Settings for Taiyo Yuden Inkjet Printable
| Disc Printing and Labeling Discuss, Settings for Taiyo Yuden Inkjet Printable at CD and DVD Writers forum; Hi - I'm looking for the settings / dimensions for the printable dimensions for a Taiyo Yuden inkjet printable DVD-R. Thanks! I am using Epson Print CD so I can enter in as a Custom setting. Thanks! Alexa |
Posted: 28-10-2008 - #1
| Hi - I'm looking for the settings / dimensions for the printable dimensions for a Taiyo Yuden inkjet printable DVD-R. Thanks! I am using Epson Print CD so I can enter in as a Custom setting. Thanks! Alexa |
- Today (MyCE Staff)
- Posts: 15,596
| |
Posted: 28-10-2008 - #2
| Assuming you don't possess a ruler, you'd need to tell us what type disc you have. Silver or white? Hub-printable or not? The outside will be 118mm on any of those.
__________________ Current drives running here: LG-GSA-H62N, iHBS 112-2, LTR-52246S, iHAP 422 |
Posted: 28-10-2008 - #3
| not a ruler in my house with mm. looking for insider measurement mostly as the circle of unprintable area by default for Epson CD print looks larger. white. hub-printable. thank you for any help - Alexa |
Posted: 28-10-2008 - #4
| On my HP D5160 the inner diameter was pre-set to 45 mm. I adjusted the outer diameter to 117 mm and the hole diameter to 24 mm. It covers, like 99.5 percent of the TY printable disks. I had to set the color saturation about 15 percent higher to have good colors also. |
Posted: 28-10-2008 - #5
| Thank you so much - that's a big difference b/c Epson Print CD has it set at inner diameter of 43 so I gain back a lot of space there! I'll certainly test and adjust settings but I appreciate the help. And, thanks for the tip on color saturation - I hear Epson printers sometime lay down too much ink but I'll certainly keep it in mind. Thanks again! p.s. and, to ruler remark, I look to boards to get expertise from people who have done things already - i can measure, convert - but if someone has printed 1,000 TY with Epson Print CD software, it's better to just get settings and save hours of playing around. This was my first post here so I certainly hope there's not that edge to future conversations - it was surprising to me. Last edited by akcorcoran; 28-10-2008 at 23:41. |
Posted: 29-10-2008 - #6
| I believe you have an account on the muvipix forum too. This is the first time I have checked in here in months. I had to use a ruler to get things right. Fortunately, I have an old plastic 12 incher with millimeters on the opposing side. What I did, after getting close at, say 115 and 26 mm, was to print a disk and tweak the adjustments. Those settings were close enough to not waste a disk. Fortunately, I didn't have to tweak for an out-of-round mechanism. As I mentioned before 117 and 24 was pretty darn close - close enough for me. |
Posted: 29-10-2008 - #7
| Yes, you found me!  I go to the experts in the right area when I can.thanks for the add'l info - i suspect I'll be printing a few before I get it right but I'm not doing full-DVD art for this design, so that gives me more flexibility. I wish there was a Print Preview that you could actually print on paper, instead of just pringing on DVDs - I don't have a lot of dead TY DVDs to practice on! I'm such a perfectionist that if I had started myself, I would have inched down about 4 mm each time and wasted hours and a bunch of DVDs, I think this will give me a good leap to start. Thx - Alexa |
Posted: 29-10-2008 - #8
| http://www.taiyo-yuden.com/media/cdr_inkjet.html http://www.taiyo-yuden.com/media/dvdr_inkjet.html OK, I am using TY CD-R watershield hub-printable and my setting is 23.5mm x 117.5mm Canon iP4000 with Acoustica. Note that Acoustica offers a free trial period and it allows for the printing of a ruler for future reference. |
Posted: 29-10-2008 - #9
| Thanks! Appreciate it - I am looking at getting a second batch of the water shield b/c the TY I have now are just inkjet printable. Fine for some projects but not going to stay for the long term. From what I've read, people are really happy with the results. |
Posted: 29-10-2008 - #11
| TY smudge-proof injet, printable - "New from Taiyo Yuden WaterShield blank media for inkjet disc printers! Unlike normal inkjet discs, WaterShield is water resistent, scratch resistant, and features a glossy finish. Taiyo Yuden, the Inventor of CD-Recordable technology, offers media certified for the highest recording speeds. The all-new WaterShield blank media is the best way to ensure your discs stay protected from harsh everyday elements. From Taiyo Yuden, the inventor of the DVD-R, WaterShield discs repel water and protect from wear and scratches." Had some personal contacts here who used them and said they were fantastic for printed DVDs - inkjet print and high quality images but whole different (better) level of durability. http://www.supermediastore.com/taiyo...x-spindle.html Edited to add: Saw this test and also thought - hey, if I can dunk it in water...?! http://www.burnsmart.com/news-tywstest.html And, saw this too - ok, done editing! http://club.cdfreaks.com/f123/verbat...-dvd-r-193620/ Last edited by akcorcoran; 29-10-2008 at 04:31. Reason: Edited to add |
Posted: 29-10-2008 - #12
| Oh, I see. I have used SuperMediaStore before and it seems to be a good outfit. But the price premium seems rather steep, don't you think? OTOH, I suppose it keeps you from having to deal with label damage. FWIW, I bought the recommended clear acrylic spray for this purpose but I have actually never used it! My HP printed labels seem to be quite durable. I've only made about 50 or so and I just replaced my ink cartridges for the first time so I really have no track record here. I'll give you the full spec on the spray if you like. Got mine from WalMart. Edit: I just copied this from one of the reviews on SuperMediaStore: "I was looking for discs that, when printed, look as good as the movie dvds you buy in stores. These are those. I've had great success with them." If that's true they may well be worth the premium. My TYs look a bit 'muddy.' |
Posted: 29-10-2008 - #13
| I'd love to hear how it goes - there was a long post on here I read about the sprays - some good, some bad - lots of figuring out how to spray without sticky, clumping or dulling CD design. But as these are for people paying me for archival memories, I don't feel comfortable with a spray on the surface - no idea how that will work in the long run (not that we'll be playing DVDs in that many years), but still I'm OK with the price increase for the no-smudge and peace of mind. And, for me, it's a bonus that my personal DVD will now all look fab-u-lous! But, Let me know how the spray goes - here's the post I read: http://club.cdfreaks.com/f123/cd-dvd...labels-146242/ |
Posted: 13-12-2008 - #14
| On My Epson R280 using the Epson Print CD software with the Taiyo Watershield DVDs I have been able to print 22mm inner - 117mm outer. That leaves me zero white in the inner hub and no ink spill onto the plastic from what I can see. I see a hint of white left along the outer edge. I tried 118mm, but wound up getting a tiny touch of ink overspill on one side I needed to wipe away. This may have been because my printer centering offsets might not have been dialed in quite right, and will try 118 again next time with my new offsets |
Posted: 13-12-2008 - #15
| after using several different sprays i am now using hair spray, it works great, just place the disc on a piece of copy paper and spray no overspray on the other side, also if you go to www.taperesources.com about half way down on the right hand side you can request a free sample of the TY watershield it is very impressive if you have not seen them yet however they are a little pricey yet |
Posted: 13-12-2008 - #16
| Quote:
__________________ Current drives running here: LG-GSA-H62N, iHBS 112-2, LTR-52246S, iHAP 422 |
Posted: 17-12-2008 - #17
| Been using the Water Shield TY's for about a year now. Great looking and no label to worry about. I use the 118mm / 24mm setting on a R260 Epson printer with a CIS system. The Disc are a little higher but you don't have to buy labels and the outcome is worth it.
__________________ My Signature: I use Taiyo Yuden and Verbatim media mainly. DVDFab : http://club.cdfreaks.com/f116/ http://www.cdfreaks.com/software/Cop...-Platinum.html Removal of new protections may not be available yet in the free version of DVDFab (HD Decrypter) I use ImgBurn as my main burning engine http://www.imgburn.com/index.php?act=download Free Media Player VLC http://www.videolan.org/vlc/ GO TEAM GO Fold for team 13505 http://folding.stanford.edu/ Help us save some lives by joining the Distributed Computing Teams : F@H or WGC or BOTH |
Posted: 17-12-2008 - #18
| Quote:
Quote:
A liittle experimentation may be needed. |
Posted: 18-12-2008 - #19
| A stainless 6" ruler with cork backing & mm scale is ~$4 at WalMart. I'm guessing a few other stores have them at a similar price. |
Posted: 18-12-2008 - #20
| Quote:
 http://www.acoustica.com/cd-label-maker/ |
Posted: 04-04-2009 - #21
| I got a probelm with the Tayo Yuden Printable Glossy CD-R. Maybe somebody got the same problem and can help me. I made a test with two different types of media: 1) Verbatim Printable Glossy NO Water Shield 2) Taiyo Yuden Printable Glossy Water Shield The printing by using the Verbatim was just GREAT! The printing by using the T.Y. was NOT that good: the problem was due to the small metal alignment rollers of the printer which leave some straight lines on the printable surface. I am not talking about missing colors or scratches... it is just that looking at the CD against the light, I can see these "dull" lines (by the printer' rollers) which make the surface not uniform. Of course I repeated the test with another brand of printer... but same result, unfortunately.  I think it might be caused by this "Water Shield" stuff, maybe not peferctly compatible with the printer mechanism.... Any idea, any solution, plase? |
Posted: 04-04-2009 - #22
| Quote:
__________________ Current drives running here: LG-GSA-H62N, iHBS 112-2, LTR-52246S, iHAP 422 |
Posted: 04-04-2009 - #23
| Quote:
 ... and thank you for answering |
Posted: 04-04-2009 - #24
| I just saw, by making a test printing with the up-tray open, those lines are already done BEFORE the printing starts. Those damn rollers mark the surface BEFORE the ink passing, I think becasue of the pressure of the CD - tray against the rollers. What am I supposed to do? Remove 4 of the 6 rollers line?  |
Posted: 04-04-2009 - #25
| I have an HP 5160. It seems the design with rollers will always leave marks on the soft WaterShield surface. I have decided to live with it and have purchased another 100 non-WaterShield. I like HP so by the time this unit dies I hope HP has a newer, better design. |
People who found this also searched for
- epson print cd setting
- taiyo yuden epson print settings
- taiyo yuden tygo3 printing specs
- .taiyo-yuden measures for disc print
- acoustica - aligning printable cds
- acoustica alignment settings
- acoustica cd taiyo yuden
- acoustica epson setting
- acoustica inkjet printable dimensions
- acoustica taiyo yuden
- acoustica taiyo yuden setting
- alignment of cd template
- aquaace
- best cis ink to print taiyo yuden
- best dimention settings for printing on tayio yuden watershield
- best label program for taiyo yuden watershield
- best taiyo yuden epson print settings
- best tayio yuden eposon print settings
- can i use taiyo yuden silver inkjet printable 8x dvd+r with my epson printer
- canon cd printer leaves scratch marks on cd
- canon full cd printing taiyo yuden
- canon ip4000 setting for hub printable taiyo yuden
- canon roller lines taiyo yuden
- cd dimensions printable to the hub
- cis system not white inkjet printable cd
- club ce taiyo yuden
- custom epson cd settings outer diameter
- custom print taiyo yuden cd-r
- diameter of a full face toyo yoden dvd
