Go Back   Club Myce > Software > General Software



Reply
 
LinkBack Thread Tools
Old 08-09-2002   #1
CD Freaks Member
 
Join Date: Aug 2002
Posts: 203
Quality of CD-Rs and audio quality

Hi. I recently made backups of a couple of CDs by The Corrs, after running ClonyXXL I found only rudimentary copy protection and was able to copy it using CloneCD with no hassle.

On playing it, some songs were fine, but others had skipping sections and distortion of the music (at one point their voices sounded robotically male )

I copied those CDs onto one of those "al Cheapo" CDs you buy in bulk. Another set (of completely different audio CDs) which I copied onto another bunch of cheap CDs, but from a different supplier, had no audible degradation of music quality.

Basically, were the problems I encountered due to poor CD quality, copy protection or bad copy technique?

I'm puzzled as to why the audio CDs would have an audible degradation of quality when I backup them onto those cheap CD-Rs, whilst I do not get any read errors when I use those same CDs to backup software and test them with a full install. Is audio data more susceptible to CD quality than your usual 'program' data?
Devils Advocate is offline   Reply With Quote
Old Today
Register to remove me
 
 
Join Date: Today
Location: Myce HQ
Posts: Zillions
Old 08-09-2002   #2
MyCE Resident
 
Upp3rd0G's Avatar
 
Join Date: Oct 2001
Location: NL
Posts: 2,116
Data cds have an extra level of errorcorrection/detection which might make up for the bad quality of the recorded cd. Audio cds don't have this.

Factors which might decrease the quality of the backup:

quality of source disk
quality of target disk
quality of reading source disk (that is: how good is your reader)
quality of writing target disk (that is: how good is your writer)
copy protections
copy techniques (not really important factor)

In your case first I would try a better cd-recordable.
__________________
Upp3rd0G is offline   Reply With Quote
Old 21-09-2002   #3
CD Freaks Junior Member
 
Join Date: Sep 2002
Location: Philippines
Posts: 58
try burning at a lower speed.... 4x max for audio cds and be sure that you have ripped the tracks properly (listen to them first before you burn them onto a cd... you may have not ripped them clean)
__________________
Death to Copy Protection Schemes!
tangise is offline   Reply With Quote
Old Today
Always the best offers
 
 
Join Date: Today
Location: Myce HQ
Posts: Zillions
Old 22-09-2002   #4
CD Freaks Junior Member
 
Join Date: Jul 2002
Posts: 96
Lol, same answer as in your other post
JoeSoap is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Do the 1620s have problems reading low quality CD-Rs? portent BenQ / Philips Writer 3 21-02-2005 08:14
liteon write quality and quality DVD-Rs jarthel Blank Media 4 19-06-2004 00:48
God Help us from these low quality CD-Rs Salil_S Blank Media 2 17-06-2004 19:15
How to burn crappy CD-Rs with maximum quality? M-M-C LiteOn / PLDS / Sony Writer 3 08-03-2003 15:26
Does Burning Speed & CD-R Media quality affect the Quality of an Audio CD? darshanjog Newbie Forum 7 23-02-2002 06:58


All times are GMT +2. The time now is 00:14.
Top