Software Problem: Semi-Pro failed in "Full Disk" and "Customize" mode
| DVDFab / DVD Region+CSS Free Discuss, Semi-Pro failed in "Full Disk" and "Customize" mode at Movie copy software forum; Semi-Pro failed backup burn with full disk and with customize. Attached IFO file of DVD and burn log of the customized burn. In customized mode I checked titles 12, 6, 1, 16 & 7. Using 5.0.6.0 Fab Platinum. Using Plextor Drive PX-755SA & Verbatim DVD+R DL. Pathplayer enabled when necessary. |
| Semi-Pro failed backup burn with full disk and with customize. Attached IFO file of DVD and burn log of the customized burn. In customized mode I checked titles 12, 6, 1, 16 & 7. Using 5.0.6.0 Fab Platinum. Using Plextor Drive PX-755SA & Verbatim DVD+R DL. Pathplayer enabled when necessary. |
- Today (MyCE Staff)
- Posts: 15,596
| |
| Consider yourself lucky. One of the worst movies I've ever watched. All kidding aside. I use FixVTS on newer releases, as it seems to clean-up remnants of crap DVDFab sometimes misses. |
| Sorry, I rushed and didn't read your attachments the first time. Try enabling Pathplayer. If that does not work, disable it and try again. |
| Deleted Last edited by LouV68; 21-07-2008 at 19:12. Reason: Accidental double post |
| It also fails the burn backing up as movie only too. Here are some logs 20:52:56: Analyzing of DVD started 20:52:56: Analyzing of DVD completed successfully 20:52:56: Copy process started 21:15:13: Copy process completed successfully 22:59:40: Burn DVD folder (H:\DVD\SEMI_PRO\Temp\MainMovie\SEMI PRO D1\) started 23:10:15: Task_2 failed! Error=122 23:10:16: Process failed! 7/21/2008 11:00:29 PM error WRITE FAILED: Can't find write strategy at sector 32 7/21/2008 10:59:57 PM error Write error at 16 (16) - Code 00 00 00 [No sense information.] 7/21/2008 10:59:44 PM info Lead-in burning time (mS) 35 7/21/2008 10:59:44 PM info Write started 1736352 sectors to write 7/21/2008 10:59:44 PM info Init success: DVD-R packet writing 7/21/2008 10:59:44 PM info Writing speed requested x8.0, effective x8.0 7/21/2008 10:59:44 PM info Available write speed: 8x, 6x, 4x 7/21/2008 10:59:44 PM info Media ID: MCC 02RG20 7/21/2008 10:59:44 PM info Media type: DVD-R 7/21/2008 10:59:44 PM info Ultra DMA mode 4 (ATA66) 7/21/2008 10:59:42 PM info Scanned files #8, folder #2 - total size 3554924544 b. (3.31 Gb.) 7/21/2008 10:59:42 PM info Inserted media type : DVD-R 7/21/2008 10:59:42 PM info Write started 7/21/2008 10:59:40 PM info New media (DVD-R) inserted. Burning layer is ready to write 7/21/2008 8:02:20 PM error WRITE FAILED: Can't find write strategy at sector 266016 7/21/2008 8:02:19 PM error Write error at 266000 (16) - Code 06 28 00 [Unit attention, Not ready to ready change, medium may have changed] 7/21/2008 7:58:05 PM warning Write error recovery success 7/21/2008 7:58:05 PM warning at sector 250992 (16) - recover sequence started 7/21/2008 7:58:05 PM warning Write error - Code 03 0C 07 [Write error, need recovery] - Info 250544 - CSI 0 7/21/2008 7:58:05 PM info Try #0 - duration 21317205 µs 7/21/2008 7:56:35 PM warning Write error recovery success 7/21/2008 7:56:35 PM warning at sector 211024 (16) - recover sequence started 7/21/2008 7:56:35 PM warning Write error - Code 03 0C 07 [Write error, need recovery] - Info 210576 - CSI 0 7/21/2008 7:56:35 PM info Try #0 - duration 21651675 µs 7/21/2008 7:55:38 PM warning Write error recovery success 7/21/2008 7:55:38 PM warning at sector 196960 (16) - recover sequence started 7/21/2008 7:55:38 PM warning Write error - Code 03 0C 07 [Write error, need recovery] - Info 196512 - CSI 0 7/21/2008 7:55:38 PM info Try #0 - duration 21250135 µs 7/21/2008 7:54:39 PM warning Write error recovery success 7/21/2008 7:54:39 PM warning at sector 181824 (16) - recover sequence started 7/21/2008 7:54:39 PM warning Write error - Code 03 0C 07 [Write error, need recovery] - Info 181376 - CSI 0 7/21/2008 7:54:39 PM info Try #0 - duration 20729006 µs 7/21/2008 7:51:41 PM info Lead-in burning time (mS) 0 7/21/2008 7:51:11 PM info Write started 3423504 sectors to write 7/21/2008 7:51:11 PM info Layer change set to LBA 1875936 (3.58 Gb.) 7/21/2008 7:51:11 PM info Writing speed requested x6.0, effective x6.0 7/21/2008 7:51:11 PM info layer break set by filesystem builder at 1875936 7/21/2008 7:51:11 PM info Available write speed: 6x, 4x, 2.4x 7/21/2008 7:51:11 PM info Media ID: MKM-001-00 7/21/2008 7:51:11 PM info Media type: Dual Layer DVD+R 7/21/2008 7:51:11 PM info Ultra DMA mode 4 (ATA66) 7/21/2008 7:51:09 PM info Optimal Layer Break is in cell 7, around 00:10:24 7/21/2008 7:51:08 PM info Scanned files #55, folder #2 - total size 7010119680 b. (6.53 Gb.) 7/21/2008 7:51:08 PM info Inserted media type : DL DVD+R 7/21/2008 7:51:08 PM info Write started 7/21/2008 7:51:05 PM info New media (DL DVD+R) inserted. Burning layer is ready to write 7/21/2008 7:01:54 PM info Compatible media types : DVD-R, DVD-RW Seq., DVD-RW RO, DVD+R, DVD+RW, CD-R, CD-RW, DL DVD+R, DL DVD-R 7/21/2008 7:01:54 PM info Drive has Serial ATA physical interface 7/21/2008 7:01:54 PM info New Drive selected : 4:0:0 - PLEXTOR DVDR PX-755A 1.08 [E] (Ide) 7/21/2008 6:57:31 PM info Current Drive selected : 4:0:0 - PLEXTOR DVDR PX-755A 1.08 [E] (Ide) 7/21/2008 6:57:31 PM info Using Patin-Couffin driver Version 1.37, Internal revision 37 - Async. Access mode 7/21/2008 6:57:31 PM info User default language : 1033 (0x0409h) - English (United States) 7/21/2008 6:57:31 PM info System default language : 1033 (0x0409h) - English (United States) 7/21/2008 6:57:31 PM info DLL Version 5, 0, 6, 5 7/21/2008 6:57:31 PM info DLL C:\Program Files\DVDFab 5\DVDFab.exe 7/21/2008 6:57:31 PM info Version 5, 0, 6, 5 7/21/2008 6:57:31 PM info ExeName : "C:\Program Files\DVDFab 5\DVDFab.exe" 7/21/2008 6:57:31 PM info OS : Professional Service Pack 1 (Build 6001) 7/21/2008 6:57:31 PM info ******************** Report session started ******************** |
| That's odd. My friend used v5.0.4.0 to back up his disc using "custom" mode, and it came out fine. |
| Quote:
Quote:
slow down the write speed to 2.4x you are using Verbs DL but you have an older drive. did you flash to the 1.08 firmware or did the drive come with it? please read the Plextor FAQ http://club.cdfreaks.com/f43/plextor...d-first-49767/ and see this post http://club.cdfreaks.com/1900993-post189.html |
| The plextor has the latest firmware I updated it when it came out. The drive hasn't had any problems burning any other movies. |
| Yes it plays from the hard drive. I even tried using anydvd like some others suggested and that didn't work either. |
| ok i took a closer look at your logs and i was looking at the wrong burn log. so my comments about the DL may not be valid in this particular case. however you still had a burn error, its not a decryption error. try changing the write type from packet writing to SAO http://www.dvdfab.com/docs/index.php/Main/SettingsWrite Quote:
did you read the Plextor FAQ? ok you did flash, good. please do a re-flash. this may help to clear any autowrite strategies which may be causing errors. http://www.plextor.be/technicalservi...=DVD-Recorders |
| I ran AnyDVD in the background and used Fab to decrypt then burn using the vso engine. I slowed the speed down to 2.4 and it made it to 40 something % and then gave me another burn error. I have tried this every way, full disk on a dual layer, customize on a dual layer, movie only on a single layer (Verbatim also) and it always fails the burn. Like I said before I haven't had this problem with any other backups, just semi-pro. Going to try to switch the packet writing next and see how that does. Just tired of making coasters. Also just reflashed the drive too. We'll see? |
| Have to agree you need to switch to SAO writing as packet writing is known to give writing errors
__________________ Jim ( Turtle Brigade Commander )  Windows XP Home Edition Version 2002 SP3 & IE8 Intel Pentium 4 CPU 2.80GHz 2.81 GHz 1.00 GB of RAM ( Old like me ) But does the job great Pioneer 112L FW 8.25 Pioneer 112L FW 8.25 Taiyo Yuden & Verbatim +R.s only in my burners DVD NextCopy Ultimate, DVDFAB Platinum Paid Not To Work  US Navy Retired 20 Years Proudly served on USS Coral Sea CVA-43 / USS Oriskany CVA-34 / USS Ranger CVA-61 |
| Just tried Bridge to Terabithia in Full movie and also got the same burn error? 7/22/2008 11:05:40 PM error WRITE FAILED: Can't find write strategy at sector 585296 7/22/2008 11:05:39 PM error Write error at 585280 (16) - Code 06 28 00 [Unit attention, Not ready to ready change, medium may have changed] 7/22/2008 11:01:56 PM warning Write error recovery success 7/22/2008 11:01:56 PM warning at sector 572864 (16) - recover sequence started 7/22/2008 11:01:56 PM warning Write error - Code 03 0C 07 [Write error, need recovery] - Info 572416 - CSI 0 7/22/2008 11:01:56 PM info Try #0 - duration 16549137 µs 7/22/2008 11:01:19 PM warning Write error recovery success 7/22/2008 11:01:19 PM warning at sector 559312 (16) - recover sequence started 7/22/2008 11:01:19 PM warning Write error - Code 03 0C 07 [Write error, need recovery] - Info 558864 - CSI 0 7/22/2008 11:01:19 PM info Try #0 - duration 16628842 µs 7/22/2008 11:00:36 PM warning Write error recovery success 7/22/2008 11:00:36 PM warning at sector 537728 (16) - recover sequence started 7/22/2008 11:00:36 PM warning Write error - Code 03 0C 07 [Write error, need recovery] - Info 537280 - CSI 0 7/22/2008 11:00:36 PM info Try #0 - duration 16209883 µs 7/22/2008 11:00:02 PM warning Write error recovery success 7/22/2008 11:00:02 PM warning at sector 527232 (16) - recover sequence started 7/22/2008 11:00:02 PM warning Write error - Code 03 0C 07 [Write error, need recovery] - Info 526784 - CSI 0 7/22/2008 11:00:02 PM info Try #0 - duration 16066845 µs 7/22/2008 10:59:10 PM warning Write error recovery success 7/22/2008 10:59:10 PM warning at sector 494480 (16) - recover sequence started 7/22/2008 10:59:10 PM warning Write error - Code 03 0C 07 [Write error, need recovery] - Info 494032 - CSI 0 7/22/2008 10:59:10 PM info Try #0 - duration 16081734 µs 7/22/2008 10:58:26 PM warning Write error recovery success 7/22/2008 10:58:26 PM warning at sector 468608 (16) - recover sequence started 7/22/2008 10:58:26 PM warning Write error - Code 03 0C 07 [Write error, need recovery] - Info 468160 - CSI 0 7/22/2008 10:58:26 PM info Try #0 - duration 15573438 µs 7/22/2008 10:53:07 PM info Lead-in burning time (mS) 0 7/22/2008 10:52:37 PM info Write started 3925424 sectors to write 7/22/2008 10:52:37 PM info Layer change set to LBA 2024048 (3.86 Gb.) 7/22/2008 10:52:37 PM info Writing speed requested x2.4, effective x2.4 7/22/2008 10:52:37 PM info layer break set by filesystem builder at 2024048 7/22/2008 10:52:37 PM info Available write speed: 6x, 4x, 2.4x 7/22/2008 10:52:37 PM info Media ID: MKM-001-00 7/22/2008 10:52:37 PM info Media type: Dual Layer DVD+R 7/22/2008 10:52:37 PM info Ultra DMA mode 4 (ATA66) 7/22/2008 10:52:35 PM info Optimal Layer Break is in cell 14, around 00:57:27 7/22/2008 10:52:35 PM info Scanned files #43, folder #2 - total size 8038057984 b. (7.49 Gb.) 7/22/2008 10:52:35 PM info Inserted media type : DL DVD+R 7/22/2008 10:52:35 PM info Write started 7/22/2008 10:51:49 PM info New media (DL DVD+R) inserted. Burning layer is ready to write 7/22/2008 10:47:43 PM error WRITE FAILED: write error occured at 232.5% of the write 7/22/2008 10:47:42 PM error Write error at 1688384 (16) - Code 04 09 02 [HW error, Focus servo failure] 7/22/2008 10:46:56 PM warning Write error recovery success 7/22/2008 10:46:56 PM warning at sector 1684656 (16) - recover sequence started 7/22/2008 10:46:56 PM warning Write error - Code 03 0C 07 [Write error, need recovery] - Info 1684208 - CSI 0 7/22/2008 10:46:56 PM info Try #0 - duration 24170598 µs 7/22/2008 10:45:45 PM warning Write error recovery success 7/22/2008 10:45:45 PM warning at sector 1672672 (16) - recover sequence started 7/22/2008 10:45:45 PM warning Write error - Code 03 0C 07 [Write error, need recovery] - Info 1672224 - CSI 0 7/22/2008 10:45:45 PM info Try #0 - duration 22461468 µs 7/22/2008 10:44:37 PM warning Write error recovery success 7/22/2008 10:44:37 PM warning at sector 1659152 (16) - recover sequence started 7/22/2008 10:44:37 PM warning Write error - Code 03 0C 07 [Write error, need recovery] - Info 1658704 - CSI 0 7/22/2008 10:44:37 PM info Try #0 - duration 24438347 µs 7/22/2008 10:43:42 PM warning Write error recovery success 7/22/2008 10:43:42 PM warning at sector 1646720 (16) - recover sequence started 7/22/2008 10:43:42 PM warning Write error - Code 03 0C 07 [Write error, need recovery] - Info 1646272 - CSI 0 7/22/2008 10:43:42 PM info Try #0 - duration 24550196 µs 7/22/2008 10:42:41 PM warning Write error recovery success 7/22/2008 10:42:41 PM warning at sector 1633504 (16) - recover sequence started 7/22/2008 10:42:41 PM warning Write error - Code 03 0C 07 [Write error, need recovery] - Info 1633056 - CSI 0 7/22/2008 10:42:41 PM info Try #0 - duration 24046852 µs 7/22/2008 10:41:33 PM warning Write error recovery success 7/22/2008 10:41:33 PM warning at sector 1619360 (16) - recover sequence started 7/22/2008 10:41:33 PM warning Write error - Code 03 0C 07 [Write error, need recovery] - Info 1618912 - CSI 0 7/22/2008 10:41:33 PM info Try #0 - duration 24098440 µs 7/22/2008 10:40:29 PM warning Write error recovery success 7/22/2008 10:40:29 PM warning at sector 1605136 (16) - recover sequence started 7/22/2008 10:40:29 PM warning Write error - Code 03 0C 07 [Write error, need recovery] - Info 1604688 - CSI 0 7/22/2008 10:40:29 PM info Try #0 - duration 25647918 µs 7/22/2008 10:39:22 PM warning Write error recovery success 7/22/2008 10:39:22 PM warning at sector 1585488 (16) - recover sequence started 7/22/2008 10:39:22 PM warning Write error - Code 03 0C 07 [Write error, need recovery] - Info 1585040 - CSI 0 7/22/2008 10:39:22 PM info Try #0 - duration 25962999 µs 7/22/2008 10:21:41 PM info Lead-in burning time (mS) 0 7/22/2008 10:21:11 PM info Write started 3925424 sectors to write 7/22/2008 10:21:11 PM info Layer change set to LBA 2024048 (3.86 Gb.) 7/22/2008 10:21:11 PM info Writing speed requested x2.4, effective x2.4 7/22/2008 10:21:11 PM info layer break set by filesystem builder at 2024048 7/22/2008 10:21:11 PM info Available write speed: 6x, 4x, 2.4x 7/22/2008 10:21:11 PM info Media ID: MKM-001-00 7/22/2008 10:21:11 PM info Media type: Dual Layer DVD+R 7/22/2008 10:21:11 PM info Ultra DMA mode 4 (ATA66) 7/22/2008 10:21:09 PM info Optimal Layer Break is in cell 15, around 00:57:27 7/22/2008 10:21:09 PM info Scanned files #43, folder #2 - total size 8038057984 b. (7.49 Gb.) 7/22/2008 10:21:09 PM info Inserted media type : DL DVD+R 7/22/2008 10:21:09 PM info Write started 7/22/2008 10:21:07 PM info New media (DL DVD+R) inserted. Burning layer is ready to write 7/22/2008 9:21:19 PM info Compatible media types : DVD-R, DVD-RW Seq., DVD-RW RO, DVD+R, DVD+RW, CD-R, CD-RW, DL DVD+R, DL DVD-R 7/22/2008 9:21:19 PM info Drive has Serial ATA physical interface 7/22/2008 9:21:19 PM info New Drive selected : 4:0:0 - PLEXTOR DVDR PX-755A 1.08 [E] (Ide) 7/22/2008 9:20:35 PM info Current Drive selected : 4:0:0 - PLEXTOR DVDR PX-755A 1.08 [E] (Ide) 7/22/2008 9:20:35 PM info Using Patin-Couffin driver Version 1.37, Internal revision 37 - Async. Access mode 7/22/2008 9:20:35 PM info User default language : 1033 (0x0409h) - English (United States) 7/22/2008 9:20:35 PM info System default language : 1033 (0x0409h) - English (United States) 7/22/2008 9:20:35 PM info DLL Version 5, 0, 6, 5 7/22/2008 9:20:35 PM info DLL C:\Program Files\DVDFab 5\DVDFab.exe 7/22/2008 9:20:35 PM info Version 5, 0, 6, 5 7/22/2008 9:20:35 PM info ExeName : "C:\Program Files\DVDFab 5\DVDFab.exe" 7/22/2008 9:20:35 PM info OS : Professional Service Pack 1 (Build 6001) 7/22/2008 9:20:35 PM info ******************** Report session started ******************* |
| with your dl layer disc the SAO or Packet writing will not make a difference only with the dvd-r. please reflash the drive shutdown and physically disconnect and check all connections. have you recently updated any drivers? what drivers are you using for your sata connection? how do you have it set in bios? when was the last time you cleaned the inside of the drive? |
There's more to MyCE.com
Listen up, we've got more. Product information on 102,541 products. Our experts have written 521 articles. We've gathered 16,068 news items for you to always keep updated.
