Help, cant burn Age Of Empires 2 - The Age Of Kings
| Clone CD Discuss, Help, cant burn Age Of Empires 2 - The Age Of Kings at Burning Software forum; Hey I have a Lite-ON 12101B(flash Creative 1210E) and have an original Age Of Empires 2 disc which i have been unable to sucessfully backup. I have CloneCD 4.0.1.9 and im burning onto either Kodak 80min cd, princo 80min cd or Pirnco 80min cd. i have made countless coasters and |
Posted: 16-07-2002 - #1
| Hey I have a Lite-ON 12101B(flash Creative 1210E) and have an original Age Of Empires 2 disc which i have been unable to sucessfully backup. I have CloneCD 4.0.1.9 and im burning onto either Kodak 80min cd, princo 80min cd or Pirnco 80min cd. i have made countless coasters and the last time i burnt it i ended up with a cd with 2 audio tracks on it. i use clony xxl and the settings it tells me. also do i create an image or burn on the fly? a full list of setting (on/off) would be great. thanx in advance for any help stewy |
- Today (MyCE Staff)
- Posts: 15,596
| |
Posted: 16-07-2002 - #2
| Age of Kings uses SD1 protection...  Fast Error Skip=on Reading speed=MAX You should create image file first and then burn it into a CDR disc... cause the SD1 contains with numberous logical error sectors  Remember to burn the image by RAW DAO method ... If above can't help you... You may give FantomCD a try... The settings for SD1 are enabled automatically... |
Posted: 16-07-2002 - #3
| Quote:
 |
Posted: 16-07-2002 - #4
| Quote:
Lite-ons have encountered some problems with the latest securom protection found on some new game titles. This is not related to clonecd by any means. There has been a problem with the "hide cdr media" option of ccd's tray which has been related to lite-ons among other drives. I'm not sure but i think this has been fixed on ccd's last version
__________________ [Airhead]: How the devil?! I got 69! I am a french lesbian! *Hemi HATES wallpapers AND pickles* ........ never forget that *There is one thing more evil than pickles, and that is STATISTICS...* |
Posted: 16-07-2002 - #5
| ey thanx for ur hlp pplzl, i just downloaded deamon tools and mounted an image i made wif ccd, and it works. noiw can u plz giv me the settings to burn. fanxxxx stewy |
Posted: 16-07-2002 - #7
| Quote:
 Mostly affected securerom protected titles anyway. |
Posted: 17-07-2002 - #8
| WEll people i had a go at burning the working image i had. i used the defult game cd profile and at 56% I got an error message. The exact message is Writing to CD failed, HARDWARE ERROR: TRACKING SERVO FAILURE (4:0x09:0x01) Any idea what this means? Thanx Stewy |
So your writer should be fine Posted: 17-07-2002 - #10
| olli or ne1 else can u giv us a hand here, im sick to death of coasters! thanx |
Posted: 17-07-2002 - #11
| Quote:
Nero states the following as possible reasons: "This error message appears for one of the following reasons: *The CD Writer has problems writing on the CD-R/RW. Please resort to another brand mark of CD-R/RW. Please ask the vendor of your CD burner for recommended brands of CD-R/RW. You will also find information in problematic CD-R/RW. *The power supply of your computer is not providing enough power. *You are using an external device. Please check the power supply and for test purposes install the burner in the computer. Numerous graphics cards require a lot of power. The same goes for numerous CPUs and some harddisks. *the mains cable or the plug is defective. Please use another plug cable for test purposes. *The computer vibrates to such an extent that the laser can not stay in the track. In particular if a CD-ROM drive is being used as the read drive. *The device has become hot Only operate in cool conditions. *If you have one of the following CD Writer: Grundig CDR100IPW, HP 4020, Kodak CDR240, Mitsubishi CDVR2X4, Mitsumi CD-R CR-2401TS, Philips CDD2000, Plasmon CDR4220, Plasmon RF4100, Plasmon RF4102, Wearnes CDR-432 or are using one of the following types of HP 6020, Mitsubishi CDVR2X6, Mitsubishi CDVR, Philips CDD2600, Wearnes CDR-632P , then it yould be a case of the well-known grease problem. In particular if the error has only been occurring recently. Other CD Writerare also affected, in which it may help to grease the axles with silicon grease (Warning: We don't guarantee anything!) *The lens of the write laser is dirty. the CD-R itself is not clean or is of bad quality. In particular if writing with 8x, conditions like this become noticeable. If 80 minute CD-Rs are being used, then the cause can be that the track distance is too small, on the limit of the specification. It is possible that you are using a CD Writer , which has problems writing on these. *Older driver versions of the file CDR4VSD.VXD (driver from Easy CD) also cause the above mentioned error message The error message can also occur if the CD Writer has not been set up correctly. Please set the system settings as described in recommended settings . *One case is known in which the error message appeared after exchanging the mother board. After newly setting up the motherboard (including formatting), the problem was solved. *Or there is a hardware problem."
__________________ [Airhead]: How the devil?! I got 69! I am a french lesbian! *Hemi HATES wallpapers AND pickles* ........ never forget that *There is one thing more evil than pickles, and that is STATISTICS...* |
Posted: 17-07-2002 - #12
| Quote:
Daemon Tools :http://www.daemon-tools.com/main.htm
__________________ Asus-The Brand You Know And Trust. |
Posted: 19-07-2002 - #13
| Well this time i used a cd-rw and used the settings from clony xxl to burn (after scanning the mounted image) this time at 21% i recieved an error message: Writing to CD failed, ILLEGAL REQUEST: INVAILD COMMAND OPERATION CODE (5:0x20:0x00) What now? thanx pplz ps. the image is a perfect image, i can play the game using it with deamon tools. |
Posted: 19-07-2002 - #15
| wat can i do to solve this hardware problem? |
Posted: 19-07-2002 - #16
| Quote:
1, Try updating bus/chipset drivers 2. Read through nero tips about this matter (the ones prior to the last) and see if any of them apply to your case 3. Invalid command codes usually come up due to interaction with other burning applications, usually easy cd or something. It could be a driver conflict between them. Try uninstalling possible conflicting software
__________________ [Airhead]: How the devil?! I got 69! I am a french lesbian! *Hemi HATES wallpapers AND pickles* ........ never forget that *There is one thing more evil than pickles, and that is STATISTICS...* Last edited by Hemispasm; 19-07-2002 at 13:03. |
There's more to MyCE.com
Listen up, we've got more. Product information on 107,830 products. Our experts have written 540 articles. We've gathered 16,488 news items for you to always keep updated.
Posting Rules
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
People who found this also searched for
- age of empire 2 to a thumb drive and use it on another computer
- age of empires 2 clonecd
- age of empires age of kings disk image
- age of empries2
- a download to let you play age of empire 2 age of kingswith out the disk
- age empires 2 cd image
- age empires 2 mini image
- age of conquerors image file
- age of empire 2 cd image
- age of empire 2 clonecd
- age of empire 2 compatabiltiy burned grass
- age of empire 2 image cd
- age of empire 2 image datei
- age of empire 2 mini image
- age of empire 2 on flash drive
- age of empire 2 the return of the king setup eror
- age of empire 3 cdr
- age of empire ii daemon tool
- age of empire ii daemon tools
- age of empire ii fixed image
- age of empire the conqueror fixed image
- age of empires 1 disk 2
- age of empires 2 - the age of kings.ccd
- age of empires 2 age of kings minimum system request
- age of empires 2 age of kings mp3 rip
- age of empires 2 burn cd
- age of empires 2 burning to cd
- age of empires 2 can't copy disc
- age of empires 2 cd image
- age of empires 2 cd image datei