:
Originally Posted by C0deKing View Post
toobad, try setting your 20x RPM to 19.3x using the EEPROM Utilities "20x RPM" tab. For the sake of a few seconds burn time it can avoid speed fallbacks and improve quality.
C0deKing - thanks for the tip. However, when I went to change it, it was already at set at 19.3. How precise a setting is that? Plus or minus a few tenths? If not, I don't know why a few of my burns reach 19.5X.

Also, please check my next post. Although I have OHT and FHT unchecked in Smart-Burn, something is adjusting the burn. Is it the running optimal power calibration? Is it (the ROPC) independent of the Hyper Tuning settings? Is it what is causing the fallbacks, especially on lesser quality media?
Old Posted: 11-12-2007
toobad (CD Freaks Junior Member)
Posts: 87
  • Find More Posts by toobad
Optiarc 7190A @ LiteON 20A3P XV5N HT694
Prodisc F02 - Maxell brand, burned at 20x, only SB and OS On (5:05)

I'm impressed by how fast and accurately the 20A3P was able to respond to a bad area(s) on the disc and adjust to save the burn qualtiy on this not so perfect media - even with OHT and FHT disabled.
Attached Images
File Type: png cd.png (35.5 KB, 100 views)
File Type: png dq.png (34.4 KB, 99 views)
File Type: png trt.png (28.6 KB, 98 views)
File Type: png KP.PNG (11.4 KB, 99 views)
File Type: png jitter.png (8.8 KB, 98 views)
Old Posted: 12-12-2007
C0deKing (Senior Administrator)
Posts: 11,455
  • Find More Posts by C0deKing
Quote:
Originally Posted by toobad View Post
C0deKing - thanks for the tip. However, when I went to change it, it was already at set at 19.3. How precise a setting is that? Plus or minus a few tenths? If not, I don't know why a few of my burns reach 19.5X.

Also, please check my next post. Although I have OHT and FHT unchecked in Smart-Burn, something is adjusting the burn. Is it the running optimal power calibration? Is it (the ROPC) independent of the Hyper Tuning settings? Is it what is causing the fallbacks, especially on lesser quality media?
Did you use the "Show 20x RPM" function. The dropdown list on the tab always defaults to 19.3x. Usually the actual RPM is slightly less than the one selected.

Wind would know better than me but usually it is servo information that causes the speed fallback like that and this will happen with or without OHT enabled. Check your 20x RPM again.
__________________
http://codeguys.rpc1.org/ <-- Firmware page updated!
LiteOn Tools: EEPROM Utility <-- New v6.0.0, Flash Utility <-- New v4.0.0, Settings Utility <-- New v1.2.1
Samsung Tools: Patch Utility <-- New v3.4.10
LiteOn Patches: Fast Read (FR) | Fast Burn (FB) | Enhanced OverSpeed (EOS) | Enhanced Online HyperTuning (EOHT)
BenQ Patches: Fast Burn (FB) | Enhanced SolidBurn (ESB)
Samsung Patches: Fast Read (FR) | Remove RipLock (RLR) | Fast Burn (FB) | Retain book type (BS) | Default DVD-ROM (ROMD)

The man who does things makes mistakes, but he who doesn't makes the biggest mistake of all - doing nothing. Benjamin Franklin

The Forum Rules

Click HERE to join cdfreaks.com
Old Posted: 12-12-2007
zhadoom (MyCE Resident)
Posts: 1,271
  • Find More Posts by zhadoom
Verbatim 16x +R ( MCC004 MIT Prodisc ) burned at 20x. OS on.

XV5N-HT694

2nd burn of that media/firmware.
__________________
My drives:
BD-Writer LG BH08LS20 2.00 BD-Writer LG GGW-H20L YL05
Samsung SH-S203B(SB04 FR FB EOPC) - Samsung SH-W162C TS11 - Samsung TS-H552U US09
BENQ 1620 B7W9 - LG H42N@H44N RB01 - Region Reset
LG H10A@H10N@H12N UJ13 - LG H22N 1.02 - LG H55N 1.06 - LG GH22NP20 2.00 - LG GH22NS50
Liteon iHAS122 A DL0N Sony AD-7190A@DH20A3P XV68 - EOHT - FB - FR - EOS / XV6D - Sony G120A@165P6S MS0R
Pioneer DVR-K17 - Pioneer DVR-108 1.18 by nil:
Last edited by zhadoom; 12-12-2007 at 03:54. Reason: added 2nd scan
Old Posted: 12-12-2007
toobad (CD Freaks Junior Member)
Posts: 87
  • Find More Posts by toobad
Quote:
Originally Posted by C0deKing View Post
Did you use the "Show 20x RPM" function. The dropdown list on the tab always defaults to 19.3x. Usually the actual RPM is slightly less than the one selected.

Wind would know better than me but usually it is servo information that causes the speed fallback like that and this will happen with or without OHT enabled. Check your 20x RPM again.
Sorry COdeKing, you were right! When I clicked the tab for 20X RPM it was already showing 19.3 but when I clicked show 20X RPM it was in fact at 19.5. It's now set at 19.3. Thanks!
Old Posted: 12-12-2007
default_avatar
mark_twist (CD Freaks Rookie)
Posts: 30
  • Find More Posts by mark_twist
Wind, is there a chance that this testing firmware would be availaible for DH-20A3L? This drive looks nice but I am planning to move to SATA interface in near future (unless someone can give me a good reason why not to do so?).
WIN your own LG N2B1 NAS with 2TB of Storage!*

To win, tell us why you want to win and tell ,or show us (graphic, video, etc.) why you think Life's Good with LG NAS.
*US only  Not registered yet? Register now!

Hello guest,
default
To benefit from all extra features you need to log in or sign up.
signup log in

Search this Thread

New Posts

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Similar Threads

People who found this also searched for

  • 20x rpm ihas322
  • dh-20a3s patched firmware
  • dh-20al firmware
  • dh-20al site club.myce.com
  • dh20a3 sata firmware
  • dh20a3s
  • dh20a3s firmware
  • dh20a3s firmware codeguys.rpc1.org
  • download driver for philips 20ie
  • dsw2012pa firmware
  • dsw2012sa firmware
  • dx20a3h driver
  • error! scsi status 1
  • firmware 20a3s .bin
  • ht743 liteon
  • lenco xemio 125 firmvare
  • lightscribe unbranded
  • liteon dh-20a3
  • liteon dh-20a3p driver download
  • liteon dh-20a3s firmware
  • liteon modelo lh20a1p descarga gratis
  • mbipg101 r05 001 (01h)
  • optiarc ad-7240s potential 'waitimmediateio' deferred error
  • plds dh-20a3s firmware
  • reason power calibration area error ad-7240s 03rg20
  • sony awg170a 173 firmware download
  • wind's test exe
  • (http club.cdfreaks.com f44 liteon-dh20a3-test-firmware-results-discussion-227621
  • (sony aw-g170a ... lenco xemio 125 firmware; lightscribe unbranded
  • 2012pa driver download
All times are GMT +2. The time now is 13:41.
Top