DVDFab 4.0.6.2 is out

I have the same problem. The source does not read

I have the same problem

I didn't have trouble with the copy process but I did have trouble once I started burning the files with Nero. Anyone know if Gone Baby Gone has protective measures that 4.0.6.2 can't handle? I got an "error reading data" error about 15 seconds into the burn.

Ok, I got it to work, finally. It wouldn't work correctly if you used the "Customize" menu. I think it must be a PathPlayer issue. It rips just fine to the hard disk but then you can't play it.

I got it to work by doing a FullDisc backup to the hard drive. Then I used the Customize menu to grab the pieces that I wanted. Then I was able to burn directly onto a DVD-5.

-IP

Yes, along with Across the Universe and American Gangster.
I slowed the burning speed down, and it still errors out.
Installed a new burner, still errors out. Any ideas?

2/16/2008 10:04:15 AM error Write error at 0 (16) - Code 03 73 03 [Medium error, Power calibration fail (CD-burner is dirty)]
2/16/2008 10:04:01 AM info Write started 2201600 sectors to write
2/16/2008 10:04:01 AM info Init success: DVD-R packet writing
2/16/2008 10:04:01 AM info Writing speed requested x2.0, effective x2.0
2/16/2008 10:04:01 AM info Available write speed: 8x, 6x, 4x, 2x
2/16/2008 10:04:01 AM info Media ID: RITEKG05
2/16/2008 10:04:01 AM info Media type: DVD-R
2/16/2008 10:04:01 AM info Ultra DMA mode 4 (ATA66)
2/16/2008 10:03:58 AM info Scanned files #119, folder #2 - total size 4507531264 b. (4.2 Gb.)
2/16/2008 10:03:58 AM info Inserted media type : DVD-R
2/16/2008 10:03:58 AM info Write started
2/16/2008 10:03:57 AM info New media inserted. Burning layer is ready to write
2/16/2008 10:03:55 AM info Compatible media types : DVD-R, DVD-RW Seq., DVD-RW RO, DVDRAM, DVD+R, DVD+RW, CD-R, CD-RW, DL DVD+R, DL DVD-R
2/16/2008 10:03:55 AM info New Drive selected : 0:1:0 - LITE-ON DVDRW LH-18A1P GL0F [G] (Ide)
2/16/2008 10:03:33 AM info New media inserted. Burning layer is ready to write
2/16/2008 10:03:30 AM info Current Drive selected : 0:1:0 - LITE-ON DVDRW LH-18A1P GL0F [G] (Ide)
2/16/2008 10:03:30 AM info Using Patin-Couffin driver Version 1.37, Internal revision 37 - Async. Access mode
2/16/2008 10:03:30 AM info User default language : 1033 (0x0409h) - English (United States)
2/16/2008 10:03:30 AM info System default language : 1033 (0x0409h) - English (United States)
2/16/2008 10:03:30 AM info DLL Version 2.1.7.338
2/16/2008 10:03:30 AM info DLL C:\Program Files\DVDFab Platinum 4\vso_hwe.dll
2/16/2008 10:03:30 AM info Version 4, 0, 6, 2
2/16/2008 10:03:30 AM info ExeName : "C:\Program Files\DVDFab Platinum 4\DVDFabPlatinum.exe"
2/16/2008 10:03:30 AM info OS : Microsoft Windows XP Professional Service Pack 2 (Build 2600)
2/16/2008 10:03:30 AM info ******************** Report session started ********************


2/16/2008 8:44:02 AM info ******************** Report session closed *********************
2/16/2008 1:16:01 AM error Write error at 11696 (16) - Code 05 21 02 [Illegal request, Invalid address for Write]
2/16/2008 1:13:05 AM info Lead-in burning time (mS) 25644
2/16/2008 1:12:40 AM info Write started 2186880 sectors to write
2/16/2008 1:12:40 AM info Init success: DVD-R packet writing
2/16/2008 1:12:40 AM info Writing speed requested x4.0, effective x8.0
2/16/2008 1:12:37 AM info Available write speed: 8x, 6x, 4x, 2x
2/16/2008 1:12:37 AM info Media ID: RITEKG05
2/16/2008 1:12:37 AM info Media type: DVD-R
2/16/2008 1:12:37 AM info PIO Mode
2/16/2008 1:12:35 AM info Scanned files #9, folder #2 - total size 4477607936 b. (4.17 Gb.)
2/16/2008 1:12:35 AM info Inserted media type : DVD-R
2/16/2008 1:12:35 AM info Write started
2/16/2008 12:33:52 AM info New media inserted. Burning layer is ready to write
2/16/2008 12:33:51 AM info Compatible media types : DVD-R, DVD-RW Seq., DVD-RW RO, DVD+R, DVD+RW, CD-R, CD-RW, DL DVD+R
2/16/2008 12:33:51 AM info New Drive selected : 0:1:0 - TSSTcorp CD/DVDW TS-H552U US06 [G] (Ide)
2/16/2008 12:32:41 AM info Current Drive selected : 0:0:0 - PIONEER DVD-RW DVR-110D 1.17 [F] (Ide)
2/16/2008 12:32:41 AM info Using Patin-Couffin driver Version 1.37, Internal revision 37 - Async. Access mode
2/16/2008 12:32:41 AM info User default language : 1033 (0x0409h) - English (United States)
2/16/2008 12:32:41 AM info System default language : 1033 (0x0409h) - English (United States)
2/16/2008 12:32:41 AM info DLL Version 2.1.7.338
2/16/2008 12:32:41 AM info DLL C:\Program Files\DVDFab Platinum 4\vso_hwe.dll
2/16/2008 12:32:41 AM info Version 4, 0, 6, 2
2/16/2008 12:32:41 AM info ExeName : "C:\Program Files\DVDFab Platinum 4\DVDFabPlatinum.exe"
2/16/2008 12:32:41 AM info OS : Microsoft Windows XP Professional Service Pack 2 (Build 2600)
2/16/2008 12:32:41 AM info ******************** Report session started ********************

You have some of the worst blank disks on the planet. Go get some Verbatims or Taiyo Yudens.

Regards

Could it be the problems after hundreds of them with this setup working fine?

No doubt. Perhaps the brand is the same but the disks are different. Ritek G05 destroyed Ritek's reputation. Believe me on this one. Get Verbs or Taiyo Yuden.

Whiel you're at it, update your firmware on the LiteOn to GL0J - http://forum.rpc1.org/dl_firmware.php?download_id=2340.

And on the Pioneer to version 1.41 - http://forum.rpc1.org/dl_firmware.php?download_id=2140

And on the Samsung to US09 - http://forum.rpc1.org/dl_firmware.php?download_id=2011

Regards

Ummmm sorry but I can't get this to start after installing it...
the computer just sits there, nothing comes up. Any suggestions?
Tried it on both my vista machine and my xp machine same results.

holdme

Not sure if this is the place to seek advice with a problem, so flame on if not.
I've been using DVDFab for about a year and DVDIdle longer. Love 'em both. Just upgraded DVDFab to 4.0.6.2 and it has allowed me to back up previously problematic DVD titles. However, today I had a curious problem wiht the new DVD "Becoming Jane". DVDFab burned a DVD copy just fine, however it won't create an iPod version. It goes through the various steps (in less than a minute) reporting that it successfully completed the task. It creates an empty folder .../ipod/BECOMING JANE but the mp4 file is nowhere to be found.

HELP! tia. Joe

Look in " My Documents" for a DVD Fab temp folder.

Wow, Thanks for the FAST reply!
I checked all the DVD folders in My Documents as well as Program Files, and the Application Data folders in the Documesnts and Settings folder for the system disk. No new mp4 files found.
The other ipod videos have taken at least and hour to generate. This session lasted less than a minute. I suspect that some section of code was just skipped altogether.
FWIW, this version of DVDFab was able to create ipod videos for 2 other relatively recent DVDs (Stardust and Stranger Than Fiction).

Thanks!

Joe

The conversion to MPEG4 should take about 1/2 hour with a good processor. Try it again and look to see what temp folder it is going to.

-

I've tried several times now to convert the file to ipod mp4. I was wrong, the total time elapsed is 2 seconds. I cannot find a temp file for this DVDFab session anywhere on the disk. All I can offer is the following from the log file:

02:11:00: Task 1
02:11:00: Source( G:\VIDEO_TS )
02:11:00: Video( Title=1, Angle=0, PlayTime=02:00:48, Chapter=1-17, AspectRatio=16:9 )
02:11:00: Audio( [80h] English AC-3/6 normal )
02:11:00: Target( C:\Documents and Settings\Owner\My Documents\Movies&Shows\ipod\BECOMING JANE\ )
02:11:01: Process completed successfully!

Perhaps the temp file(s) is being deleted on completion?

The machine I'm using is a Comcaq Presario with and 1.8 GHz Athlon XP 2200+ and 1G RAM. The disk has 24G of free space.

Under stttings, general uncheck delete temp files when done

Thanks Jim,

I attached another log file and the only temp file I could find on my PC for the same date/timeframe (it looks more like something from Windows update).

Dear DVDFab,
Again, I just want to say THANK YOU for the GREAT product!!!
Just made copy of 3 hours movie on one 4.7 DVD. Quality very good for viewing on my TV.
Great work!!!

cant get dvd fab to work with vista

Please do not cross post, it is breaking forum RULES.
I have made a reply in the thread you started