Hi, all. Happy holidays first off.
So I've been ripping and burning DVDs on this machine (Windows XP SP2) for at least 1.5 years w/ very few problems. I went 3-4 months w/o ripping or burning anything and started up again yesterday only to encounter some problems.
Nero Burning ROM 7 and 8 are having problems writing DVDs. Last night w/
Nero 7 I received two "Drive not ready" errors. So I updated the drive's firmware and a third burn attempt succeeded. I assumed I'd fixed it and went to bed.
Unfortunately, I got another "Drive not ready" error this evening. What happens is Nero 7 gets 3% into the process. It's actually written data (I can see it on the disk when I remove it) but then I hear the drive spin up a couple times and then Nero errors out with the "Drive not ready" error. I upgraded to Nero 8 and attempted w/ that. One burn worked and then I got another "Drive not ready" error (w/ Nero 8 it occurs at 1%, not sure if that matters). Then another burn attempt worked.
Below is the Nero 8 log from one of the failures. Is there anything I can do to fix it or is my drive going bad?
Thanks!
(the H and I drives are Daemon Tool virtual drives)
(If you need what I snipped from under "Media specific" let me know and I'll post it. Had to snip it so the whole log would fit in this post)
Code:
Windows XP 5.1
IA32
WinAspi: -
NT-SPTI used
Nero Version: 8.1.1.0
Internal Version: 8, 1, 1, 0
Recorder: Version: PS0B - HA 1 TA 0 - 8.1.1.0
Adapter driver: HA 1
Drive buffer : 2048kB
Bus Type : default
CD-ROM: Version: PS0B - HA 1 TA 0 - 8.1.1.0
Adapter driver: HA 1
=== Scsi-Device-Map ===
CdRomPeripheral : LITE-ON DVDRW SHW-160P6S atapi Port 1 ID 0 DMA: On
DiskPeripheral : WDC WD1200JB-75EVA0 atapi Port 4 ID 0 DMA: On
DiskPeripheral : WDC WD2000JS-22NCB1 nvatabus Port 5 ID 0 DMA: Off
CdRomPeripheral : OW3402X QCE546R 1.0 dtscsi Port 6 ID 0 DMA: Off
CdRomPeripheral : OW3402X QCE546R 1.0 dtscsi Port 6 ID 1 DMA: Off
=== CDRom-Device-Map ===
LITE-ON DVDRW SHW-160P6S E: CdRom0
OW3402X QCE546R H: CdRom1
OW3402X QCE546R I: CdRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2047MB (2096624kB)
Free physical memory: 1515MB (1552320kB)
Memory in use : 25 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
21.12.2007
UDF/ISO compilation
7:48:47 PM #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
7:48:48 PM #2 Phase 112 File dlgbrnst.cpp, Line 1764
DVD-Video files reallocation started
7:48:48 PM #3 Phase 114 File dlgbrnst.cpp, Line 1764
DVD-Video files reallocation completed (no file modified)
7:48:48 PM #4 Text 0 File Isodoc.cpp, Line 6671
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
7:48:48 PM #5 Phase 111 File dlgbrnst.cpp, Line 1764
DVD-Video files sorted
7:48:48 PM #6 ISO9660GEN -11 File Geniso.cpp, Line 3347
First writeable address = 0 (0x00000000)
7:48:48 PM #7 ISO9660GEN -11 File Geniso.cpp, Line 3347
First writeable address = 0 (0x00000000)
7:48:48 PM #8 Text 0 File Burncd.cpp, Line 3530
Turn on Disc-At-Once, using DVD media
7:48:48 PM #9 Text 0 File FilesystemSettingsValidator.cpp, Line 142
FS Settings: using validator 'CUDFSettingsValidatorDVD'
ParamMode = 'automatic', changing UDF partition type from 'physical' to 'physical'
Changing UDF revision from '1.02' to '1.02'
7:48:49 PM #10 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286223 (508:02.73, 4465MB)
7:48:49 PM #11 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)
7:48:49 PM #12 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: LITE-ON DVDRW SHW-160P6S, Media type: DVD-R
Disc Manufacturer ID: <>
Disc Application Code: 64, Disc Physical Code: 193
7:48:49 PM #13 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
7:48:49 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 785
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286224 (2286224) = #2286224/508:2.74
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286224 blocks [E: LITE-ON DVDRW SHW-160P6S]
--------------------------------------------------------------
7:48:49 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 986
Prepare [E: LITE-ON DVDRW SHW-160P6S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4682186752, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2286224 | 0 | 0x00
2286224 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
7:49:09 PM #16 Text 0 File SCSIPTICommands.cpp, Line 264
Error on LockVolume: Access is denied.
7:49:09 PM #17 Text 0 File SCSIPTICommands.cpp, Line 314
SPTI - Error 5 on DismountVolue: Access is denied.
7:49:19 PM #18 Text 0 File SCSIPTICommands.cpp, Line 264
Error on LockVolume: Access is denied.
7:49:19 PM #19 Text 0 File Burncd.cpp, Line 4316
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)
7:49:19 PM #20 Phase 24 File dlgbrnst.cpp, Line 1764
Caching of files started
7:49:19 PM #21 Text 0 File Burncd.cpp, Line 4435
Cache writing successful.
7:49:19 PM #22 Phase 25 File dlgbrnst.cpp, Line 1764
Caching of files completed
7:49:19 PM #23 Phase 36 File dlgbrnst.cpp, Line 1764
Burn process started at 8x (11,080 KB/s)
7:49:19 PM #24 Text 0 File ThreadedTransferInterface.cpp, Line 2735
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
7:49:19 PM #25 Text 0 File DVDR.cpp, Line 3245
Recording mode: Sequential Recording Mode
7:49:19 PM #26 Text 0 File DVDR.cpp, Line 3401
Start write address at LBA 0
DVD high compatibility mode: Yes
7:49:19 PM #27 Text 0 File Cdrdrv.cpp, Line 10026
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
Outer Limit of Data Recordable Area: 26127F h
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: -
Revision number of minimum recording speed: -
Revision number table of recording speed: - - - - - - -
Class: 0, Extended part version: 0
Start PSN of the Extra Border Zone: 0 h
Start PSN of Physical format information blocks in Extra Border Zone: 0 h
Media Specific [16..783]:
7:49:19 PM #28 Text 0 File ThreadedTransfer.cpp, Line 268
Pipe memory size 83836800
7:49:42 PM #29 Text 0 File Cdrdrv.cpp, Line 1367
19:49:42.936 - 㩅䰠呉ⵅ乏䐠䑖坒匠坈ㄭ〶㙐S : Queue again later
7:50:20 PM #30 SPTI -1033 File SCSIPassThrough.cpp, Line 181
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1033)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x01
CDB Data: 0x2A 00 00 00 14 40 00 00 20 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 01
Buffer x088128c0: Len x10000
0x00 00 01 BA 44 01 A7 32 F4 01 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 18 8E 0C 60 03 50 82 33 03
0x57 FF 8B 80 E8 38 7F FC 0E 5F FF 03 FF FF D4 04
7:50:20 PM #31 CDR -1033 File Writer.cpp, Line 306
Drive not ready
E: LITE-ON DVDRW SHW-160P6S
7:50:32 PM #32 Text 0 File DVDR.cpp, Line 3803
EndDAO: Last written address was 5183 (143Fh)
7:50:32 PM #33 CDR -1033 File WriterStatus.cpp, Line 162
Drive not ready
E: LITE-ON DVDRW SHW-160P6S
7:50:32 PM #34 TRANSFER -24 File WriterStatus.cpp, Line 162
Could not perform end of Disc-at-once
7:50:32 PM #35 Phase 38 File dlgbrnst.cpp, Line 1764
Burn process failed at 8x (11,080 KB/s)
7:50:33 PM #36 Text 0 File SCSIPTICommands.cpp, Line 314
SPTI - Error 5 on DismountVolue: Access is denied.
7:50:35 PM #37 Text 0 File Cdrdrv.cpp, Line 11276
DriveLocker: UnLockVolume completed
7:50:35 PM #38 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Posted: 22-12-2007 
Since it's working, I'll not worry about why I didn't have to do that before. 
