NEC ND-4550A via USB 2 enclosure & Taiyou Yuden DVD-R produced coaster after coaster

Hello guest,
default
To benefit from all extra features you need to log in or sign up.
External Enclosures Discuss, NEC ND-4550A via USB 2 enclosure & Taiyou Yuden DVD-R produced coaster after coaster at CD and DVD Writers forum; My first test burn using NEC ND-4550A and TY DVD-R was disappointing – producing coaster after coaster. I’d appreciate someone could help find out causes of problems and hopefully fix them. Quote:

default_avatar
concerned807 (New on Forum)
Posts: 25
Posted: 30-11-2005
My first test burn using NEC ND-4550A and TY DVD-R was disappointing – producing coaster after coaster. I’d appreciate someone could help find out causes of problems and hopefully fix them.

Quote:
Hardware/Software Setup
- NEC ND-4550A with firmware 1.06 (purchased in Japan)
Inside enclosure and burning via USB 2 interface
- Coolmax 5.25” enclosure Fireware/USB2 Combo
- Taiyou Yuden DVD-R 8X (YUDEN000-T02 made in and purchased in Japan)
- Dell Inspiron 5150 (Mobile Intel Pentium CPU at 3.06GHz | RAM 1GB | HD
60GB at 7200RPM)
- Windows XP Pro SP2
- Nero 6.6.0.16
- Other burning software installed: Alcohol 120% (two virtual DVD drives
generated by A120% as seen in Nero Log)
My goal of the test was to burn data - some Divx/Xvid movies. I first burned four DVD+RW (Ricoh 4X | made in Taiwan) successfully. Pleased, I put my shiny TY DVD-R and set at 4X for burning. Nero barely was able to initiate the burning process. Bang! Then the following error…... The following is excerpt of the error message. I will provide a complete Nero log in the end of my post.

Quote:
4:13:43 PM #25 CDR -500 File Writer.cpp, Line 311
SCSI command aborted
_NEC DVD_RW ND-4550A\H3 T0

4:13:43 PM #26 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

4:13:43 PM #27 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

4:13:43 PM #28 Text 0 File DVDR.cpp, Line 2774
EndDAO: Last written address was -1

4:14:28 PM #29 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)
After the first coaster was produced, I subsequently tried burning TY DVD-R at lower and higher speeds 2X and 8X, but only the same problem reoccurred.

I am completely lost at sea about caused of the problem. Was any software setting wrong? Was I not using the right firmware? Was using the drive inside enclosure via USB 2 was a bad idea? Or the drive itself was faulty?

Again, thanks for your kind help.
default_avatar
Today (MyCE Staff)
Posts: 15,596
default_avatar
concerned807 (New on Forum)
Posts: 25
Posted: 30-11-2005
Complete Nero Log for failed burning

Quote:
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 8/15/2002 3:03:36 AM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b

Recorder: <_NEC DVD_RW ND-4550A> Version: 1.06 - HA 3 TA 0 - 6.6.0.16
Adapter driver: <> HA 3
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA 2 TA 0 - 6.6.0.16
Adapter driver: <a347scsi> HA 2

=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST RW/DVD GCC-4241N atapi Port 0 ID 0 DMA: On
DiskPeripheral : HTS726060M9AT00 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 2 ID 0 DMA: Off
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 2 ID 1 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST RW/DVD GCC-4241N D: CDRom0
AXV CD/DVD-ROM M: CDRom1
AXV CD/DVD-ROM N: CDRom2
_NEC DVD_RW ND-4550A G: CDRom3
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1047916kB)
Free physical memory: 438MB (448988kB)
Memory in use : 57 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

29.11.2005
ISO compilation
4:13:37 PM #1 Text 0 File Isodoc.cpp, Line 6356
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

4:13:37 PM #2 Text 0 File Reader.cpp, Line 127
Reader running

4:13:37 PM #3 Text 0 File Writer.cpp, Line 122
Writer _NEC DVD_RW ND-4550A running

4:13:37 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

4:13:37 PM #5 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

4:13:37 PM #6 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2147567 (477:14.17, 4194MB)

4:13:37 PM #7 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD DVD)

4:13:37 PM #8 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: _NEC DVD_RW ND-4550A, Media type: DVD-R
Disc Manufacturer: TYG02 -
Disc Application Code: 64, Disc Physical Code: 193

4:13:37 PM #9 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================

4:13:37 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2147568 (2147568) = #2147568/477:14.18
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2147568 blocks [_NEC DVD_RW ND-4550A]
--------------------------------------------------------------

4:13:37 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [_NEC DVD_RW ND-4550A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4398219264, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2147568 | lead-out | 1 | 0x41 | 0x00

4:13:37 PM #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

4:13:38 PM #13 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.

4:13:38 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

4:13:38 PM #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)

4:13:38 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

4:13:38 PM #17 Text 0 File DVDR.cpp, Line 2379
Recording mode: Sequential Recording Mode

4:13:38 PM #18 Text 0 File Mmc.cpp, Line 21708
Set BUFE: Buffer underrun protection -> ON

4:13:38 PM #19 Text 0 File DVDR.cpp, Line 2534
Start write address at LBA 0
DVD high compatibility mode: Yes

4:13:38 PM #20 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

4:13:42 PM #21 SCSI -500 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x042C0000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

4:13:42 PM #22 SCSI -500 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x049E1400
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

4:13:42 PM #23 Text 0 File Mmc.cpp, Line 19340
Writer-Buffer for _NEC DVD_RW ND-4550A\H3 T0 reduced to 32768Bytes

4:13:43 PM #24 SCSI -500 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x03A46800
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

4:13:43 PM #25 CDR -500 File Writer.cpp, Line 311
SCSI command aborted
_NEC DVD_RW ND-4550A\H3 T0

4:13:43 PM #26 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

4:13:43 PM #27 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

4:13:43 PM #28 Text 0 File DVDR.cpp, Line 2774
EndDAO: Last written address was -1

4:14:28 PM #29 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)


Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 8/15/2002 3:03:36 AM
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 2/1/2005 2:03:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\a347scsi.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 4/30/2004 9:33:00 AM (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
There's more to MyCE.com

Listen up, we've got more. Product information on 102,541 products. Our experts have written 521 articles. We've gathered 16,068 news items for you to always keep updated.

Active Commenters

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Similar Threads

All times are GMT +2. The time now is 23:05.
Top