DVDFab - A love/hate relationship!

dvdfab
DVDFab / DVD Region+CSS Free Discuss, DVDFab - A love/hate relationship! at Movie copy software forum; First & formost, let me start by saying how impressed and user-friendly i found DVDFab to be. After downloading the program and using the trial version for the first thirty days, i paid for the key without hesitation, and have enjoyed the last few months of copying DVD’s without problems.

Old Posted: 15-02-2008
default_avatar
Bldhnd71 (New on Forum)
Posts: 4
  • Find More Posts by Bldhnd71
First & formost, let me start by saying how impressed and user-friendly i found DVDFab to be. After downloading the program and using the trial version for the first thirty days, i paid for the key without hesitation, and have enjoyed the last few months of copying DVD’s without problems.

About two weeks ago, i came upon a wierd problem.

Out of the blue, during the writing exercise, it came up error 116. OK, might be a dud disc. Never had one before, but been told it does happen. Input another disc, between 10-15% of writing the disc, same thing happens.

Hmm...Could require updated program i convinced myself. Downloaded 4.0.5.0 version, and install it. Same thing happens.

OK..Possible corrupted program. Complete uninstall. After uninstalling program, downloaded later version (4.0.5.5), and installed.

Same again.....Further investigation required.

Re-read tutorial and then forum, gaining some very helpful hints along the way, including the “how to uninstall properly”, and cleaning the registry. I then uninstalled the program, and deleted anything to do with DVDFab from the computer, then cleaned the registry. After installing the latest version again (4.0.6.0), i tried it again.

Same thing.....

For the whole time of using DVDFab we have been using LG branded 1-16x 4.7GB printable DVD-R’s, costing about AUD$0.30 per disc. These have worked very well in the past, and i have over a fiftey copies to prove it. Reaching for anything now, i went out and purchased some more expensive DVD-R’s being MagMedia 1-16x 4.7GB priced at AUD$1.00 each.

In they went, and away they went, writing to the end of its course.

HOORAY!!...said I. .....Unitill i tried to play it on three separate branded DVD players, each one stating that it had a “bad disc”. This was done a few times using separate movies to copy, and always came out the same.

Now cannot recall for sure, but am reasonably certain no other new programs were installed at the time, and the copying format works like a treat.

Am now at my wits end, and would appreciate any recommendations from someone else who is more computer literate than I.....Please find following copy of the log.

10/02/2008 5:56:15 PM info ******************** Report session closed *********************
10/02/2008 5:03:14 PM info Compatible media types : DVD-R, DVD-RW Seq., DVD-RW RO, DVDRAM, DVD+R, DVD+RW, CD-R, CD-RW, DL DVD+R, DL DVD-R
10/02/2008 5:03:14 PM info New Drive selected : 1:1:0 - PHILIPS DVD-RAM SDVD8821 EX04 [E] (Ide)
10/02/2008 5:01:39 PM info Current Drive selected : 1:1:0 - PHILIPS DVD-RAM SDVD8821 EX04 [E] (Ide)
10/02/2008 5:01:39 PM info Using Patin-Couffin driver Version 1.37, Internal revision 37 - Async. Access mode
10/02/2008 5:01:39 PM info User default language : 3081 (0x0C09h) - English (Australian)
10/02/2008 5:01:39 PM info System default language : 3081 (0x0C09h) - English (Australian)
10/02/2008 5:01:39 PM info DLL Version 2.1.7.338
10/02/2008 5:01:39 PM info DLL C:\Program Files\DVDFab Platinum 4\vso_hwe.dll
10/02/2008 5:01:39 PM info Version 4, 0, 6, 2
10/02/2008 5:01:39 PM info ExeName : "C:\Program Files\DVDFab Platinum 4\DVDFabPlatinum.exe"
10/02/2008 5:01:39 PM info OS : Professional (Build 6000)
10/02/2008 5:01:39 PM info ******************** Report session started ********************


10/02/2008 5:03:14 PM info Compatible media types : DVD-R, DVD-RW Seq., DVD-RW RO, DVDRAM, DVD+R, DVD+RW, CD-R, CD-RW, DL DVD+R, DL DVD-R
10/02/2008 5:03:14 PM info New Drive selected : 1:1:0 - PHILIPS DVD-RAM SDVD8821 EX04 [E] (Ide)
10/02/2008 5:01:39 PM info Current Drive selected : 1:1:0 - PHILIPS DVD-RAM SDVD8821 EX04 [E] (Ide)
10/02/2008 5:01:39 PM info Using Patin-Couffin driver Version 1.37, Internal revision 37 - Async. Access mode
10/02/2008 5:01:39 PM info User default language : 3081 (0x0C09h) - English (Australian)
10/02/2008 5:01:39 PM info System default language : 3081 (0x0C09h) - English (Australian)
10/02/2008 5:01:39 PM info DLL Version 2.1.7.338
10/02/2008 5:01:39 PM info DLL C:\Program Files\DVDFab Platinum 4\vso_hwe.dll
10/02/2008 5:01:39 PM info Version 4, 0, 6, 2
10/02/2008 5:01:39 PM info ExeName : "C:\Program Files\DVDFab Platinum 4\DVDFabPlatinum.exe"
10/02/2008 5:01:39 PM info OS : Professional (Build 6000)
10/02/2008 5:01:39 PM info ******************** Report session started ********************


10/02/2008 10:50:46 AM info ******************** Report session closed *********************
10/02/2008 10:40:48 AM info Finalization Time 00:01:29 - Total completion time 00:29:37
10/02/2008 10:40:48 AM info WRITE SUCCESS
10/02/2008 10:39:18 AM info Write finished in 00:28:07 - Finalization start here. Avg. burn rate 2.12
10/02/2008 10:11:18 AM info Lead-in burning time (mS) 7308
10/02/2008 10:11:11 AM info Write started 2202432 sectors to write
10/02/2008 10:11:11 AM info Init success: DVD-R packet writing
10/02/2008 10:11:11 AM info Writing speed requested x4.0, effective x4.0
10/02/2008 10:11:10 AM info Available write speed: 4x, 2x
10/02/2008 10:11:10 AM info Media ID: MJC M005
10/02/2008 10:11:10 AM info Media type: DVD-R
10/02/2008 10:11:10 AM info Ultra DMA mode 2 (ATA33)
10/02/2008 10:11:08 AM info Scanned files #44, folder #2 - total size 4509407232 b. (4.2 Gb.)
10/02/2008 10:11:08 AM info Inserted media type : DVD-R
10/02/2008 10:11:08 AM info Write started
10/02/2008 10:10:59 AM info New media inserted. Burning layer is ready to write
10/02/2008 10:09:01 AM error Write error at 229888 (16) - Code 05 21 02 [Illegal request, Invalid address for Write]
10/02/2008 10:09:01 AM warning Reporting invalid address for write during recovery - trying to continue
10/02/2008 10:09:01 AM warning at sector 229872 (16) - recover sequence started
10/02/2008 10:09:01 AM warning Write error - Code 03 0C 00 [Write error] - Info 0 - CSI 0
10/02/2008 10:09:01 AM info Try #0 - duration 50197685 µs
10/02/2008 10:05:13 AM info Lead-in burning time (mS) 12960
10/02/2008 10:05:00 AM info Write started 2202432 sectors to write
10/02/2008 10:05:00 AM info Init success: DVD-R packet writing
10/02/2008 10:05:00 AM info Writing speed requested x8.0, effective x8.0
10/02/2008 10:05:00 AM info Available write speed: 8x, 6x, 4x, 2x
10/02/2008 10:05:00 AM info Media ID: CMC MAG. AM3
10/02/2008 10:05:00 AM info Media type: DVD-R
10/02/2008 10:05:00 AM info Ultra DMA mode 2 (ATA33)
10/02/2008 10:04:58 AM info Scanned files #44, folder #2 - total size 4509407232 b. (4.2 Gb.)
10/02/2008 10:04:58 AM info Inserted media type : DVD-R
10/02/2008 10:04:58 AM info Write started
10/02/2008 10:04:48 AM info New media inserted. Burning layer is ready to write
10/02/2008 9:46:10 AM info Compatible media types : DVD-R, DVD-RW Seq., DVD-RW RO, DVDRAM, DVD+R, DVD+RW, CD-R, CD-RW, DL DVD+R, DL DVD-R
10/02/2008 9:46:10 AM info New Drive selected : 1:1:0 - PHILIPS DVD-RAM SDVD8821 EX04 [E] (Ide)
10/02/2008 9:44:46 AM info Current Drive selected : 1:1:0 - PHILIPS DVD-RAM SDVD8821 EX04 [E] (Ide)
10/02/2008 9:44:46 AM info Using Patin-Couffin driver Version 1.37, Internal revision 37 - Async. Access mode
10/02/2008 9:44:46 AM info User default language : 3081 (0x0C09h) - English (Australian)
10/02/2008 9:44:46 AM info System default language : 3081 (0x0C09h) - English (Australian)
10/02/2008 9:44:46 AM info DLL Version 2.1.7.338
10/02/2008 9:44:46 AM info DLL C:\Program Files\DVDFab Platinum 4\vso_hwe.dll
10/02/2008 9:44:46 AM info Version 4, 0, 6, 2
10/02/2008 9:44:46 AM info ExeName : "C:\Program Files\DVDFab Platinum 4\DVDFabPlatinum.exe"
10/02/2008 9:44:46 AM info OS : Professional (Build 6000)
10/02/2008 9:44:46 AM info ******************** Report session started ********************


10/02/2008 10:40:48 AM info Finalization Time 00:01:29 - Total completion time 00:29:37
10/02/2008 10:40:48 AM info WRITE SUCCESS
10/02/2008 10:39:18 AM info Write finished in 00:28:07 - Finalization start here. Avg. burn rate 2.12
10/02/2008 10:11:18 AM info Lead-in burning time (mS) 7308
10/02/2008 10:11:11 AM info Write started 2202432 sectors to write
10/02/2008 10:11:11 AM info Init success: DVD-R packet writing
10/02/2008 10:11:11 AM info Writing speed requested x4.0, effective x4.0
10/02/2008 10:11:10 AM info Available write speed: 4x, 2x
10/02/2008 10:11:10 AM info Media ID: MJC M005
10/02/2008 10:11:10 AM info Media type: DVD-R
10/02/2008 10:11:10 AM info Ultra DMA mode 2 (ATA33)
10/02/2008 10:11:08 AM info Scanned files #44, folder #2 - total size 4509407232 b. (4.2 Gb.)
10/02/2008 10:11:08 AM info Inserted media type : DVD-R
10/02/2008 10:11:08 AM info Write started
10/02/2008 10:10:59 AM info New media inserted. Burning layer is ready to write
10/02/2008 10:09:01 AM error Write error at 229888 (16) - Code 05 21 02 [Illegal request, Invalid address for Write]
10/02/2008 10:09:01 AM warning Reporting invalid address for write during recovery - trying to continue
10/02/2008 10:09:01 AM warning at sector 229872 (16) - recover sequence started
10/02/2008 10:09:01 AM warning Write error - Code 03 0C 00 [Write error] - Info 0 - CSI 0
10/02/2008 10:09:01 AM info Try #0 - duration 50197685 µs
10/02/2008 10:05:13 AM info Lead-in burning time (mS) 12960
10/02/2008 10:05:00 AM info Write started 2202432 sectors to write
10/02/2008 10:05:00 AM info Init success: DVD-R packet writing
10/02/2008 10:05:00 AM info Writing speed requested x8.0, effective x8.0
10/02/2008 10:05:00 AM info Available write speed: 8x, 6x, 4x, 2x
10/02/2008 10:05:00 AM info Media ID: CMC MAG. AM3
10/02/2008 10:05:00 AM info Media type: DVD-R
10/02/2008 10:05:00 AM info Ultra DMA mode 2 (ATA33)
10/02/2008 10:04:58 AM info Scanned files #44, folder #2 - total size 4509407232 b. (4.2 Gb.)
10/02/2008 10:04:58 AM info Inserted media type : DVD-R
10/02/2008 10:04:58 AM info Write started
10/02/2008 10:04:48 AM info New media inserted. Burning layer is ready to write
10/02/2008 9:46:10 AM info Compatible media types : DVD-R, DVD-RW Seq., DVD-RW RO, DVDRAM, DVD+R, DVD+RW, CD-R, CD-RW, DL DVD+R, DL DVD-R
10/02/2008 9:46:10 AM info New Drive selected : 1:1:0 - PHILIPS DVD-RAM SDVD8821 EX04 [E] (Ide)
10/02/2008 9:44:46 AM info Current Drive selected : 1:1:0 - PHILIPS DVD-RAM SDVD8821 EX04 [E] (Ide)
10/02/2008 9:44:46 AM info Using Patin-Couffin driver Version 1.37, Internal revision 37 - Async. Access mode
10/02/2008 9:44:46 AM info User default language : 3081 (0x0C09h) - English (Australian)
10/02/2008 9:44:46 AM info System default language : 3081 (0x0C09h) - English (Australian)
10/02/2008 9:44:46 AM info DLL Version 2.1.7.338
10/02/2008 9:44:46 AM info DLL C:\Program Files\DVDFab Platinum 4\vso_hwe.dll
10/02/2008 9:44:46 AM info Version 4, 0, 6, 2
10/02/2008 9:44:46 AM info ExeName : "C:\Program Files\DVDFab Platinum 4\DVDFabPlatinum.exe"
10/02/2008 9:44:46 AM info OS : Professional (Build 6000)
10/02/2008 9:44:46 AM info ******************** Report session started ********************



btw....My DVD burner is a Phillips DVD-RAM SDVD8821 ATA Device using Driver Microsoft 6.0.6000.16386 dated 21.06.2006 in Region Code 4. Am also using Vista operating software.

Any assistance would be much appreciated.
default_avatar
Today (MyCE Staff)
Posts: 15,596
Looking for the latest version of DVDFab? Lost your registration key?

Click here for more info.
Old Posted: 15-02-2008
alan1476's Avatar
alan1476 (Senior Moderator and Software Editor)
Posts: 15,752
  • Find More Posts by alan1476 alan1476 is online now
Start by using some decent media like Verbatim or taiyo Yuden, not Media ID: CMC MAG. AM3. Please use a normal font when posting, its the forum standard. Thankyou.
__________________
I do not provide technical support over E-mail or Private Message Please post your questions on the Forum
Sign up to CD Freaks
Register Here
FORUM RULES
Need some help ? Please use our search function first
Join us on the CDFreaks Folding@Home Team! Read more here
Get WinDWFlash HERE
My Computer specs are HERE
Old Posted: 15-02-2008
maineman's Avatar
maineman (CDFreaks Resident)
Posts: 5,269
  • Find More Posts by maineman
Hi, Bldhnd71 and welcome to cdfreaks,

Yup, as Alan said, this is more than likely a media problem...use some quality media like Taiyo Yuden and Verbatim.

Also recommend the following:
Common Settings > DVD > Write > Write Type of DVD-R Media
Change from Packet Writing to SAO
__________________
If it ain't broke, don't fix it!

You know how to whistle, don't you, Steve? You just put your lips together and... blow. | Lauren Bacall | "To Have and Have Not" (1944).
Old Posted: 15-02-2008
blutach's Avatar
blutach (Banned)
Posts: 896
  • Find More Posts by blutach
You poor fellow. You paid $1 a disk for CMCs?!!! That's highway robbery. Get some Verbs or Taiyo Yudens as said above.

Try www.pcx.com.au - they're good folks.

Regards
Old Posted: 16-02-2008
default_avatar
Bldhnd71 (New on Forum)
Posts: 4
  • Find More Posts by Bldhnd71
Alan, Main, & Bluey,

Thanks all for your advice...I'll certainly try to useother media.

Attamepted to change the Write Type of Media to SAO, with media i have , and no difference.

Also tried after defraging disk, but still no differnece.

Just can't understand why it changed without warning, with no standard fix??
Old Posted: 16-02-2008
blutach's Avatar
blutach (Banned)
Posts: 896
  • Find More Posts by blutach
SAO won't help you. You need better media. Make sure your firmware is up to date, too and your DMA is on on all IDE channels.

Regards
Old Posted: 16-02-2008
troy512's Avatar
troy512 (Wii Freak)
Posts: 4,183
  • Find More Posts by troy512
Quote:
10/02/2008 10:11:11 AM info Writing speed requested x4.0, effective x4.0
10/02/2008 10:11:10 AM info Available write speed: 4x, 2x
10/02/2008 10:11:10 AM info Media ID: MJC M005
10/02/2008 10:11:10 AM info Media type: DVD-R
what are these?

Quote:
...purchased some more expensive DVD-R’s being MagMedia 1-16x 4.7GB priced at AUD$1.00 each.
ive not read though this but maybe you will find something helpful.
http://club.cdfreaks.com/f92/philips...please-196932/
__________________
Hack any Wii from System Menu 3.0 - 4.2 very easily!
Old Posted: 16-02-2008
default_avatar
Bldhnd71 (New on Forum)
Posts: 4
  • Find More Posts by Bldhnd71
Got some Verbatim discs today @ AUD$0.50 each. Couldn't wait to test it!!

Tried tha same movies as per previous, and by crikey, the little buggers worked.

I don't understand it, and its got me buggered, but it works. All five different movies came out spot on.

Thanks for all your help ppl.

Bluey...Got no idea what your talking about mate. Understood those acronyms from the army, but DMA, IDE????
Old Posted: 16-02-2008
default_avatar
Bldhnd71 (New on Forum)
Posts: 4
  • Find More Posts by Bldhnd71
Troy,

I'm pretty certain those were the MagMedia DVD-R's

Thanks for the link. Its got me a bit concerned now though, as i have that type of cd/dvd burner, but the Acer notebook is a model 5620, so hopefully all is ok.

But something to keep mindfull of though.

Thanks for the tip!!
Old Posted: 17-02-2008
blutach's Avatar
blutach (Banned)
Posts: 896
  • Find More Posts by blutach
DMA = Direct Memory Access - see http://forum.digital-digest.com/show...threadid=44808

Regards
Old Posted: 17-02-2008
alan1476's Avatar
alan1476 (Senior Moderator and Software Editor)
Posts: 15,752
  • Find More Posts by alan1476 alan1476 is online now
Quote:
Originally Posted by Bldhnd71 View Post
Got some Verbatim discs today @ AUD$0.50 each. Couldn't wait to test it!!

Tried tha same movies as per previous, and by crikey, the little buggers worked.

I don't understand it, and its got me buggered, but it works. All five different movies came out spot on.

Thanks for all your help ppl.

Bluey...Got no idea what your talking about mate. Understood those acronyms from the army, but DMA, IDE????
Hi, we have a great guide to understand UDMA right here at CDF.
http://club.cdfreaks.com/f61/trouble...-me-9x-101616/
__________________
I do not provide technical support over E-mail or Private Message Please post your questions on the Forum
Sign up to CD Freaks
Register Here
FORUM RULES
Need some help ? Please use our search function first
Join us on the CDFreaks Folding@Home Team! Read more here
Get WinDWFlash HERE
My Computer specs are HERE
Hello guest,
default
To benefit from all extra features you need to log in or sign up.
signup log in

Subscribe to our weekly newsletter!

Get weekly updates from MyCE!

Search this Thread

New Posts

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Similar Threads

People who found this also searched for

  • philips dvd-ram sdvd8821 region
  • cannot write medium - incompatible format philips dvd-ram sdvd8821
  • direct memory access dvdfab
  • dma direct memory access dvdfab
  • driver sdvd8821 ata device
  • dvd fab writing error
  • dvd sdvd8821.exe
  • dvd-r magmedia
  • dvdfab direct memory access
  • dvdfab love
  • dvdfab write error
  • dvdfab write problems
  • dvdfab write rror
  • dvdfab writing error
  • firmware philips dvd-ram sdvd8821 ata device
  • i love dvdfab
  • philips dvd+r dl dvdfab
  • philips dvd-ram sdvd8821 ata device
  • philips dvd-ram sdvd8821 not working
  • philips dvd-ram sdvd8821 rvision
  • philips dvd-ram sdvd8821 specs
  • philips sdvd8821 ata device firmware english
  • relationship club
  • write erro dvdfab
  • write error at 229872 code 05 21 00
All times are GMT +2. The time now is 02:55.
Top

Automatic translations supported by vBET 3.3.3