Post your 18x burn scans/TRTs here!

adelphia83 · 19-12-2006

Here's a few scans on CMC media, and CMC-made verbatim, and verbatim dvd-r 16x. All burns were done at 18X on my Optiarc 7170A. I should have a few scans of the liteon drive @ 18x in the forseeable future.

Embedded Images

View/download images and remove advertisements by registering now! (it's easy, free and takes less than a minute)

You must be registered in order view images in this forum.

Embedded Images

View/download images and remove advertisements by registering now! (it's easy, free and takes less than a minute)

You must be registered in order view images in this forum.

Embedded Images

View/download images and remove advertisements by registering now! (it's easy, free and takes less than a minute)

You must be registered in order view images in this forum.

*TL0* · 19-12-2006

Quote:

Originally Posted by dicer

While Benq can read it back fine (and the Lite-On burner), when you run this disc on a picky drive it struggles. The 16P9S is only slightly picky. Keep in mind the old 166s can read back good quality discs flawlessly.

Then the 166s drive should be the only TRT results you should trust

**Arachne** · 21-12-2006

Some CMC-made MCC004 here to go with the MII and Prodisc ones I posted earlier:

*cd pirate* · 24-12-2006

Here's an 18x burn of Daxon AZ3
Written and tested with LH-18A1P GLOC

1st picture: Create disc
2nd picture: PI/PIF/Jitter test @4x
3rd picture: PI/PIF Test @ 8x
4th picture: TRT test @ 16x with LG 4167B

*cd pirate* · 25-12-2006

Here's an 18x burn of MCC004
Written with LG H22N and tested with LH-18A1P GLOC

1st picture: Create disc
2nd picture: PI/PIF/Jitter test @4x
3rd picture: PI/PIF Test @ 8x
4th picture: TRT test @ 16x with LG 4167B

Excellent result. I am really pleased with how good this burner writes at high speeds. The written side of the disc also looks quite nice and doesn't have any weird looking dye effects. It basically looks like it may have been burned at 8x

*kg_evilboy* · 25-12-2006

But the jitter increases steadily

*cd pirate* · 25-12-2006

Wipe that frown off your face boy

The max and average level of jitter is still lower compared to the liteon's daxon AZ3 burn.

BTW merry X-mas!

Cressida · 30-12-2006

My farewell scan to the LH-18A1P with Verbatim T03 (TH000021). Not bad for this spindle

adelphia83 · 21-01-2007

Lets see some of the best 16-20x burns... I was pleasantly suprised with these results, as I've had a hard time with most media at high speeds, and was about to give up on those speeds entirely. TY take this.

Media was Verbatim 16x Lightscribe.

**Arachne** · 21-01-2007

You can find a bunch of 18x scans/TRTs right here

*DrageMester* · 21-01-2007

* * Merged threads * *

19-12-2006	#26
adelphia83 MyCE Senior Member Join Date: Jun 2005 Location: Missouri, USA Posts: 327	Re: Post your 18x burn scans/TRTs here! Here's a few scans on CMC media, and CMC-made verbatim, and verbatim dvd-r 16x. All burns were done at 18X on my Optiarc 7170A. I should have a few scans of the liteon drive @ 18x in the forseeable future. Embedded Images View/download images and remove advertisements by registering now! (it's easy, free and takes less than a minute) You must be registered in order view images in this forum. Embedded Images View/download images and remove advertisements by registering now! (it's easy, free and takes less than a minute) You must be registered in order view images in this forum. Embedded Images View/download images and remove advertisements by registering now! (it's easy, free and takes less than a minute) You must be registered in order view images in this forum.

25-12-2006	#31
kg_evilboy CD Freaks Boy Toy Join Date: Feb 2006 Location: Berlin, Germany Posts: 5,751	Re: Post your 18x burn scans/TRTs here! But the jitter increases steadily __________________ I'm a 太陽誘電の記録メディア fanboy. Stick to it and you most likely won't have any trouble (with degradation or compatibility and write errors). Preferred media codes: CD-R 97m24s01f; CD-RW 97m34s24f; DVD+R YUDEN000 T03; DVD-R TYG03; DVD+RW MKM A03; DVD-RW MKM 01RW6X; DVD+R DL MKM 003; DVD-R DL I avoid that format Facebook page: Say NO to overpriced books in Germany My collection: Plextor PX-716UF 1.09 (TLA #0202), Optiarc AD-7200A 1.06, Samsung SE-S224Q TS02, Plextor PX-712UF 1.04 (TLA #0104), Plextor PX-708UF2 1.02 (TLA #0102), Optiarc AD-7200A 1.06, Plextor PX-716UF 1.07 (TLA #0307), Lite-On LH-18A1H HL05, Philips JackRabbit JR32RWDVK P1.3, Philips JackRabbit JR24CDRW 1.01, LG GH22NP20 2.00, Matshita UJ-898 HC10, Lite-On LH-20A1H LL0D, Plextor PX-716UF 1.11 (TLA #0204), LG GSA-H22N 1.00, Plextor PX-716A 1.09 (TLA #0309) + Plextor PX-716A 1.09 (TLA #0309), BenQ DW1655 BCDB, Samsung TS-L632B TM31, Lite-On LTR-16101B TS0W Lite-On SHM-165P6SU MS0P (mechanical failure), Plextor PX-708UF2 1.?? (TLA #0102) (DVD optical part died), LG GSA-H10N @ H12N UJ12 (broken tray), BenQ DW1650 BCIC (sold), Lite-On SHW-16H5S @ 1635S YS0Z (lost in a fire), LG GCE-8527B 1.04 (optical part died), Samsung TS-L632H SC04 (sold), Canon Pixma iP4300 (printer head broken)

25-12-2006	#32
cd pirate MyCE Resident Join Date: Jul 2002 Location: Australia Posts: 3,294	Re: Post your 18x burn scans/TRTs here! Wipe that frown off your face boy The max and average level of jitter is still lower compared to the liteon's daxon AZ3 burn. BTW merry X-mas!

21-01-2007	#35
Arachne Senior Administrator & Reviewer Join Date: Nov 2005 Location: Tabby Towers, West of England Posts: 33,796	Re: Who says it's bad to burn at 18x? You can find a bunch of 18x scans/TRTs right here __________________ Current drives: Samsung SE-S084C (TS02) + Samsung SH-S223F (SB03 RPC1 + other goodies) + TSST (Samsung) TS-H653F (DW10) + Samsung SH-S203N (SB02 RPC1 + other goodies) + Optiarc AD-5170S (1.12) + Litey LH-20A1H (LL0D) + Samsung SH-S182D (SB06 RPC1) x2 + LG E10N (JE07) + BenQ DW1650 (BCDC) + BenQ DW1640@164B (BEFB) + LG 4167B (DL13 TDB) + NEC ND-4551A (1.Z2) + LG GCE-8520B (1.00) + LiteOn SOHR-5239S (2S0B) Retired: LiteOn LDW-851@SOHW-832 + LiteOn SOHW-1693S + LG 4163B + Pioneer DVR-115D My Review PCs How to delete your upper and lower filters : How to check/enable DMA by Womble Click here to join MyCE.com and be part of our friendly community! Smile...people will wonder what you're up to

21-01-2007	#36
DrageMester Retired Moderator Join Date: Oct 2004 Location: Honah Lee Posts: 19,904	Re: Post your 18x burn scans/TRTs here! * * Merged threads * *

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Dare! Post your Plextor 18x scans here	zevia	Plextor Writer	12	13-11-2006 12:21
Overburning! Post scans here!	Scheirmes	Plextor Writer	7	08-08-2006 18:28
Post your Samsung 18x scans here	C0deKing	Samsung / Toshiba / TSST Writer	8	05-08-2006 03:42
Post your Philips SPD2400 scans here	DJouneyt	BenQ / Philips Writer	7	27-06-2006 11:40
Can someone post some images of scans?	peter762033	Blank Media	16	25-04-2006 08:51