Software Problem: DvdFab not working with Vista
| DVDFab / DVD Region+CSS Free Discuss, DvdFab not working with Vista at Movie copy software forum; Well I just got a new laptop that has Windows Vista Home Premium 64-bit. Well I have the latest version of DVDFAB that works perfectly fine on my desktop, but every time it starts the burn process Vista stops it. Dvdfab gets as far as copying the files into the |
| Well I just got a new laptop that has Windows Vista Home Premium 64-bit. Well I have the latest version of DVDFAB that works perfectly fine on my desktop, but every time it starts the burn process Vista stops it. Dvdfab gets as far as copying the files into the temp folder, but when it comes to burning those files on the blank dvd Vista shuts it down. Now I have read a few posts and yes I have tried to add it to the DEP list. And yes the box is checked. However, I still get the same problem...does anybody know of anything I can try? I did already try and re-install, but nothing different happens. |
- Today (MyCE Staff)
- Posts: 15,596
| |
| We have a dedicated DVDFab forum kraigballa, so I'm going to move your thread there. You should get more informed replies there.
__________________ How to check/enable DMA by Womble How to Delete Your Upper and Lower Filters Please don't send private messages to me with technical questions. All technical questions should go in the forums. |
| I have even tried to roll back to an earlier version, but still I get the same result |
| Anyone have any ideas on what I can try to do? |
| Quote:
__________________ ----------Signature---------- Settings: DVDFab with ImgBurn ________________________ |
| I see what you are talking about, however, it is dimmed out so I cannot check the box. |
| Quote:
 can you right click on the DVDFab icon and select "Run this program as an administrator" ?
__________________ ----------Signature---------- Settings: DVDFab with ImgBurn ________________________ |
| Yeah I can right click on the icon and there is an option that says Run as Administrator. However, I have tried that option. |
| The program runs well, and rediculously fast, and goes all the way to where it actually says the disc was created successfully and then a windows errors message comes up saying it was stopped. It has a bubble in the taskbar that says DEP shut it down and to click for more options. First I tried adding it as an exception in the DEP options but that did nothing. Then I looked up how to disable DEP and found the command line code "bcdedit.exe/set {current} nx AlwaysOff" which seems to work and the DEP menu is grayed out. But when I try to use DVDfab the same thing happens. How can it tell me DEP shut down the program if I disabled it? I've tried the typical update windows, run as administrator, turn off UAC, and run in xp compatibility and nothing works. Any ideas? Ugh, vista is so annoying. I even tried installing a new version...shoot I installed on another drive too. I even tried to not install the ISO engine. I even went to this site and tried everything on it "http://wiki.answers.com/Q/Why_does_data_execution_prevention_block_windows_live_messenger" Something is wrong...and I am sure someone has found the solution..any help would be much appreciated |
| Quote:
__________________ ----------Signature---------- Settings: DVDFab with ImgBurn ________________________ |
| @ StormJumper;Just thought I would let you know you can disable DEP in Vista Home Premium or at least it worked for me.As we have discussed before I have tweaked mt VHP in other ways so that could be why it worked. @kraigballa;My VHP is 32 bit so that could make a difference .This is the correct method & command: Use your Start/Programs/Acessories/Command Prompt right click on it & select Run as administrator. From administrator command prompt: I cd\ mine to C:\> bcdedit /set nx AlwaysOff Just copy & paste the above command line. I looked at the command line you used : bcdedit.exe/set {current} nx AlwaysOff I guess the {current} might be for current user.If you have more than one user on your laptop that might be necessary.If the disable works with it. Also in the command I use there is a space between bcdedit & /set & no .exe This is an image of what the DEP should now look like. |
| Yes your command that you used is a little bit different, but my DEP is shaded out just like how your image displays. Just for shits and giggles I tried it with your command and it still does the same thing. I am on 64 bit so maybe DvdFab just can't run on Windows Vista Home Premium 64-bit...clean boot and safe mode also do not work. |
| I would like to add something to this also --- I have Vista Home Basic on a new computer & DVDFab worked fine until I downloaded the last update (6.0.2.2) now it just pops upm a box that saysm it has a problem and stopped working. I can't get it to do anything now! Does anyone else have this problem or can you tell me what it's doing? Thanks ArkyHummer |
| Yeah heard of that problem while I was trying to find an answer to mine. For now just roll back to your previous version. I re-installed an older version but I still get the same error even though DEP is disabled. |
| Then I would say DEP should be off.I don't know why your still getting the error. I guess you could try renabling DEP with this command: bcdedit /set nx AlwaysOn Then follow StormJumper's instructions in post #10. After re-enabling DEP you might leave it on & try this command: bcdedit /set nx optout |
| Ya guys nothing is working...I just tried what cholla said, and still I get the error. |
| I just talked to HP and they are telling me that the issue is DVDFAB. He is telling me that the software is not compatible with my version of Windows Vista, which is Windows Vista Home Premium 64-bit. Any ideas...? |
| Quote:
If you want to set ImgBurn as the burn engine in DVDFab go into common settings->"Write" select ImgBurn in the dropdown window, also set the write speed to "Recommend" you will need ImgBurn installed and do the following... Open ImgBurn and click on "Tools" located on the menu bar and select "Settings" click on the "Build" tab and on Page #1 make sure there is a check mark in the box next to "Check 'Close Program' " Page #2 make sure there is a check mark in the following boxes.. 1)..Don't Prompt Image Details 2)..Don't Prompt VIDEO_TS Content 3)..Don't Prompt Volume Label any other boxes can stay as they are. Good luck. |
| Sweet thanks! That does work...at least until DVDFab fixes their burn engine to work with 64-bit. |
| There are several issues with Vista. Even Microsoft field engineers will tell you don't use it; use Windows 7 if you can get it, so that probably tells you something. Internally, power users don't even like it. But with Vista and DVDFAB 6.whatever, there are issues, DEP not one of them. If DEP was the cause, it would most likely not allow DVDFAB to run at all. There are issues with the DVDFAB 6 release. The issues I come across are sound sync issues with Video using DVD to Mobile and File to Mobile (IPOD being the mobile device) and it is sporadic, so this tells me DVDFab. I have opened a tech support "EMAIL" with these guys, but we will see if their support is worth a darn. |
| Quote:
__________________ I do not provide technical support over E-mail or Private Message Please post your questions on the Forum Sign up to CD Freaks Register Here FORUM RULES Need some help ? Please use our search function first Join us on the CDFreaks Folding@Home Team! Read more here Get WinDWFlash HERE My Computer specs are HERE |
| Quote:
I would appreciate any help I can get. Also, I installed the DVD43, but I can't tell that it does anything! |
| Not to hijack the thread, but... Having a similar issue with Vista Ultimate. The program starts to read the disk and then Windows shuts it down, Happens with 6022 and 6030. Imgburn or vso. Doesn't make any difference. Can't copy and paste the error message here. Any help appreciated. Dick |
| Quote:
__________________ ----------Signature---------- Settings: DVDFab with ImgBurn ________________________ |
There's more to MyCE.com
Listen up, we've got more. Product information on 102,541 products. Our experts have written 521 articles. We've gathered 16,068 news items for you to always keep updated.
Active Commenters
Posting Rules
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
People who found this also searched for
- dvd fab imagine that movie
- dvdfab 6.2.0.0 beta
- (dvdfab 6.2.0.0)
- baixar dvdfab 6.2.0.0
- bcdedit.exe set nx is not working in vista 64 bit
- can't copy imagine that dvdfab
- copy software not working on vista
- data execution prevention is shaded out
- dep set for dvdfab
- disappear dvdfab
- does dvdfab run on vista
- does dvdfab work on mac
- does label on dvd stop from dvdfab
- dvd fab 6.0.2.2 does not run under windows virtual machine
- dvd fab 6.2.0.0
- dvd fab 6.2.0.0 beta
- dvd fab runs under vmware fusion but not under windows virtual pc
- dvd shrink does not work with vmware fusion windows
- dvdfab 6 iso daemon tools not working
- dvdfab 6 loading point support not loaded
- dvdfab 6 not compatible in windows 7
- dvdfab 6 not working on vista
- dvdfab 6 wont burn vanilla?
- dvdfab 6.2.0.0
- dvdfab 6.2.0.0 beta
- dvdfab a debugger has been found running in your system
- dvdfab debugger
- dvdfab for mac os x
- dvdfab how to copy imagine that
- dvdfab imagine that
- dvdfab imagine that problems
- dvdfab loading point
- dvdfab neu 6.2.0.0
- dvdfab not starting
- dvdfab not working
- dvdfab not working with vista
- dvdfab not working with windows 7 64 bit
- dvdfab runs but does nothing
- dvdfab stops working on vista
- dvdfab stops working vista 64
- dvdfab under virtual machine
- dvdfab windows vista
- dvdfab won't run in vista
- dvdfab wont start debugger
- dvdfab work virtual pc
- how to get dvdfab to work on vista home basic
- how to start debug program in windows 7 home premium 64 bit
- imagine that error copying dvdfab
- is dvd fab coompatible with windows vista
- is dvdfab mac compatible
- is it safe to install dvdfab 6020
- pcouffin device for 64 bits systems intel
- pcouffin device for amd 64 bits systems on intel
- pcouffin device for amd64 vso software
- problem backing up imagine that movie with dvdfab 6
- run fab dvd on vista
- use dvdfab 6 with vista home basic
- using dvd fab keeps saying closing program
- using dvdfab on a virtual machine
- why do i keep getting dvdfab 6 quit working
- why dvd fab not work with vista
