samsung SE-S184m Sb02

I flashed it and it says s Sh-S182m SB05? now? what is going on it should say SE-S184m?

anyway how to i reverse it from before?

You already asked the same question here (more than once) and I replied:

it did not identify as SH-S182M before but now after flash it does. I think i should undo back to SE-S184m. I jsut cant find the flash firmware file back to s184m anywhere

The SE-S184M is supposed to identify itself as a SH-S182M drive! This is normal behaviour!

If you don't believe me, have a look in our Samsung SE-S184M Review.

before it identified as SE-S184M. I wanna return it too SE-S184m with Sb02.

Unfortunately, there is no way to return to SB02 with the S184 name. The firmware was never released as a standalone file, and there is no way to get the firmware off of other SE-S184M drives, or from anywhere else.

I would like to note, however, that on the Samsung ODD support site, under SB05 for the S184M, it states:

& you are given the link to download SB05 for the SH-S182M. There is no other firmware to download, and the drive works exactly the same no matter what the name is. So even Samsung themselves tell you to ignore the name change.

[See DrageMester's post below.]

Samsung SH-S182M firmware from SB00 to SB05 can be downloaded here. These are also the correct firmwares for the SE-S184M drive; there is NO separate firmware download for the SE-184M.

i dont know doesnt SB05 firmware work worse then SB02

Don't ask me, I don't have this drive.

Not for me.