Problem Backing Up The Dark Knight
| DVDFab / DVD Region+CSS Free Discuss, Problem Backing Up The Dark Knight at Movie copy software forum; Used the new DVD Fab beta (5.1.1.8) as well as the latest release version I had to no avail to back up Disk 1 of the 2 disk set (2nd disk backed up fine). DVD Fab stopped scanning then I received an XP error message that there was insufficient memory |
| Used the new DVD Fab beta (5.1.1.8) as well as the latest release version I had to no avail to back up Disk 1 of the 2 disk set (2nd disk backed up fine). DVD Fab stopped scanning then I received an XP error message that there was insufficient memory and making more mem available (45 gb free on hard drive). PC then froze. Shut down, started again. DVD Fab scanned and scanned, then just closed without any error message. Did this several times. Although the DVD is brand new (purchased off shelf), cleaned it and tried again with same result. Since Dark Knight is Warner Bros, tried with Rip It which also had a problem reading the DVD, then gave the error message "VTS 5 is malformed and couldn't be loaded properly. It will be excluded from the rip. After I ok'd the messages, received another one "Couldn't load VTS_05_0.IFO". After I ok'd that message, I started getting the same for VTS 6 so I aborted the rip. I would appreciate any thoughts on this. Thanks.  |
- Today (MyCE Staff)
- Posts: 15,596
| |
| Hi Miami, I take it this is an R1 disc set since your user name is Miami...  another tough one for this old fart.Anyway, since this flick isn't due to be released yet, I doubt there's much feedback yet. I'd send the .IFO files to Fengtao and see what the "F" man has to say.
__________________ If it ain't broke, don't fix it! You know how to whistle, don't you, Steve? You just put your lips together and... blow. | Lauren Bacall | "To Have and Have Not" (1944). |
| What I don't get is how you got a release when it hasn't come out yet?? Even Amazon doesn't have it?? Here what Amazon says. Available for Pre-order. This item will be released on Dec 9, 2008. |
| Quote:
Anyway, you can open the disc with windows explorer and email them to Fengtao like so: http://club.cdfreaks.com/f116/how-se...8/#post1887290 just skip #1 since Fab won't open the disc Hope this helps
__________________ If it ain't broke, don't fix it! You know how to whistle, don't you, Steve? You just put your lips together and... blow. | Lauren Bacall | "To Have and Have Not" (1944). |
| what are your pathplayer settings? http://www.dvdfab.com/docs/index.php...ingsPathPlayer |
| Quote:
It shouldn't be a surprise to anyone and nothing illegal should be inferred nor implied.
__________________ If it ain't broke, don't fix it! You know how to whistle, don't you, Steve? You just put your lips together and... blow. | Lauren Bacall | "To Have and Have Not" (1944). |
| Some mom and pop video stores put stuff out early to stay ahead of Blockbuster, DVD kiosks, Walmart, etc. to stay in business. Anyway, my friend called me a little while ago - he purchased the single disk edition and tried to back it up before watching -- same thing. Scans for five minutes, gets memory full XP message (he has plenty of HD space) and his pc slowed down and then locked up. He shut down and turned the pc back on and tried it again -- DVDFAB scanned for five minutes then closed by itself. I'll try the using explorer to get the IFO's and send them on. Since I only use DVDFAB, Pathplayer is grayed out. Last edited by Miami; 26-11-2008 at 04:06. Reason: correct spelling |
| I am having the exact same problem with Dark Knight. Insufficiant memory in a computer using Windows XP and it continuously runs until "program has stopped working" error comes up on Vista. Neither machine was able to complete the initial opening source scan, so I am also unable to send the iso in Other ripping programs were also unable to complete the scan as well side note: Wanted and Chronicals of Narnia: Prince Caspian both opened and copied with no errors, although if using only DVDDecrypter, Chronicals of Narnia will appear to be 74gb of information |
| Just finished sending a zip file of the IFO's to Fengtao so we'll see what's shaking. This is the third attempt to backup (myself, my friend and now you) so I know it's not me or my pc. Thanks to ALL for your comments and suggestions. By the way, "Stepbrothers" backed up fine. |
| With AnyDVD (6.4.6.6) Summary for drive E: (AnyDVD 6.4.6.6) TSSTCORP CDDVDW SH-S223F SB00 0602 Drive (Hardware) Region: 0 (not set!) Media is a DVD. Booktype: dvd-rom (version 1), Layers: 2 (opposite) Size of first Layer: 1985200 sectors (3877 MBytes) Total size: 3967984 sectors (7749 MBytes) Video DVD (or CD) label: THE_DARK_NIGHT Media is CSS protected! Video Standard: NTSC Media is locked to region(s): 1 4! Found & removed RCE protection! Structural copy protection not found. Changed firstplay: Jump directly to TitleMenu! Autorun not found on Video DVD. Bad sector protection not found. Emulating RPC-2 drive with region 1! With Nero with any AnyDVD I get about 11% and it keeps scaning and never make's it past 11%. With CloneDVD2 with AnyDVD I get about 30% before it say's error. |
| I backed up DARK KNIGHT in Main Movie Mode just fine (DVD9) with the new BETA (Single Layer). Full disc seems to be the only problem backing up in DVD9. If you don't mind the reduction in resolution to 78%, try it again on DVD5 in Main Movie Only mode....OR.... Go back down to the 5.1.2.2. version and try backing it up again. BETA IS BETA and you have to be patient. Here is a copy of my log file from my successful copy: Hope this helps: Info for drive [D:\] (DVDFab Platinum 5.2.0.8) Drive region: 1 Disc type: Video DVD Disc region: 1, 4 Volume name: THE_DARK_NIGHT Video standard: NTSC Layer 0 size: 1985200 sectors (3877 MBytes) Layer 1 size: 1985200 sectors (3877 MBytes) CSS (Content Scramble System) protection is removed! RC (Region Code) protection is removed! RCE (Region Code Enhancement) protection is removed! APS (Analog Protection System) protection is removed! UOPs (User Operation Prohobitions) protection is removed! Invalid PTTs protection is not found. Invalid PGCIs protection is not found. Invalid PGCs protection is not found. Invalid TMAPs protection is not found. Invalid CELLs protection is removed! Invalid VOBUs protection is not found. Fake vts protection is not found! Potential bad sector (vts:1 title begin:0 end:1343) is removed! Potential bad sector (vts:1 title begin:1360 end:13765) is removed! 2 potential bad sector protections are removed! Structure protection (ARccOS, RipGuard, etc.) is removed! PathPlayer is enabled! Unplayable cell (vts:1 title pgc:1 cell:2) is removed! Unplayable cell (vts:1 title pgc:1 cell:3) is removed! Unplayable cell (vts:1 title pgc:1 cell:4) is removed! Unplayable cell (vts:1 title pgc:1 cell:5) is removed! Unplayable cell (vts:1 title pgc:1 cell:6) is removed! Unplayable cell (vts:1 title pgc:1 cell:7) is removed! Unplayable cell (vts:1 title pgc:1 cell:8) is removed! Unplayable cell (vts:1 title pgc:5 cell:1) is removed! Unplayable cell (vts:1 title pgc:5 cell:2) is removed! Unplayable cell (vts:3 title pgc:2 cell:1) is removed! Unplayable cell (vts:4 title pgc:1 cell:1) is removed! 11 unplayable cells are removed! Last edited by rack85; 10-12-2008 at 02:43. |
| Gez Rack how many times are you going to post this ?
__________________ Jim ( Turtle Brigade Commander )  Windows XP Home Edition Version 2002 SP3 & IE8 Intel Pentium 4 CPU 2.80GHz 2.81 GHz 1.00 GB of RAM ( Old like me ) But does the job great Pioneer 112L FW 8.25 Pioneer 112L FW 8.25 Taiyo Yuden & Verbatim +R.s only in my burners DVD NextCopy Ultimate, DVDFAB Platinum Paid Not To Work  US Navy Retired 20 Years Proudly served on USS Coral Sea CVA-43 / USS Oriskany CVA-34 / USS Ranger CVA-61 |
| I've always used Nero until I discovered ImageBurn! Never had a coaster until Hancock and The Dark Knight. At first I thought it was my burners. Until tonight when I made two coasters with The Dark Night. ImageBurn started acting wierd. It wouldn't burn the disc. So, I switched to Nero and no problems. Everything burned right. I have no idea what is going on. I did update to 08 tonight! Any thoughts? |
| a burn log would help
__________________ Jim ( Turtle Brigade Commander ) Windows XP Home Edition Version 2002 SP3 & IE8 Intel Pentium 4 CPU 2.80GHz 2.81 GHz 1.00 GB of RAM ( Old like me ) But does the job great Pioneer 112L FW 8.25 Pioneer 112L FW 8.25 Taiyo Yuden & Verbatim +R.s only in my burners DVD NextCopy Ultimate, DVDFAB Platinum Paid Not To Work US Navy Retired 20 Years Proudly served on USS Coral Sea CVA-43 / USS Oriskany CVA-34 / USS Ranger CVA-61 |
| MIAMI I bought a copy yesterday. I backed it up using dvdfab5.2.0.5 The way I did it was to disable the pathplayer. It ran a little slower but,completed the copy full disc. ZAP |
| Quote:
5.2.0.8 Beta CLONE mode using VSO engine with Verbatim MKM-001 DL media burned at almost 8x flawless 2008-12-10 10:59:48 Info WRITE SUCCESS: Disc written 2008-12-10 10:59:48 Info Finalization Time 00:01:01 - Total completion time 00:15:39 2008-12-10 10:58:46 Info Write finished in 00:14:38 - Finalization start here. Avg. burn rate 7.34 2008-12-10 10:44:08 Info Lead-in burning time (mS) 0 2008-12-10 10:44:08 Info Write started 3967984 sectors to write 2008-12-10 10:44:08 Info Init success: DVD+R Dual Layer 2008-12-10 10:44:08 Info Init DVD+R Dual Layer: Layer change set to LBA 1985200 (3.79 Gb.) 2008-12-10 10:43:42 Info Writing speed requested x8.0, effective x8.0 2008-12-10 10:43:42 Info Layer break set by user at sector 1985200 2008-12-10 10:43:42 Info Available write speed: 10x, 8x, 6x, 4x, 2.4x, 2008-12-10 10:43:42 Info Media ID: MKM-001-00 2008-12-10 10:43:42 Info Media type: Dual Layer DVD+R 2008-12-10 10:43:39 Info Write started 2008-12-10 10:43:35 Info New media (DL DVD+R) inserted. Burning layer is ready to write 2008-12-10 10:43:33 Info Compatible media types : DVD-R, DVD-RW Seq., DVD-RW RO, DVDRAM, DVD+R, DVD+RW, CD-R, CD-RW, DL DVD+R, DL DVD-R 2008-12-10 10:43:33 Info Drive has IDE-ATAPI physical interface 2008-12-10 10:43:33 Info New Drive selected : 0:0:0 - PIONEER DVD-RW DVR-112L 8.25 [F] (Usb) 2008-12-10 10:41:46 Info Current Drive selected : 0:0:0 - TSSTcorp DVD+-RW TS-L632D DE04 [E] (Ide) 2008-12-10 10:41:46 Info Using Patin-Couffin driver Version 1.37, Internal revision 37 Async. Access mode 2008-12-10 10:41:46 Info System default language : English (United States) 2008-12-10 10:41:46 Info User default language : English (United States) 2008-12-10 10:41:46 Info DLL Version : 3.2.2.402 2008-12-10 10:41:46 Info DLL : C:\Program Files\DVDFab 5\vso_hwe.dll 2008-12-10 10:41:46 Info Version : 5, 2, 0, 8 2008-12-10 10:41:46 Info ExeName : C:\Program Files\DVDFab 5\DVDFab.exe 2008-12-10 10:41:46 Info OS : Microsoft Vista Home edition (build 6001) with Service Pack 1 6.0 |
There's more to MyCE.com
Listen up, we've got more. Product information on 102,541 products. Our experts have written 521 articles. We've gathered 16,068 news items for you to always keep updated.
Active Commenters
Posting Rules
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
People who found this also searched for
- backing up dark knight
- backing up the dark knight
- backup dvd with malformed vts files
- batman thedark knight blu-ray backup to harddisk can not run
- can the dark knight be backed up
- dark uss 1 ro
- dvd rip prince caspian 74gb
- knight s club code in c language
- malformed ifo
- malformed vts
- mediaportal problem dark night
- pgc.net the dark knight
- problems backing up batman the dark knight
- protection dvd dark knight ripper
- vts 05 0 dvd decrypter the dark knight
- vts 05 0.ifo malformed
- vts 5 is malformed and couldn't be loaded properly. it will be excluded from the rip.
- vts is malformed
- vts is malformed and couldnt be loaded properly
- vts malformed
