Changing Hard Drive in the 5045

Just got off the phone with Liteon level 2.

Very helpful tech guy there said the following:

1. Liteon is using the Seagate 160gb hard drive and the firmware is set up to recognize the "model number" of the hard drive unit. ((Also said it might be the Maxtor unit)) Unit will not accept non conforming hard drives.

2. Hard drive is basically just a 32 bit formatted blank single partition. All the rest of the set up is done by the firmware on the machine itself.

3. The 5045 is basically the 5005 with the hard drive tacked on.

From a previous call I got that they are working on a high def unit that should be networked via ethernet allowing for editing of the liteon files via the computer in an easy highlight and delete type operation.

Any other info and hints anyone has to share would be appreciated==I know I will try to swap harddrives "eventually."

---

Last edited by leaglebob; 23-08-2005 at 03:04. Reason: add notification

What's the time storage capacity of that 160gb drive? (How lazy would I be able to be about getting things burned to disc before I HAD to so's to clear room on the drive?)

Gee Gastrof==it all depends on the "quality settings" you use. I use the lowest settings giving me 6 hours per dvd which equates to about 1 hour of video per gig of storage==just about 160 hours. If this setting ((standard mpeg 1 at 352 X 240 and 1150 kps)) is increased, then there are fewer hours of storage.

As you burn to dvd, you can delete the material==so what you really have is a 160GB buffer in front of your burner.