DVDFAB 8112Qt makes my computer shut down
| DVDFab / DVD Region+CSS Free Discuss, DVDFAB 8112Qt makes my computer shut down at Movie copy software forum; Quote: |
-
Posted:
10-09-2011
- # 26
Good night ChrissyQuote:Originally Posted by chrissy_ozzstyle
Tim
You have done your good deed for the day. It burnt
I must say that the sound is really low - i turned all my speakers up high but didn't change much. So is that something I need to look at in imgburn (maybe change a settle for sound?)
I'll let you think about that one lol
Cause it's now 3am here and this female needs her beauty sleep - but because of your help and will now be able to sleep lol
nite
hugs from chrissy
sweet dream 
Yak at you later on the sound which has nothing to do with ImgBurn.
SJ
- Today (MyCE Staff)
- Posts: 15,596
- Posted:
11-09-2011
- # 27
Hey Chrissy
The only time I have an issue with the sound to low is when I do a backup with the 5.1 audio track and play it on my TV which doesn't have the 5.1 speaker setup.
As far as I know DVDFab has no setting to increase volume, if you use main movie mode you are able to change the default audio track to what ever your playback device supports.
If need be there is a free program that I use that can be used to increase the volume, however since this is the DVDFab forum I will only give help with that program in either the movie copy software forum or by PM.__________________
. ~ My Signature ~
.............DVDFab:
Guides, Tutorials & FAQ
Knowledge-Base
... Magic DVD Ripper:
Description and Functionalty of Magic DVD Ripper - Posted:
11-09-2011
- # 28
@ SJ , I understand if a software is not a competitor of DVDFab it is OK to post about it in the DVDFab forum. DVDShrink is the best example of this since many use it as the compressor when using the free after trial version of DVDFab.Quote:Originally Posted by StormJumper If need be there is a free program that I use that can be used to increase the volume, however since this is the DVDFab forum I will only give help with that program in either the movie copy software forum or by PM.
BTW I got this from what another mod posted so not just my own thoughts on this.
A different mod also made a good point on staying with the specific software of a subforum . His response was basically this. " If you post about a different software & say "this software does it better" . That doesn't help the OP solve the problem with software they have already bought. IMO a good point.
So IMO if a software is competition to be used instead of DVDFab then no posts about it allowed. If a software is to be used in conjunction with or as an aid DVDFab then it should be OK .__________________
cholla pronounced ˈchȯi-yə click on cholla to hear - Posted:
11-09-2011
- # 29
Quote:Originally Posted by cholla @ SJ , I understand if a software is not a competitor of DVDFab it is OK to post about it in the DVDFab forum. DVDShrink is the best example of this since many use it as the compressor when using the free after trial version of DVDFab.
BTW I got this from what another mod posted so not just my own thoughts on this.
A different mod also made a good point on staying with the specific software of a subforum . His response was basically this. " If you post about a different software & say "this software does it better" . That doesn't help the OP solve the problem with software they have already bought. IMO a good point.
So IMO if a software is competition to be used instead of DVDFab then no posts about it allowed. If a software is to be used in conjunction with or as an aid DVDFab then it should be OK .The above quote from Alan is what we go by here in the DVDFab forum, although we have and still do talk about other products we use in the DVD FAB Products Discussion Thread help is not given on them, "at the discretion of CDF Moderators" is the key factor of Alan's statement and rule of all forums.Quote:Originally Posted by alan1476 Please understand that we have different sub-forums here in the movie copy software forum, this sub-forum is to discuss DVD Fab products only. Other products have their own forums. If you have a question or need any assistance with Fab products post here. Please do not use this forum for promoting other brands of software or linking to other forums that provide them. Posts may be deleted or edited or moved at the discretion of CDF Moderators if we find that this has been violated. If your favorite software is not DVD FAB than please discuss it in its proper sub-forum. Thank you.
Even if a software is not a competitor doing what you suggest would open the door for the discussion on other software which would lead to confusion over time
SJ
Last edited by StormJumper; 11-09-2011 at 17:30. - Posted:
11-09-2011
- # 30
First my apologies to chrissy_ozzstyle for taking the thread some off topic. I would like to get it back on topic.
I accept that & go by it . I just sometimes bring a point like this up for discussion . It IMO helps to clarify things.Quote:Originally Posted by StormJumper "at the discretion of CDF Moderators" is the key factor of Alan's statement and rule of all forums.
SJ , That sounds reasonable & I guess I hadn't caught on to that . Help is not given for other software even when it is posted in the subforum . I didn't check but I thought I had seen help with using DVDShrink to compress a rip with DVDFab given.Quote:Originally Posted by StormJumper although we have and still do talk about other products we use in the DVD FAB Products Discussion Thread help is not given on them
I get that but that is what moderation is for . Not letting it get out of control.Quote:Originally Posted by StormJumper Even if a software is not a competitor doing what you suggest would open the door for the discussion on other software which would lead to confusion over time
This is also is a quote from Alan:
On the lower sound. I have one standalone that records sound at a muck lower level than other standalones I have.Quote:Originally Posted by alan1476 We try to deal with each and every instance individually. Some things can pass, and others cannot, so its really hard to make a new rule about this. Like I said, we want people to enjoy themselves here, and not be harassed or made to feel uncomfortable. Each instance is evaluated on a case by case basis, there is no blanket policy.
So chrissy_ozzstyle have you had the lower sound level any time previously ? For example with an older version of DVDFab.__________________
cholla pronounced ˈchȯi-yə click on cholla to hear - Posted:
12-09-2011
- # 31
Thank youQuote:Originally Posted by cholla I accept that & go by it . I just sometimes bring a point like this up for discussion . It IMO helps to clarify things. and nothing wrong bringing up a point for clarification. - Posted:
12-09-2011
- # 32
It was the PMs between each other that got this solved or should I say gave me the flashback on a few thingsQuote:Originally Posted by AGJ chrissy glad it working for you now that figured out what the problem was
__________________
. ~ My Signature ~
.............DVDFab:
Guides, Tutorials & FAQ
Knowledge-Base
... Magic DVD Ripper:
Description and Functionalty of Magic DVD Ripper - Posted:
30-01-2012
- # 33
Hello, I am new to this forum so I hope I am doing this correctly. I know this is an old post, but I am having the exact same problem, only it is a dell pc. The dvd fab version is 8.1.5.9 qt. actually it is on my friends computer. I have dvd fab on mine and I have not had this problem. I recommended that she buy it so I feel responsible to fix it. I downloaded and installed imgburn as suggested in this forum. I followed the instructions to set it up but it just keeps doing the same thing. Can someone please help? Thank you,Quote:Originally Posted by chrissy_ozzstyle Hi, thanks for peoples replies, heck not good if the computer or dvd burner is overheating i mean this computer is only like 2 weeks old and i have it on a top quality cooler as well.
I'm adding what the message says when it crashes. I updated to DVDFAB8116 but still had the same problem, then i tried to use version 6 and version 7 an version 8105 all had problems.
Querry about using an external harddrive, that is fine to burn the dvd too - but the problem is i have to use my internal dvd player to read the dvd and it's in the reading of the dvd that it crashes.
OK so I updated my DVDFAB to 8116Qt but it still crashed my computer - this is what the crash screen comes up with:
A problem has been detected and windows ha been shut down to prevent damage to your computer
DRIVER_IRQL_NOT_LESS_OR_EQUAL
If this is the first time you’ve seen this stop error screen, restart your computer, if this screen appears again, follow these steps
Check to make sure any new hardware or software is properly installed. If this is a new installation as your hardware or software manufacturer for any windows updates you might need.
If problem continues, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing, if you need to use safe mode to remove or disable components, restart your computer, press F8 to select advanced startup options, and then select safe mode.
Technical information
***STOP: 0x00000001 (0x0000000000000000, 0x0000000000000002,0x0000000000000008,0x0000000000000000)
Collecting data from crash dump…
Initializing disk for crash dump…
Beginning dump of physical memory
Dumping physical memory to disk: 100
Lisa - Posted:
31-01-2012
- # 34
Hi LisaQuote:Originally Posted by lks9042 Hello, I am new to this forum so I hope I am doing this correctly. I know this is an old post, but I am having the exact same problem, only it is a dell pc. The dvd fab version is 8.1.5.9 qt. actually it is on my friends computer. I have dvd fab on mine and I have not had this problem. I recommended that she buy it so I feel responsible to fix it. I downloaded and installed imgburn as suggested in this forum. I followed the instructions to set it up but it just keeps doing the same thing. Can someone please help? Thank you,
Lisa
Welcome to the forum
Are you having problems during the burn process ? if so what is the burn speed set to ?, also please make sure the driver for the video grahpic card is up to date. - Posted:
31-01-2012
- # 35
Unless you tell us your computer specs we cannot help you. This software comes with a free trial, The free trial is there for a reason , not all all computers are equal. Most yes, some not. Just saying it a " Dell" does not help. Post a logfile of a the last failed try. If you had the exact same problem as the post above you should never have bought the software, the post above had problems with all the versions. __________________
I do not provide technical support over E-mail or Private Message Please post your questions on the Forum
Sign up to CD Freaks
Register Here
FORUM RULES
Need some help ? Please use our search function first
Join us on the CDFreaks Folding@Home Team! Read more here
Get WinDWFlash HERE
My Computer specs are HERE Take a look New rig
- Posted:
31-01-2012
- # 36
it never gets to the burn process. it copies the dvd, and then the tray pops out to put a blank disc in and at the same time the pc starts the shutdown process saying that it is shutting down to prevent damage to your system. etc. As I said it is on my friends computer so I do not have a copy of the log file. I wouldn't know how to make one anyway. But the message was exactly the same as the post that I replied to from "chrissy" I think. I will check the the video card driver as you suggested and go from there. - Posted:
31-01-2012
- # 37
Hi Lisa
Please go into common settings and click on "Read" located on the left side, on the read settings page at the bottom place a check mark in the box next to "Do not eject the source disc when finished copying", and try again if you still have the shut down issue try selecting c/user/user name/documents/DVDFab in the target drop down and give that a shot. - Posted:
31-01-2012
- # 38
Hi Storm Jumper,Quote:Originally Posted by lks9042 it never gets to the burn process. it copies the dvd, and then the tray pops out to put a blank disc in and at the same time the pc starts the shutdown process saying that it is shutting down to prevent damage to your system. etc. As I said it is on my friends computer so I do not have a copy of the log file. I wouldn't know how to make one anyway. But the message was exactly the same as the post that I replied to from "chrissy" I think. I will check the the video card driver as you suggested and go from there.
thanks for replying so quickly. Everything is up to date. I am now trying your next suggestion, which is checking the box to not eject the disc after copying. But, should I still have it set up to use image burn as the burn engine?
Another question is, shouldn't I be able to use the temp file that DVD Fab created to burn the disc? I have tried this several times and it shows the file folder as being there but not the files. I know the files are there but they are not the ones that DVD FAb is looking for. This is all way over my head but I am trying to make work. Thanks so much for your help.
- Posted:
31-01-2012
- # 39
What do you mean ..."The files are there but not ones DVDFab is looking for" ?, the only time I've heard of missing files after the rip was .ISO after DVDFab created them but that issue has not been reported in a long time.Quote:Originally Posted by lks9042 Hi Storm Jumper,
thanks for replying so quickly. Everything is up to date. I am now trying your next suggestion, which is checking the box to not eject the disc after copying. But, should I still have it set up to use image burn as the burn engine?
Another question is, shouldn't I be able to use the temp file that DVD Fab created to burn the disc? I have tried this several times and it shows the file folder as being there but not the files. I know the files are there but they are not the ones that DVD FAb is looking for. This is all way over my head but I am trying to make work. Thanks so much for your help. - Posted:
31-01-2012
- # 40
when I try to open the file in the source field in DVD Fab the folder is there but it shows no files. But when I open the same file outside of DVD FAb it shows files there. For Ex: VTS_01_1, VTS_01_0.bup, VIDEO_TS.Bup VTS_01_TS.BUP. Those are all of the different kinds of files in one folder. So, I assumed those must not be the file extensions that DVD FAb was looking to open since they don't show up when I open the folder in DVD FAb. I am clueless when it comes to video file extensions so I didn't know how else to explain it. Anyway, I did get dvd fab to work on my friends pc by changing the target file to the temp folder as you suggested. But it doesn't automatically open image burn. You have to close out of dvd fab and then open image burn. It took awhile to figure out how to burn it that way but it worked! Thank you so much for all of your help!
Also, after more searching I did find more people in the DVD fab Forum that had the same problem and they were all newer laptops. Their solutions were all the same to do it in a 2 step process. One of them mentioned that he thought Silverlight might have been conflicting with DVD FAb, but that doesn't make any sense to me. I thought I would mention it anyway. Maybe it will help someone else in the future. - Posted:
31-01-2012
- # 41
Those are standard DVD Video files and they're the ones you need to burn to the final DVD.Quote:Originally Posted by lks9042 But when I open the same file outside of DVD FAb it shows files there. For Ex: VTS_01_1, VTS_01_0.bup, VIDEO_TS.Bup VTS_01_TS.BUP.
You can set up DVDFab to use ImgBurn and burn them automatically for you or alternatively you can burn the finished files manually with ImgBurn if you prefer.
There's a guide for setting up DVDFab with ImgBurn in SJ's signature and it's the recommended burn engine for DVDFab.
Wombler__________________
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Forum Help: Forum Rules, MyCE Help Centre
If you find these forums useful then: Register Here
DVDFab/ImgBurn: Choosing the correct Layer Break Position in ImgBurn
DVDFab: BDMV-REC Supported Burners
Reviews: Ideal DVD Copy, Magic DVD Copier
- Posted:
31-01-2012
- # 43
If this issue was or is on a laptop try connecting an external DVD burner and select the external burner as the target, here is the guide...Quote:Originally Posted by lks9042 thank you, but how do I get to his signature file?
http://club.myce.com/f116/guide-how-...1/#post2547021 - Posted:
31-01-2012
- # 44
Sorry, he's stopped using it for some reason.Quote:Originally Posted by lks9042 thank you, but how do I get to his signature file?
It used to be at the bottom of all his posts.
Wombler__________________
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Forum Help: Forum Rules, MyCE Help Centre
If you find these forums useful then: Register Here
DVDFab/ImgBurn: Choosing the correct Layer Break Position in ImgBurn
DVDFab: BDMV-REC Supported Burners
Reviews: Ideal DVD Copy, Magic DVD Copier
People who found this also searched for
- 0x000000d1 (0x0000000000000000 0x0000000000000002 0x0000000000000008 0x0000000000000000
- 0x00000001 (0x0000000000000000 0x0000000000000002 0x0000000000000008 0x0000000000000000)
- 0x000000d1 ( 0x0000000000000000 0x0000000000000002 0x0000000000000008 0x0000000000000000)
- 0x000000d1 (0x0000000000000000 0x0000000000000002 0x0000000000000008 0x0000000000000000)
- 0x000000d1 0000000000000008
- 0x000000d1 dvd fab
- 0x000000d1 error using dvdfab
- 8.1.1.2
- 8112 or 8.1.1.2 fab serial or key
- 8112 fab key or serial
- “0x00000001 0x0000000000000000 0x0000000000000002 0x0000000000000008 0x0000000000000000”
- bios shadowing and caching dvdfab
- burner makes computer shut down
- chave dvdfab 8112
- clean remove dvdfab
- clean uninstall dvdfab
- computer crash dvdfab
- computer crasher ved dvdfab
- computer crashes afte using dvd fab
- computer crashes running dvdfab
- computer crashes when dvd fab
- computer goes off can i complete dvd fab
- computer keeps crashing using dvdfab
- computer keeps shutting down after dvdfab
- computer keeps shutting down while running dvd fab
- computer keeps shutting down while running dvdfab
- computer shut off while burning dvdfab
- computer shutdown caused by dvdfab
- computer shuts down after backing up dvd with dvd fb