CCD 4 Is changing my IDE drives to SCSI
| Clone CD Discuss, CCD 4 Is changing my IDE drives to SCSI at Burning Software forum; After installing the latest version of CCD (4.2.0.2), I found it would not burn any images at all. After checking my device manager, ALL of my drivers (both HDD's and CD-RW) had been changed to SCSI. I have tried uninstalling, re-installing without Clonedrive, XP System restore, manually updating each driver |
Posted: 03-01-2003 - #1
| After installing the latest version of CCD (4.2.0.2), I found it would not burn any images at all. After checking my device manager, ALL of my drivers (both HDD's and CD-RW) had been changed to SCSI. I have tried uninstalling, re-installing without Clonedrive, XP System restore, manually updating each driver - everything I can think of. I ended up doing a complete OS re-install because I couldn't even get other burn software to work (it could not find a CD-R drive). Any ideas? This is really a pain... Sys Info: XP Home (all Service packs) AMD Athlon 2700+ MOBO Leadtek Research Inc. WinFast nVidia CR18D/G 1024GB Corsair RAM HDD 0 - WDC WD1200JB-75CRA0 (111.8GB) (120GB) HDD 1 - WDC WD400BB-00CFC0 (37.3GB) (40 GB) IDE DVD-ROM 16X (CD 48X Rd) (DVD 6X Rd) IDE PLEXTOR CD-R PX-W4824A (CD 40X Rd, 48X Wr) TIA
__________________ Welcome to the Machine... - Driggz |
- Today (MyCE Staff)
- Posts: 15,596
| |
Posted: 05-01-2003 - #2
| I've checked on 2 different forums, nothing yet... 
__________________ Welcome to the Machine... - Driggz |
Posted: 05-01-2003 - #3
| I have emailed Olli & Sven Rhode Quote:
__________________ :ÐowN AsS ± ßû(r)NêR:
|
Posted: 09-01-2003 - #4
| Does anyone think adding a new hardware profile to XP would help me recover from this easier? 
__________________ Welcome to the Machine... - Driggz |
Posted: 09-01-2003 - #5
| Ah yes. I have had this problem but didnt put it down to Clone CD at first. I formatted a week or two ago and all drives looked fine in device manager after the format. I have installed latest Clone CD again and all drives are now SCSI in control panel. I lose no performence however. This may indicate that this is just a cosmetic issue. Any ideas Clone CD?? |
Posted: 10-01-2003 - #6
| What IDE drivers are you using ??? cuz the Nvidia Enhanced IDE drivers do that too everyone on all burnning programs.Give a try with the IDE drivers that come with XP.... Clone CD is a good friend  not a SCSI trouble maker  Last edited by FastGame; 10-01-2003 at 03:28. |
Posted: 10-01-2003 - #7
| Yes, IDE drivers can be a devil and the nVIDIA drivers are 'untried', I suspect, by the replication developers. If you uninstall the chipset drivers then XP will try to reload the same chipset drivers (PnP) so the unintsall must be good. I don't think SP1 included drivers for the nVIDIA chipset so it may not work. Are there any later chipset drivers from Leadtek or nVIDIA? Why no reply from Olli or Sven?! |
Posted: 10-01-2003 - #8
| Nope. I have no Nvidea components in my PC. This is deffinently Clone CD fault. |
Posted: 14-01-2003 - #9
| I have the latest firmware for my CDRW, BIOS, and Chipset. I have also tried it with the XP IDE drivers... I don't think it's a Nvidia issue. I have CDMATE, Fireburner, and Nero working without a problem. I would like to try a few more things, but re-formatting - while it gave me something interesting to do for a while - has lost it's appeal. 
__________________ Welcome to the Machine... - Driggz |
There's more to MyCE.com
Listen up, we've got more. Product information on 107,830 products. Our experts have written 523 articles. We've gathered 16,131 news items for you to always keep updated.
